Any modification of the render stream now happens *before* the
echo detector enqueues render stream frames. In this way, there
is no impact of the render pre-processor on the echo likelihood
metric.
Bug: webrtc:9591
Change-Id: I9b5e339e892796a0d0cd072fdd45d35ec89d8802
Reviewed-on: https://webrtc-review.googlesource.com/93031
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24251}
This CL adds a flag to optionally disable the digital gain control in
ExperimentalAgc. With the flag, Experimental Agc (henceforth AGC1)
only controls the adaptive analog gain. This flag can be combined to
that which activates AGC2. That way, one can enable the hybrid AGC
configuration AGC1 analog only + AGC2 fixed+adaptive digital.
Previously, there was a flag "use_agc2_digital_adaptive" in
AgcManagerDirect. Our ambition was that to activate the hybrid mode
described above with this flag. The behavior of the flag was not
implemented.
To activate the hybrid mode after this CL, set
ExperimentalAgc::digital_adaptive_disabled=true and
AudioProcessing::Config::GainController2::enabled=true.
We also add flags for these settings in audioproc_f.
Then the required settings are currently
audioproc_f --agc2 1 --agc 1 --experimental_agc 1 \
--experimental_agc_disable_digital_adaptive 1 \
-i [INPUT]
Bug: webrtc:7494
Change-Id: Iea798dc3899cec83d30ba71caba787262fcaef41
Reviewed-on: https://webrtc-review.googlesource.com/89740
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24249}
Agc2 applies a digital gain to the nearend signal.
When the analog level changes, the digital gain calculation is no
longer valid. Therefore Agc2 should be notified to analog gain
changes.
This CL also allow audioproc_f to chain AGC1 and AGC2. In a dependent
CL we will allow using AGC1 for analog gain and AGC2 for digital
gain.
Bug: webrtc:7494
Change-Id: Id75b3728fbf2de1d84b7fba005e4670c7a2985d9
Reviewed-on: https://webrtc-review.googlesource.com/89387
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24231}
This reverts commit 771b50ca0b.
Reason for revert: Introduces error-prone config.
Original change's description:
> Add one-stop-shop for built-in AEC toggling in APM
>
> This does not change what AEC functionality is available.
> However, a client that only uses this interface - and not the submodule
> pointer accessors - gets simpler code, and is guaranteed not to run any
> two AECs in tandem.
>
> The submodule interface EchoControlMobile is being deprecated in
> https://webrtc-review.googlesource.com/c/src/+/89392
>
> Bug: webrtc:9535
> Change-Id: Id9326074e566be6d8768010fc421c457beff402c
> Reviewed-on: https://webrtc-review.googlesource.com/89386
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24066}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: I43283a1b22538a4caa77313499989146b2ce67f1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9535
Reviewed-on: https://webrtc-review.googlesource.com/90060
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24067}
This does not change what AEC functionality is available.
However, a client that only uses this interface - and not the submodule
pointer accessors - gets simpler code, and is guaranteed not to run any
two AECs in tandem.
The submodule interface EchoControlMobile is being deprecated in
https://webrtc-review.googlesource.com/c/src/+/89392
Bug: webrtc:9535
Change-Id: Id9326074e566be6d8768010fc421c457beff402c
Reviewed-on: https://webrtc-review.googlesource.com/89386
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24066}
This CL re-activates the explicit handling of microphone
gain changes in the AEC3 code. The implementation is done
beneath a kill-switch so that when that switch is active
the changes in this CL are bitexact.
Bug: webrtc:9526,chromium:863826
Change-Id: I58e93d8bc0bce7bec91e102de9891ad48ebc55d8
Reviewed-on: https://webrtc-review.googlesource.com/88620
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23986}
This CL adds two flags to audioproc_f. The flags control
AgcManagerDirect. The flags are
'--experimental_agc_agc2_level_estimator' and
'--experimental_agc_agc2_digital_adaptive'.
After this CL, the flags are be applied to AgcManagerDirect. The flags
have no effect in release-mode. They cause a crash in debug-mode.
In an upcoming CL, '--experimental_agc_agc2_level_estimator 1' will
replace the speech level estimation in ExperimentalAgc with that of
AGC2.
