The ERLE is used to estimate residual echo for echo suppression. The
ERLE is reduced during far-end offset to avoid echo leakage. When there
is a strong near-end present this can cause unnecessary transparency loss.
This change adds an ERLE estimation that does not compensate for onsets and
uses it for residual echo estimation when the suppressor considers the near-end to be dominant.
Bug: webrtc:12686
Change-Id: Ida78eeacf1f95c6e62403f86ba3f2ff055898a84
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/215323
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33786}
Currently the echo canceller reference signal is high-pass filtered to
avoid the need of modeling the capture-side high-pass filter as part of
the echo path.
This can lead to the lowest frequency bins of the linear filter
diverging as there is little low-frequency content available for
training. Over time the filter can output an increasing amount of
low-frequency power, which in turn affects the filter's ability to
adapt properly.
Disabling the high-pass filtering of the echo canceller reference solves
this issue, resulting in improved filter convergence.
Bug: webrtc:12265
Change-Id: Ic526a4b1b73e1808cfcd96a8cdee801b96a27671
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/208288
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33322}
After the refined filter has been determined to perform better than
the coarse filter, and the coefficients of the coarse filters are
overwritten by the ones from the refined filter, at least 100 ms have
to pass before the adaptation of the refined filter is allowed to speed
up due to good coarse filter performance.
This change solves the vicious circle described in webrtc:12265, where
the coarse and refined filters can diverge over time.
This feature can be disabled remotely via a kill-switch. When disabled
the AEC output is bit-exact to before the change.
Bug: webrtc:12265,chromium:1155477
Change-Id: Iacd6e325e987dd8a475bb3e8163fee714c65b20a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/196501
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32801}
Avoid excessive echo suppression in frequencies above 2 kHz when
there is a dominant nearend. Calls with clock drift will not be affected
by this change as they tend to have less accurate linear filters.
Bug: webrtc:11985
Change-Id: Iddc628da5e2ba572c1b47acd87dd3be35260dca1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/188580
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32533}
This is a reland of 2978abb88c
Original change's description:
> Reduce the amount of howling reduction in AEC3
>
> This CL backs off the howling protection functionality in AEC3.
> The effect is increased transparency in some cases. No negative effects
> have been identified in the hands-on testing.
>
>
> A kill-switch is added that can be used to turn off the functionality.
>
> Bug: b/150764764
> Change-Id: I604c569c76f911799556a60bc8fd2fb43bbfe196
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186082
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32258}
Bug: b/150764764,chromium:1134939
Change-Id: I5eea60b35e6d09003ec2fee3865513df8bdd5823
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186260
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32304}
This adds a config parameter for reverb modelling in nonlinear mode.
The killswitch is preserved, and will have the same effect before and after this CL.
Tested: Bitexact on a large number of aecdumps both with and without WebRTC-Aec3NonlinearModeReverbKillSwitch.
Bug: webrtc:8671
Change-Id: I7b2fa92307af5316dbe895392367abb8d15f06bf
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183541
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32298}
This reverts commit 18515e2793.
Reason for revert: Continuation of previous revert https://webrtc-review.googlesource.com/c/src/+/186304
Original change's description:
> Reland "Reduce the amount of howling reduction in AEC3"
>
> This is a reland of 2978abb88c
>
> Original change's description:
> > Reduce the amount of howling reduction in AEC3
> >
> > This CL backs off the howling protection functionality in AEC3.
> > The effect is increased transparency in some cases. No negative effects
> > have been identified in the hands-on testing.
> >
> >
> > A kill-switch is added that can be used to turn off the functionality.
> >
> > Bug: b/150764764
> > Change-Id: I604c569c76f911799556a60bc8fd2fb43bbfe196
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186082
> > Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> > Commit-Queue: Per Åhgren <peah@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#32258}
>
> Bug: b/150764764
> Change-Id: I277f24eb3288ad0307e7463bad9aea6436cfe879
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186263
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32274}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: I0596855e3bf910878aebcee90e03345d5db1105d
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: b/150764764
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186269
Reviewed-by: Andrey Logvin <landrey@webrtc.org>
Commit-Queue: Andrey Logvin <landrey@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32276}
This is a reland of 2978abb88c
Original change's description:
> Reduce the amount of howling reduction in AEC3
>
> This CL backs off the howling protection functionality in AEC3.
