Currently the echo canceller reference signal is high-pass filtered to
avoid the need of modeling the capture-side high-pass filter as part of
the echo path.
This can lead to the lowest frequency bins of the linear filter
diverging as there is little low-frequency content available for
training. Over time the filter can output an increasing amount of
low-frequency power, which in turn affects the filter's ability to
adapt properly.
Disabling the high-pass filtering of the echo canceller reference solves
this issue, resulting in improved filter convergence.
Bug: webrtc:12265
Change-Id: Ic526a4b1b73e1808cfcd96a8cdee801b96a27671
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/208288
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33322}
- The injection of the AGC2 level estimator into `AgcManagerDirect`
is not used anymore
- `ExperimentalAgc::enabled_agc2_level_estimator` can also be removed
- 3 ctors of `ExperimentalAgc` are unused
- `AgcManagerDirectStandaloneTest::AgcMinMicLevelExperiment` can be
split into separate unit tests (better code clarity)
Bug: webrtc:7494
Change-Id: I5843147c38cf7cb5ee484b0a72fe13dcf363efaf
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/202025
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33027}
AGC2 is correctly (re)initialized when its config changes.
This CL also improves the `AudioProcessingImpl::ApplyConfig`
readability by defining operator!= also for the AGC1 config.
Bug: webrtc:7494
Change-Id: I62068de32c941e6b18d4618c656f569647042345
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/187120
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32402}
This is a reland of ad148272b8
Original change's description:
> Activating AVX2 support by default
>
> This CL activates the newly added AVX2 support by default.
> The activation is done beneath a kill-switch.
>
> Beyond the above, the CL also changes an incorrect DCHECK_GT
> to a DCHECK_GE.
>
> Bug: webrtc:11663
> Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32193}
Bug: webrtc:11663, chromium:1134234
Change-Id: I0cb34cf08d4d14bc3aee055254493c9c9ee8faa0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186401
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32303}
This is a reland of ad148272b8
Original change's description:
> Activating AVX2 support by default
>
> This CL activates the newly added AVX2 support by default.
> The activation is done beneath a kill-switch.
>
> Beyond the above, the CL also changes an incorrect DCHECK_GT
> to a DCHECK_GE.
>
> Bug: webrtc:11663
> Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32193}
Bug: webrtc:11663
Change-Id: Ib41dc1d1c5865f2828699c462939d15d5562df47
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186262
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32270}
This reverts commit ad148272b8.
Reason for revert: Speculative revert to investigate test failures
Original change's description:
> Activating AVX2 support by default
>
> This CL activates the newly added AVX2 support by default.
> The activation is done beneath a kill-switch.
>
> Beyond the above, the CL also changes an incorrect DCHECK_GT
> to a DCHECK_GE.
>
> Bug: webrtc:11663
> Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32193}
TBR=mbonadei@webrtc.org,saza@webrtc.org,peah@webrtc.org,kwiberg@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:11663
Change-Id: Ibb019e8c702dce45ebf47f1c1e8db19069b4964d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186081
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32259}
This is a reland of ad148272b8
Original change's description:
> Activating AVX2 support by default
>
> This CL activates the newly added AVX2 support by default.
> The activation is done beneath a kill-switch.
>
> Beyond the above, the CL also changes an incorrect DCHECK_GT
> to a DCHECK_GE.
>
> Bug: webrtc:11663
> Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32193}
Bug: webrtc:11663
Change-Id: I669435c2f4e451ee0766d809443484f2dde09d8d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185482
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32200}
This reverts commit ad148272b8.
Reason for revert: Causing test failures downstream.
Original change's description:
> Activating AVX2 support by default
>
> This CL activates the newly added AVX2 support by default.
> The activation is done beneath a kill-switch.
>
> Beyond the above, the CL also changes an incorrect DCHECK_GT
> to a DCHECK_GE.
>
> Bug: webrtc:11663
> Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32193}
TBR=mbonadei@webrtc.org,saza@webrtc.org,peah@webrtc.org,kwiberg@webrtc.org
Change-Id: If2287a0a4b37931ce5f85baae093a66b19d0a78b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:11663
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185481
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32196}
This CL activates the newly added AVX2 support by default.
The activation is done beneath a kill-switch.
Beyond the above, the CL also changes an incorrect DCHECK_GT
to a DCHECK_GE.
Bug: webrtc:11663
Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32193}
This CL adds a build flag to allow building the non-test parts
of WebRTC without the audio processing module.
The CL also ensures that the WebRTC code correctly handles
the case when no APM is available.