'--experimental_agc_agc2_digital_adaptive 1' will replace the digital
gain selection and application with that of AGC2.
These audioproc_f will activate both new settings:
./out/Target/audioproc_f --agc 1 --experimental_agc 1
--experimental_agc_agc2_digital_adaptive 1
--experimental_agc_agc2_level_estimator 1 --simulate_mic_gain 1
--simulated_mic_kind 2
See also https://webrtc-review.googlesource.com/c/src/+/79360
Bug: webrtc:7494
Change-Id: If0e65893dffdddb312e553787b8cedaf9a334323
Reviewed-on: https://webrtc-review.googlesource.com/86548
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23802}
This CL removes the remaining beamformer parts from the APM.
Bug: webrtc:9402
Change-Id: I9ab2795bd2813d17166ed0925125257b82d98a74
Reviewed-on: https://webrtc-review.googlesource.com/83340
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23694}
GainControlImpl was inited with two refs to the APM capture lock. As a
result, it could modify member vars without holding the render
lock. The Process and Analyze calls are not affected, because they are
made from audio_processing_impl when APM holds both locks.
Bug: webrtc:9354
Change-Id: I814b69602280921dda9dc45ffcbddb38de4a3394
Reviewed-on: https://webrtc-review.googlesource.com/84182
Reviewed-by: Max Morin <maxmorin@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23677}
This is a no-op change because rtc::Optional is an alias to absl::optional
This CL generated by running script with parameter 'modules/audio_processing'
find $@ -type f \( -name \*.h -o -name \*.cc \) \
-exec sed -i 's|rtc::Optional|absl::optional|g' {} \+ \
-exec sed -i 's|rtc::nullopt|absl::nullopt|g' {} \+ \
-exec sed -i 's|#include "api/optional.h"|#include "absl/types/optional.h"|' {} \+
find $@ -type f -name BUILD.gn \
-exec sed -r -i 's|"(../)*api:optional"|"//third_party/abseil-cpp/absl/types:optional"|' {} \+;
git cl format
Bug: webrtc:9078
Change-Id: Id29f8de59dba704787c2c38a3d05c60827c181b0
Reviewed-on: https://webrtc-review.googlesource.com/83982
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23653}
Removes the usage of an injected/enabled beamformer in APM, and marks
the API parts as deprecated.
Initialization and process calls are removed, and all enabled/disabled
flags are replaced by assuming no beamforming. Additionally, an AGC test
relying on the beamformer as a VAD is removed.
Bug: webrtc:9402
Change-Id: I0d3d0b9773da083ce43c28045db9a77278f59f95
Reviewed-on: https://webrtc-review.googlesource.com/83341
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23643}
The echo detector is currently stored as a unique_ptr, but when injecting an echo detector, a scoped_refptr makes more sense since the ownership will be shared.
Bug: webrtc:8732
Change-Id: I2180014acb84f1cd5c361864a444b7b6574520f5
Reviewed-on: https://webrtc-review.googlesource.com/83325
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23610}
Merges the two targets in modules/audio_processing
and removes some redundant code. This enables not writing
a bunch of redundant code in
https://webrtc-review.googlesource.com/c/src/+/70502
':audio_processing' did depend on ':aec_dump_interface'.
'modules/audio_processing/aec_dump' did depend on
'aec_dump_interface' but not ':audio_processing'.
Having the AecDump implementation not depending on
'audio_processing' allows to have faster compilation time and
reduces the dependencies. However, maintaining such a decoupling
makes APM and AecDump client code more complex.
NOTRY=true # want this in and 'ios_api_framework' seems stuck.
Bug: webrtc:7404
Change-Id: I75a5f234591014ac42d52bc1a36526072f5be89c
Reviewed-on: https://webrtc-review.googlesource.com/76603
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23244}
CustomProcessing is the interface to injectable audio processing
submodules to AudioProcessing. This CL makes it possible to set
runtime settings on the injected render processing component.
Note that the current runtime setting handling happens on the capture
thread. Therefore, we add another SwapQueue to communicate with the
render thread.
