Even if playout audio is only very briefly stereo, the AEC will enter stereo processing mode. To save CPU and improve AEC performance, this CL adds a hysteresis period before treating playout as stereo.
The feature is enabled by default in the AEC3 config.
Bug: chromium:1295710
Change-Id: I29116ab2e7823e25a02aa3b66a1c619f1d966d9e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/258479
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#36503}
If playout audio is temporarily stereo, the AEC will currently enter stereo processing mode indefinitely. To save CPU and improve AEC performance, this CL adds support for falling back to mono after a period of no stereo.
The feature is enabled by default in the AEC3 config.
Bug: chromium:1295710
Change-Id: I690b5b22f8407f950bf41f3bcaa9ca0138452157
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/258421
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#36502}
The features have two safety fallbacks:
- multichannel config has a killswitch WebRTC-Aec3SetupSpecificDefaultConfigDefaultsKillSwitch
- stereo detection has a killswitch WebRTC-Aec3StereoContentDetectionKillSwitch
Both features are enabled by default in the AEC3 config.
Tested: Bitexact on a large number of aecdumps.
Bug: chromium:1295710
Change-Id: I340cdc9140dacd4ca22d0911eb9f732b6cf8b226
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/258129
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/main@{#36482}
Currently the echo canceller reference signal is high-pass filtered to
avoid the need of modeling the capture-side high-pass filter as part of
the echo path.
This can lead to the lowest frequency bins of the linear filter
diverging as there is little low-frequency content available for
training. Over time the filter can output an increasing amount of
low-frequency power, which in turn affects the filter's ability to
adapt properly.
Disabling the high-pass filtering of the echo canceller reference solves
this issue, resulting in improved filter convergence.
Bug: webrtc:12265
Change-Id: Ic526a4b1b73e1808cfcd96a8cdee801b96a27671
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/208288
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33322}
This adds a config parameter for reverb modelling in nonlinear mode.
The killswitch is preserved, and will have the same effect before and after this CL.
Tested: Bitexact on a large number of aecdumps both with and without WebRTC-Aec3NonlinearModeReverbKillSwitch.
Bug: webrtc:8671
Change-Id: I7b2fa92307af5316dbe895392367abb8d15f06bf
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183541
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32298}
This CL renames the shadow filter in AEC3 to have the more accurate name
coarse filter.
The CL consists of 3 main initial patch sets, designed to simplify
the review:
1) Replaces "shadow" with "coarse" and adds a fall-back functionality
to support the old filter naming.
2) Renames the files according to the new naming.
3) Performs a "git cl format"
Bug: webrtc:8671
Change-Id: I28d6041d0d34e85f8f8048d004b44a1a5f07bb07
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170981
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30846}
This CL renames the main filter in AEC3 to have the more accurate name
refined filter.
The CL consists of 3 main initial patch sets, designed to simplify
the review:
1) Replaces "main" with "refined" and adds a fall-back functionality
to support the old filter naming.
2) Renames the files according to the new naming.
3) Performs a "git cl format"
Bug: webrtc:8671
Change-Id: Ifd0aab34e291736a2250e0986348404618630b1d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170825
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30843}
Implements an alternative to the dominant nearend detector.
Bug: b/130016532
Change-Id: If4867d58aad036ccf4e456ef81689b8db0284f7d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159865
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29906}
This reverts commit 8ee06a7b0c.
Reason for revert: ubsan triggers on config randomization
Original change's description:
> Increase coverage of AEC3 JSON config unit tests, fix bugs
>
> The new test checks that json strings are unchanged when parsing to a
> config and back to a string. This ensures that everything in the json
> representations is parsed when created a config from the json.
>
> This CL also adds the render_levels config substruct to the JSON parser.
>
> Some issues were surfaced by the new test:
> - Config validation clamping silently passed NaNs
> - Config validation only fixed the first out-of-bounds parameter, and
> not any subsequent ones
> - Config validation did not check all values in the config
>
> Bug: webrtc:9535
> Change-Id: Ie7b588731dc1fe26ba71d1eb2f177f3b3b8139e3
> Reviewed-on: https://webrtc-review.googlesource.com/c/107120
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25310}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: I12d4a6e35110241c51c13eff547ee5a640d141bc
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9535
Reviewed-on: https://webrtc-review.googlesource.com/c/107624
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25313}
The new test checks that json strings are unchanged when parsing to a
config and back to a string. This ensures that everything in the json
representations is parsed when created a config from the json.
This CL also adds the render_levels config substruct to the JSON parser.
Some issues were surfaced by the new test:
- Config validation clamping silently passed NaNs
- Config validation only fixed the first out-of-bounds parameter, and
not any subsequent ones
- Config validation did not check all values in the config
Bug: webrtc:9535
Change-Id: Ie7b588731dc1fe26ba71d1eb2f177f3b3b8139e3
Reviewed-on: https://webrtc-review.googlesource.com/c/107120
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25310}