Bug: webrtc:5298
Change-Id: I5c8b5d1f7115e5cce2af4c2b5ff701fa1c54e49e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/171509
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31133}
This CL removes the redundant VAD output from the newly introduced
integer API in AudioProcessing.
Bug: webrtc:5298
Change-Id: Iad2b1b97ada7f4863139655526c110e326c6788a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170824
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30832}
This CL replaces all remaining usage of AudioFrame within APM,
with the exception of the AudioProcessing interface.
The main changes are within the unittests.
Bug: webrtc:5298
Change-Id: I219cdd08f81a8679b28d9dd1359a56837945f3d4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170362
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30831}
This is a reland of f3aa6326b8
Original change's description:
> Replace the ExperimentalAgc config with the new config format
>
> This CL replaces the use of the ExperimentalAgc config with
> using the new config format.
>
> Beyond that, some further changes were made to how the analog
> and digital AGCs are initialized/called. While these can be
> made in a separate CL, I believe the code changes becomes more
> clear by bundling those with the replacement of the
> ExperimentalAgc config.
>
> TBR: saza@webrtc.org
> Bug: webrtc:5298
> Change-Id: Ia19940f3abae048541e6716d0184b4caafc7d53e
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163986
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30149}
Bug: webrtc:5298
Change-Id: I6db03628ed3fa2ecd36544fe9181dd8244d7e2df
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165760
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30295}
This CL was generated by running:
git ls-files | grep ".cc" | xargs perl -i -ne 'BEGIN {undef $/}; s/("[\s\n]*<<[\s\n]*")/" "/g; print;'; git cl format
After that I manually edited modules/audio_processing/gain_controller2.cc to preserve its original
formatting.
This primary benefit of this change is a small reduction in binary size.
Bug: None
Change-Id: I689fa7ba9c717c314bb167e5d592c3c4e0871e29
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165961
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Jonas Olsson <jonasolsson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30251}
This reverts commit f3aa6326b8.
Reason for revert: Breaks downstream project.
Original change's description:
> Replace the ExperimentalAgc config with the new config format
>
> This CL replaces the use of the ExperimentalAgc config with
> using the new config format.
>
> Beyond that, some further changes were made to how the analog
> and digital AGCs are initialized/called. While these can be
> made in a separate CL, I believe the code changes becomes more
> clear by bundling those with the replacement of the
> ExperimentalAgc config.
>
> TBR: saza@webrtc.org
> Bug: webrtc:5298
> Change-Id: Ia19940f3abae048541e6716d0184b4caafc7d53e
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163986
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30149}
TBR=saza@webrtc.org,peah@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:5298
Change-Id: I794d2ab4b8caa5330c5ad490ba604646a249a1c1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/164530
Reviewed-by: Yves Gerey <yvesg@google.com>
Commit-Queue: Yves Gerey <yvesg@google.com>
Cr-Commit-Position: refs/heads/master@{#30153}
This CL replaces the use of the ExperimentalAgc config with
using the new config format.
Beyond that, some further changes were made to how the analog
and digital AGCs are initialized/called. While these can be
made in a separate CL, I believe the code changes becomes more
clear by bundling those with the replacement of the
ExperimentalAgc config.
TBR: saza@webrtc.org
Bug: webrtc:5298
Change-Id: Ia19940f3abae048541e6716d0184b4caafc7d53e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163986
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30149}
The two functions have a lot of shared logic and locking. This CL consolidates that into a single function.
Bug: webrtc:111235
Change-Id: Ib1c32165dbf0e212c7d4b0753bcbb5ffd05eb6fe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163022
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30144}
This CL changes the GetStatistics call in the audio processing module
(APM) to not aquire the render or capture locks in APM, while still
being thread-safe.
This change eliminates the risk of thread-priority inversion due to the
GetStatistics call.
Apart from the above the CL:
-Corrects the GetStatistics to not be const (it was const even though it
aquired locks).
-Slightly changes the statistics reporting, so that the stats received
may be older than the most recent stats reported.
Bug: webrtc:11241
Change-Id: I00deb5507e004cbe6e4a19a8bad357491f86f4ab
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163982
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30131}
This CL moves the high-pass filter to run in the full-band domain
instead of the split-band domain.
Bug: webrtc:11193
Change-Id: Ie61f4a80afda11236ecbb1ad544bbd0350c7bbfd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161453
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30112}
This CL removes the deprecated legacy AEC code.
Note that this CL should not be landed before the M80 release has been cut.