Bug: webrtc:9138, webrtc:9262
Change-Id: I665ce2d83a2b35ca8b25cca813d2cef7bd0ba911
Reviewed-on: https://webrtc-review.googlesource.com/76123
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23236}
- No need to have a unique ptr for the swap queue
- Remove default case from the switch in
AudioProcessingImpl::HandleRuntimeSettings()
Bug: webrtc:9138
Change-Id: I346ba1db6510b5caa637510298b67ead07197b81
Reviewed-on: https://webrtc-review.googlesource.com/71164
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22958}
- protobuf library
- file_wrapper.h
These appear to have been left behind during the AecDump refactoring.
After this CL, APM no longer depends on zlib by default! :)
Bug: webrtc:9139
Change-Id: I12a8df2a17a575515b9c07165825f0879c4e15eb
Reviewed-on: https://webrtc-review.googlesource.com/70762
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Fredrik Solenberg <solenberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22923}
This CL adds support for using any externally reported audio buffer
delay to set the initial alignment in AEC3 which is used before the
AEC has been able to detect the delay.
Bug: chromium:834182,webrtc:9163
Change-Id: Ic71355f69b7c4d5815b78e49987043441e7908fb
Reviewed-on: https://webrtc-review.googlesource.com/70580
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22917}
Since we always pass in the first audio channel, we should always pass 1 as the number of channels in the initialization function.
Bug: webrtc:8732
Change-Id: I978edb125d7cc701a5e07193256327908be00560
Reviewed-on: https://webrtc-review.googlesource.com/69660
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22885}
It's a module for applying a gain to the capture signal.
The gain is the first processing step in APM.
After this CL, these two features work:
* The PreAmplifier can be activated with
AudioProcessing::Config::pre_amplifier
* The PreApmlifier can be controlled after APM creation by
AudioProcessing::SetRuntimeSetting.
What's left is a change to AecDumps and to AecDump-replay.
NOTRY=True # 1-line change, tests just passed.
Bug: webrtc:9138
Change-Id: I85b3af511695b0a9cec2eed6fee7f05080305e1d
Reviewed-on: https://webrtc-review.googlesource.com/69811
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22881}
Add configuration fields for the pre-amplifier in the Audio Processing
Module. Also add flags and settings for the pre-amplifier in
audioproc_f.
Also make the setting stored in Aec Dumps. And make the setting
applied when playing back Aec Dumps in audioproc_f.
Bug: webrtc:9138
Change-Id: I4e59df200e1ebc56f06fae74ebf17d85858958a3
Reviewed-on: https://webrtc-review.googlesource.com/69560
Reviewed-by: Oleh Prypin <oprypin@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22876}
This CL includes the following changes:
- APM runtime setting (ID + float payload) and unit tests
- Swap queue of APM runtime settings used in AudioProcessingImpl
- runtime settings handler that forwards the settings to APM
sub-modules when a message is retrieved from the queue
- Unit test placeholder to check that the pre-gain update message
is correctly delivered
Bug: webrtc:9138
Change-Id: Id22704af15fde2b87a4431f5ce64ad1aeafc5280
Reviewed-on: https://webrtc-review.googlesource.com/69320
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22873}
- Directly include api/audio/audio_frame.h everywhere AudioFrame is used.
- This *will* remove transient dependencies on libjpeg and a bunch of other things from the e.g. APM.
- audio_frame.h still included from module_common_types.h for backwards compatibility with clients.
Bug: webrtc:9139, webrtc:7504
Change-Id: Id96f9268c01667fbcc29a01f5c1dd25a37836897
Reviewed-on: https://webrtc-review.googlesource.com/62464
Commit-Queue: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22845}
This moves it from an API directory (system_wrappers/include/) to a
non-API directory, which is exactly what we want for utilities like
this.
BUG=webrtc:8445
Change-Id: I440974da4d347b09ff042478720d7983056b62b9
Reviewed-on: https://webrtc-review.googlesource.com/21226
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22579}
Since the echo detector processes both the render and the capture audio streams, it needs to know the sample rates and number of channels of both.
Bug: webrtc:8732
Change-Id: Icd26e561d5dd98bd789a6dfa75f468f3fde06fee
Reviewed-on: https://webrtc-review.googlesource.com/61861
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22436}
This is a reland of 6f37ed78d9
CQ dry run OK except for missing iOS swarming bots.
NOTRY=True
Original change's description:
> Deprecate the adaptive level controller
>
> Level control handled by default-on AGC.