> The effect is increased transparency in some cases. No negative effects
> have been identified in the hands-on testing.
>
>
> A kill-switch is added that can be used to turn off the functionality.
>
> Bug: b/150764764
> Change-Id: I604c569c76f911799556a60bc8fd2fb43bbfe196
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186082
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32258}
Bug: b/150764764
Change-Id: I277f24eb3288ad0307e7463bad9aea6436cfe879
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186263
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32274}
This reverts commit 2978abb88c.
Reason for revert: Breaks ApmTest.Process.
After trying to enable AVX2, we increased the amount of error
we tolerate (kFloatNear) and this CL introduced a regression which
makes the test fail after we reverted the enabling of AVX2 (restoring
the old tolerance).
With this CL:
../../modules/audio_processing/audio_processing_unittest.cc:1779: Failure
The difference between test->rms_dbfs_average() and rms_dbfs_average is 0.00142669677734375, which exceeds kFloatNear, where
test->rms_dbfs_average() evaluates to 52.907142639160156,
rms_dbfs_average evaluates to 52.905715942382812, and
kFloatNear evaluates to 0.00050000000000000001.
[ FAILED ] ApmTest.Process (5347 ms)
[----------] 1 test from ApmTest (5348 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test suite ran. (5350 ms total)
[ PASSED ] 0 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] ApmTest.Process
After reverting it:
[ OK ] ApmTest.Process (5345 ms)
[----------] 1 test from ApmTest (5347 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test suite ran. (5350 ms total)
[ PASSED ] 1 test.
Original change's description:
> Reduce the amount of howling reduction in AEC3
>
> This CL backs off the howling protection functionality in AEC3.
> The effect is increased transparency in some cases. No negative effects
> have been identified in the hands-on testing.
>
>
> A kill-switch is added that can be used to turn off the functionality.
>
> Bug: b/150764764
> Change-Id: I604c569c76f911799556a60bc8fd2fb43bbfe196
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186082
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32258}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: I4723c5cd66e3046851089157ec586afab55c5ce8
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: b/150764764
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186122
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32261}
This CL backs off the howling protection functionality in AEC3.
The effect is increased transparency in some cases. No negative effects
have been identified in the hands-on testing.
A kill-switch is added that can be used to turn off the functionality.
Bug: b/150764764
Change-Id: I604c569c76f911799556a60bc8fd2fb43bbfe196
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186082
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32258}
This CL renames the shadow filter in AEC3 to have the more accurate name
coarse filter.
The CL consists of 3 main initial patch sets, designed to simplify
the review:
1) Replaces "shadow" with "coarse" and adds a fall-back functionality
to support the old filter naming.
2) Renames the files according to the new naming.
3) Performs a "git cl format"
Bug: webrtc:8671
Change-Id: I28d6041d0d34e85f8f8048d004b44a1a5f07bb07
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170981
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30846}
This CL renames the main filter in AEC3 to have the more accurate name
refined filter.
The CL consists of 3 main initial patch sets, designed to simplify
the review:
1) Replaces "main" with "refined" and adds a fall-back functionality
to support the old filter naming.
2) Renames the files according to the new naming.
3) Performs a "git cl format"
Bug: webrtc:8671
Change-Id: Ifd0aab34e291736a2250e0986348404618630b1d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170825
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30843}
It should fix compilation errors that happen on some iOS bots saying
"definition of implicit copy assignment operator for 'Foo'
is deprecated because it has a user-declared copy constructor"
Bug: webrtc:11162
Change-Id: Ife3d1a800ed6a4cd08bdfd156cd0e320504ee8dd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161221
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Commit-Queue: Artem Titov <titovartem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29984}
This CL adds code for doing signal-dependent downmixing
before the delay estimation in the multichannel case.