Bug: webrtc:11165
Change-Id: I59ee94526e62f702bb9fa9fa2d38c4e48f44753c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161238
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30036}
This CL follows the "Rule of zero".
Those constructors made no sense compared to default generated ones,
since all members are POD.
They were introduced to quiet a memory sanitizer warning,
which apparently was misleading.
As a bonus, the struct is now movable.
Bug: webrtc:11180, webrtc:9855
Change-Id: Iff9fd950bec8040bc6e7e7ece33cc49c5f453f5d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161381
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Yves Gerey <yvesg@google.com>
Cr-Commit-Position: refs/heads/master@{#30023}
The changes have been shown to be bitexact on a large dataset.
Bug: webrtc:10859
Change-Id: Iedc0e9e944ebfabb717dd7fb4d2682c695da883e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159694
Reviewed-by: Benjamin Wright <benwright@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Benjamin Wright <benwright@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29883}
This CL enables extracting the linear AEC output,
allowing for more straightforward
testing/development.
Bug: b/140823178
Change-Id: I14f7934008d87066b35500466cb6e6d96f811688
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153672
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29789}
This is a reland of 9dda1b3a48
Original change's description:
> Correct AEC3 multichannel functionality activation
>
> This CL corrects the AEC3 multichannel activation
> to also work for the case when a factory is used
> for the activation.
>
> Bug: webrtc:10913
> Change-Id: Ic2807d8bcef759261fde14447cff30633ba248dc
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158794
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29676}
Bug: webrtc:10913
Change-Id: I1cb3d0de61ea0b299158ca85433f2442c65c196f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158886
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29690}
This is a reland of 9dda1b3a48
Original change's description:
> Correct AEC3 multichannel functionality activation
>
> This CL corrects the AEC3 multichannel activation
> to also work for the case when a factory is used
> for the activation.
>
> Bug: webrtc:10913
> Change-Id: Ic2807d8bcef759261fde14447cff30633ba248dc
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158794
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29676}
Bug: webrtc:10913
Change-Id: Ibfe4e8a51183390a4054514bb294c89c2ea201e9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158880
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29685}
This reverts commit 9dda1b3a48.
Reason for revert: The CL is causing downstream issues
Original change's description:
> Correct AEC3 multichannel functionality activation
>
> This CL corrects the AEC3 multichannel activation
> to also work for the case when a factory is used
> for the activation.
>
> Bug: webrtc:10913
> Change-Id: Ic2807d8bcef759261fde14447cff30633ba248dc
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158794
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29676}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: Ic487f77f5c11485a0f25a2a1d3797d0ec956f913
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10913
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158797
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29678}
This CL corrects the AEC3 multichannel activation
to also work for the case when a factory is used
for the activation.
Bug: webrtc:10913
Change-Id: Ic2807d8bcef759261fde14447cff30633ba248dc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158794
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29676}
This is a reland of 87a7b82520
Original change's description:
> Refactoring of the noise suppressor and adding true multichannel support
>
> This CL adds proper multichannel support to the noise suppressor.
> To accomplish that in a safe way, a full refactoring of the noise
> suppressor code has been done.
>
> Due to floating point precision, the changes made are not entirely
> bitexact. They are, however, very close to being bitexact.
>
> As a safety measure, the former noise suppressor code is preserved
> and a kill-switch is added to allow revering to the legacy noise
> suppressor in case issues arise.
>
> Bug: webrtc:10895, b/143344262
> Change-Id: I0b071011b23265ac12e6d4b3956499d122286657
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158407
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29646}
Bug: webrtc:10895, b/143344262
Change-Id: I236f1e67bb0baa4e30908a4cf7a8a7bb55fbced3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158747
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29663}
This reverts commit 87a7b82520.
Reason for revert: Speculative revert. Breaks downstream projects.
Original change's description:
> Refactoring of the noise suppressor and adding true multichannel support
>
> This CL adds proper multichannel support to the noise suppressor.
> To accomplish that in a safe way, a full refactoring of the noise
> suppressor code has been done.
>
> Due to floating point precision, the changes made are not entirely
> bitexact. They are, however, very close to being bitexact.
>
> As a safety measure, the former noise suppressor code is preserved
> and a kill-switch is added to allow revering to the legacy noise
> suppressor in case issues arise.
>
> Bug: webrtc:10895, b/143344262
> Change-Id: I0b071011b23265ac12e6d4b3956499d122286657
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158407
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29646}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: I4d4025bda01f484979961fe57380a705e4d78397
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10895, b/143344262
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158701
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Commit-Queue: Artem Titov <titovartem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29651}
This CL adds proper multichannel support to the noise suppressor.