>
> Bug: none
> Change-Id: I405daeceece12c896d41156b649fcfd556726f77
> Reviewed-on: https://webrtc-review.googlesource.com/59682
> Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
> Reviewed-by: Alex Loiko <aleloi@webrtc.org>
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#22305}
Bug: none
Change-Id: I0b9b8e2f3457d5efd4603efbfbbc6b84651df315
Reviewed-on: https://webrtc-review.googlesource.com/60720
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22352}
This provides the empty shell of an AudioGenerator class.
It is intended to be used for debugging purposes and can be inserted
into the APM much like an AecDump. It allows for playing out diagnostic
audio unaffected by codecs and network jitter, while still capturing
API interaction like in a normal call.
NOTRY=True
Bug: webrtc:8882
Change-Id: I8132afc95cdba02ab233f44e22e0a5f530710ef7
Reviewed-on: https://webrtc-review.googlesource.com/53300
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22282}
The FixedGainController (FGC) applies a fixed gain. It will also
control the limiter. The limiter will be landed over the next several
CLs.
The GainController2 is a 'private submodule' of APM. It will control
the new automatic gain controller (AGC). It controls the AGC through
Initialize() and ApplyConfig().
This CL contains
* build changes to make modules/audio_processing/agc2 an independent
target
* a new MutableFloatAudioFrame which is the audio interface between
AGC2 and APM
* move of the fixed gain application from GainController2 to
FixedGainController.
If you are a googler, there is more information in this doc:
https://docs.google.com/document/d/1RV2Doet3MZtUPAHVva61Vjo20iyd1bmmm3aR8znWpzo/edit#
Bug: webrtc:7949
Change-Id: Ief95cbbce83c3aafe54638fd2ab881c9fb8bdc3a
Reviewed-on: https://webrtc-review.googlesource.com/50440
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22046}
The functions replace some existing code and will be used in the
the new AutomaticGainController.
Bug: webrtc:7949
Change-Id: I9a32132d4a4699a507b8548a2eac10972a2f3fd6
Reviewed-on: https://webrtc-review.googlesource.com/53141
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22045}
Due to the growing number of arguments, these functions are being replaced by the AudioProcessingBuilder class.
Bug: webrtc:8668
Change-Id: Ic3936fbd47d92eac22a857a678dca5fd8c029d8b
Reviewed-on: https://webrtc-review.googlesource.com/46241
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21826}
This adds a generic interface for an echo detector, and makes it possible to inject one into the audio processing module.
Bug: webrtc:8732
Change-Id: I30d97aeb829307b2ae9c4dbeb9a3e15ab7ec0912
Reviewed-on: https://webrtc-review.googlesource.com/38900
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21588}
As the number of injectable components of the APM increases, it is become increasingly unwieldy to keep expanding the Create function with more parameters. This builder class should make it easier to inject more components in the future.
Bug: webrtc:8668
Change-Id: If91547527760486c2a4daa9696bee22ec1d7675e
Reviewed-on: https://webrtc-review.googlesource.com/34651
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21425}
This CL adds a way to insert a custom render-side pre-processor to
APM. The pre-processor operates in full-band mode before anything
else. Currently the render processing chain is (if everything is
enabled):
Network --> [Pre processing] --> [Band split] -->
[IntelligibilityEnhancer] --> [Echo canceller (read-only)] -->
[Band merge] --> Playout
Since the render pre processor and capture post processor have the
same interface, I renamed webrtc::PostProcessing into
webrtc::CustomProcessing.
The old APM factory method PostProcessing will be deprecated and
dependencies updated as part of webrtc:8665
NOTRY=True
Bug: webrtc:8665
Change-Id: Ia381cbf12e336d6587406a14d77243d931f69a31
Reviewed-on: https://webrtc-review.googlesource.com/29201
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21327}
The new interface uses optionals instead of default values, and only values that are actually used are included. To make it easy to add/remove stats in the future, the struct itself is copied around on all layers, instead of copying the values one by one. This CL also fixes a bug which caused several APM statistics to get stuck at a fixed level when there are no more receive streams (after some period where there were receive streams). Since APM doesn't know this happens, an argument was added to the GetStats call to pass this information down to APM.
Bug: webrtc:8563, b/67926135
Change-Id: I96cc008353355bb520c4523f5c5379860f73ee24
Reviewed-on: https://webrtc-review.googlesource.com/25621
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20877}
The audio processing module reports the metrics 'echo return loss'
and 'echo return loss enhancement' for AEC3 via the old, soon to be
replaced, GetStatistics fuction.
Bug: webrtc:8533
Change-Id: I6b2286b5cdf8f20ebf14f82f1180f6bfb6c00c68
Reviewed-on: https://webrtc-review.googlesource.com/25642
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20869}
The audio processing module reports the metrics 'echo return loss'
and 'echo return loss enhancement' for AEC3.
Bug: webrtc:8533
Change-Id: I166c504adf013d6cb5d6d3c9717d0622c3454bb7
Reviewed-on: https://webrtc-review.googlesource.com/24880
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20835}
This new parallel GetStatistics function uses Optionals to indicate if stats are valid or not, and no longer relies on default values. It also takes an argument to indicate if receive streams are present, and if not several stats will not be set.
Bug: b/67926135
Change-Id: I175de1c65c414bea6ec9ca8b0b16f07cb2308d9f
Reviewed-on: https://webrtc-review.googlesource.com/17942
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20789}
The struct containing the config for AEC3 is removed from
AudioProcessing::Config and is put in a new struct called
EchoCanceller3Config.
AEC3 should no longer be activated through
AudioProcessing::ApplyConfig. Instead an EchoCanceller3Factory
can be injected at AudioProcessing creation.
Bug: webrtc:8346
Change-Id: I27e3592e675eec3632a60c45d9e0d12514c2c567
Reviewed-on: https://webrtc-review.googlesource.com/11420
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20342}
Echo Control is enabled in capture_nonlocked_ when injected.
Renamed echo_canceller3_enabled to echo_controller_enabled.
Bug: webrtc:8346
Change-Id: Icf441f07ce64719358841544da7579feeb7cfdbb
Reviewed-on: https://webrtc-review.googlesource.com/10808
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20311}
Added EchoCanceller3Factory that implements EchoControlFactory and can
be used for injecting EchoCanceller3 into Audio Processing Module.
Renamed InitializeEchoCanceller3 to InitializeEchoController.
Bug: webrtc:8346
Change-Id: I47078da6a49aca1ee41f6a9d5b7b8e91bb5c11a3
Reviewed-on: https://webrtc-review.googlesource.com/9220
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20299}
In preparation of coming CLs that will add an AGC interface to make the
gain controller injectable.
This CL simplifies AGC2 (dummy sub-module of audioproc_f) since it only
implements the fixed digital mode with hard-clipping - i.e., no limiter
is used.
The AGC2 config now includes the fixed gain to apply and audioproc_f
has been adapted accordingly.
Finally, this CL slightly simplifies the AGC2 integration into APM.
This CL is a continuation of https://codereview.webrtc.org/2995043002/
Bug: webrtc:7494
Change-Id: I3d554ea4dc6208928352059feb14987edabf14c7
Reviewed-on: https://webrtc-review.googlesource.com/4661
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20278}
The factory for EchoControl is changed from an rtc::Callback1 to an
interface. This avoids using rtc::Callback1 outside of WebRTC.
This also makes the EchoControl factory more similar to other
factories in the code base.
Bug: webrtc:8345
Change-Id: Ie61b9416ed771f8c756326736d17e339eb768469
Reviewed-on: https://webrtc-review.googlesource.com/8900
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20272}
This CL enables a factory method creating acoustic echo cancellers
that inherit EchoControl to be injected into the audio processing
module. AudioProcessing will call the factory method to create an
instance of the EchoControl subclass when needed. In the event of
sample rate changes, AudioProcessing will recreate the object using
the factory method.
Bug: webrtc:8346
Change-Id: I0c508b4d4cdb35569864cefaa0e3aea2555cc9b9
Reviewed-on: https://webrtc-review.googlesource.com/7742
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20251}
Simple rename to reflect that any AEC implementing the EchoControl
interface could be used instead of EchoCanceller3.