To accomplish that in a safe way, a full refactoring of the noise
suppressor code has been done.
Due to floating point precision, the changes made are not entirely
bitexact. They are, however, very close to being bitexact.
As a safety measure, the former noise suppressor code is preserved
and a kill-switch is added to allow revering to the legacy noise
suppressor in case issues arise.
Bug: webrtc:10895, b/143344262
Change-Id: I0b071011b23265ac12e6d4b3956499d122286657
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158407
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29646}
This change removes the deprecated ChannelLayout versions of ProcessStream
and AnalyzeReverseStream.
Bug: webrtc:5298
Change-Id: I8a7e33e89cffac5eceecd00dfd3c96000643f51b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158529
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29641}
This tests that both the ApplyConfig() and SetRuntimeSetting() route of
APM configuration correctly induce the pre-amplifier gain effect in APM.
Bug: webrtc:11045
Change-Id: Iddaa1c19487c6f68ed6eb1be6913ec2dfd284b04
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158083
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29607}
The new configuration path is via AudioProcessing::ApplyConfig and
AudioProcessing::GetStatistics.
Bug: webrtc:9878
Change-Id: Ic912d67455fcef4895566edb8fef62baf62d7cfe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/156440
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29454}
The new configuration path is via AudioProcessing::ApplyConfig and
AudioProcessing::GetStatistics.
ApmTest.Process passes with unchanged reference files if
audio_processing_impl would initialize the VAD with
VoiceDetection::kLowLikelihood instead of kVeryLowLikelihood.
This was verified by testing this CL with that modification.
Bug: webrtc:9878
Change-Id: I4d08df37a07e5c72feeec02a07d6b9435f917d72
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155445
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29395}
This is a reland of a66395e72f
Original change's description:
> Reland "Add core multi-channel pipeline in AEC3 This CL adds basic the basic pipeline to support multi-channel processing in AEC3."
>
> This is a reland of f3a197e553
>
> Original change's description:
> > Add core multi-channel pipeline in AEC3
> > This CL adds basic the basic pipeline to support multi-channel
> > processing in AEC3.
> >
> > Apart from that, it removes the 8 kHz processing support in several
> > places of the AEC3 code.
> >
> > Bug: webrtc:10913
> > Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> > Commit-Queue: Per Åhgren <peah@webrtc.org>
> > Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#29017}
>
> Bug: webrtc:10913
> Change-Id: Ifc4b13bd994cfd22dca8f8755fa5700617cc379d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151124
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29034}
Bug: webrtc:10913
Change-Id: Id8da5666df8c86f290c73ad5dc9958199f1a7ebe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151127
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29042}
This is a reland of f3a197e553
Original change's description:
> Add core multi-channel pipeline in AEC3
> This CL adds basic the basic pipeline to support multi-channel
> processing in AEC3.
>
> Apart from that, it removes the 8 kHz processing support in several
> places of the AEC3 code.
>
> Bug: webrtc:10913
> Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29017}
Bug: webrtc:10913
Change-Id: Ifc4b13bd994cfd22dca8f8755fa5700617cc379d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151124
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29034}
This reverts commit f3a197e553.
Reason for revert: Speculative revert, as this may'be broken some build bots
Original change's description:
> Add core multi-channel pipeline in AEC3
> This CL adds basic the basic pipeline to support multi-channel
> processing in AEC3.
>
> Apart from that, it removes the 8 kHz processing support in several
> places of the AEC3 code.
>
> Bug: webrtc:10913
> Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29017}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: I877d2993b9ccf024bd1d57bca1513c3e24d0bed3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10913
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150940
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29022}
This CL adds basic the basic pipeline to support multi-channel
processing in AEC3.
Apart from that, it removes the 8 kHz processing support in several
places of the AEC3 code.
Bug: webrtc:10913
Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29017}
This CL increases the maximum supported sample rate so that all rates
up to 384000 Hz are handled.
The CL also adds tests that verifies that APM works as intended for
different combinations of number of channels and sample rates.
Bug: webrtc:10882
Change-Id: I98738e33ac21413ae00fec10bb43b8796ae2078c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150532
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29014}
This CL removes and replaces the legacy fixed-point high-pass filter in
APM with the floating point high-pass filter in AEC3.
Bug: webrtc:10907
Change-Id: I88cf8f622ab139e4ffa97f89a72425aa3becfc58
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150103
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28950}