Bug: webrtc:8346
Change-Id: Id9abdc15bf3e0b30197077b8c11e20891a7463b3
Reviewed-on: https://webrtc-review.googlesource.com/7611
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20203}
This is in preparation for deleting the include in rtc_base/refcount.h,
but that change has to wait for some downstream applications to
not rely in the indirect include.
Partial reland of "Make rtc_base/refcount.h self contained, not including refcountedobject.h."
This is a reland of b7239a9dc8
Original change's description:
> Make rtc_base/refcount.h self contained, not including refcountedobject.h.
>
> The refcount.h file doesn't depend on anything from
> refcountedobject.h. The motivation of this change to make it possible
> to add additional declarations to refcount.h, and include it from
> refcountedobject.h.
>
> Bug: webrtc:8270
> Change-Id: I24f6131f471e675570968d00065ff9b1f55e3373
> Reviewed-on: https://webrtc-review.googlesource.com/5760
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Commit-Queue: Niels Moller <nisse@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#20106}
Bug: webrtc:8270
Change-Id: I63a42712f6c1ec83823c629d1a954fd1a04d4a6c
Reviewed-on: https://webrtc-review.googlesource.com/7281
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20185}
This is a reland of b7239a9dc8
Original change's description:
> Make rtc_base/refcount.h self contained, not including refcountedobject.h.
>
> The refcount.h file doesn't depend on anything from
> refcountedobject.h. The motivation of this change to make it possible
> to add additional declarations to refcount.h, and include it from
> refcountedobject.h.
>
> Bug: webrtc:8270
> Change-Id: I24f6131f471e675570968d00065ff9b1f55e3373
> Reviewed-on: https://webrtc-review.googlesource.com/5760
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Commit-Queue: Niels Moller <nisse@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#20106}
Bug: webrtc:8270
Change-Id: I9738f6680ab52d0f43639a1a39175fdba5957681
Reviewed-on: https://webrtc-review.googlesource.com/5840
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20180}
This reverts commit b7239a9dc8.
Reason for revert: Broke chromium mac build, compilation failures on content/renderer/media/webrtc/webrtc_video_frame_adapter.h.
Original change's description:
> Make rtc_base/refcount.h self contained, not including refcountedobject.h.
>
> The refcount.h file doesn't depend on anything from
> refcountedobject.h. The motivation of this change to make it possible
> to add additional declarations to refcount.h, and include it from
> refcountedobject.h.
>
> Bug: webrtc:8270
> Change-Id: I24f6131f471e675570968d00065ff9b1f55e3373
> Reviewed-on: https://webrtc-review.googlesource.com/5760
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Commit-Queue: Niels Moller <nisse@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#20106}
TBR=kwiberg@webrtc.org,nisse@webrtc.org
Change-Id: I7334597cc8979ba9cfaff526967084349ef27f3c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:8270
Reviewed-on: https://webrtc-review.googlesource.com/5800
Reviewed-by: Niels Moller <nisse@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20107}
The refcount.h file doesn't depend on anything from
refcountedobject.h. The motivation of this change to make it possible
to add additional declarations to refcount.h, and include it from
refcountedobject.h.
Bug: webrtc:8270
Change-Id: I24f6131f471e675570968d00065ff9b1f55e3373
Reviewed-on: https://webrtc-review.googlesource.com/5760
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20106}
This CL adds an interface for a generic PostProcessing module that
is optionally added to the APM at construction time.
(Parenthetically this CL also adds a missing lock check to
InitializeGainController2.)
Bug: webrtc:8201
Change-Id: I7de64cf8d5335ecec450da8a961660906141d42a
Reviewed-on: https://webrtc-review.googlesource.com/1570
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19973}
In https://webrtc-review.googlesource.com/c/src/+/1560 we moved WebRTC
from src/webrtc to src/ (in order to preserve an healthy git history).
This CL takes care of fixing header guards, #include paths, etc...
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iea91618212bee0af16aa3f05071eab8f93706578
Reviewed-on: https://webrtc-review.googlesource.com/1561
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19846}
In order to eliminate the WebRTC Subtree mirror in Chromium,
WebRTC is moving the content of the src/webrtc directory up
to the src/ directory.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iac59c5b51b950f174119565bac87955a7994bc38
Reviewed-on: https://webrtc-review.googlesource.com/1560
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19845}