As part of the CL, the unittests of the render delay
controller are corrected. However, as that caused some of
them to fail, the CL (for now) as well disables the failing
test.
Bug: webrtc:11153,chromium:1029740, webrtc:11161
Change-Id: I0b765c28fa5e547aabd6dfbd24b626ff9a16346f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161045
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29980}
This CL changes the downmixing of the input to the delay estimation
for surround/stereo signals to be off by default.
A kill-switch is also added for enforcing the downmix to be on.
Bug: webrtc:10913
Change-Id: I1030fef593ba56416deeb13b80d2f3812bffb9ed
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161012
Commit-Queue: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29951}
Implements an alternative to the dominant nearend detector.
Bug: b/130016532
Change-Id: If4867d58aad036ccf4e456ef81689b8db0284f7d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159865
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29906}
This CL enables extracting the linear AEC output,
allowing for more straightforward
testing/development.
Bug: b/140823178
Change-Id: I14f7934008d87066b35500466cb6e6d96f811688
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153672
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29789}
This CL adds support for multiple channels in the reverb
modelling. As a side effect, it also partly adds multi-channel
supports for the sections of the code.
Beyond adding the multi-channel support, a bug is fixed as part of
this CL. Since the bug fix affects the bitexactness, as a safety
precaution the CL includes the ability to override the bugfix.
Apart from the contributions from the bugfix, the changes have
been verified to be bitexact for a large set of mono recordings.
Bug: webrtc:10913
Change-Id: I1f307b532be85ef4182f8db41384f44d40a25219
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/156382
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29456}
Multichannel signals are downmixed to mono before decimation and
delay estimation. This is useful when not all channels play
audio content. The feature can be toggled in the AEC3 configuration.
Bug: webrtc:10913
Change-Id: I7d40edf7732bb51fec69e7f3ca063d821c5069c4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151762
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29126}
This CL removes a long unused fallback behavior for the reverb
computation.
Bug: webrtc:8671
Change-Id: I4b57795a9bb33769237858f40392881ee235653e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/148520
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28802}
The configuration parameter filter.use_linear_filter can be used to
disable the linear filtering. Disabling the linear filter is equivalent
to runing in non-linear mode.
Bug: b/130016532
Change-Id: I8ffdf474822888b9915444bba6cc1c25ec1efe5a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132552
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27566}
This change makes it possible to disable AEC3's render delay
controller and delay estimator, and instead rely on an external
delay estimator. The delay is communicated via SetAudioBufferDelay.
When the feature is enabled, no echo removal will be performed
until the first delay is provided.
The delay is
Bug: b/130016532
Change-Id: I16643109d78d770ff1d2713cf247b0b9cce1bc1c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131327
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27467}
This change removes the following unused parameters from the AEC3
configuration:
- render_pre_window_size_init
- render_post_window_size_init
- nonlinear_hold
- nonlinear_release
Bug: webrtc:8671
Change-Id: I8f7a3d350387cd8ada4d507c3a9fab43b7813f5c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131321
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27450}
This CL removes parameters for AEC3 which are no longer used. To reflect
that change, one of the parameters also is renamed
Bug: chromium:941949,webrtc:8671
Change-Id: I26609b396fa14ecb7523eebfe531a1338718103b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/127780
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27128}
This change reduces the risk of echo due to noise in the headroom
of the linear filter.
Changes:
- Use shorter delay headroom
- Delay headroom is specified in samples (not blocks)
- No hysteresis limit when delay is reduced
Bug: chromium:119942,webrtc:10341
Change-Id: I708e80e26d541dff8ca04b6da2d346a1d59cbfcb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126420
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27126}
This CL removes the legacy, no longer used, render buffering code. It
also removes four unused parameters from the AEC3 config. The change
is tested for bit-exactness.
Bug: webrtc:8671
Change-Id: I2bb6cb7a1097863f228767d757d551c00593bb00
Reviewed-on: https://webrtc-review.googlesource.com/c/119701
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26399}
Correcting a mistake in the dominant nearend detection where
the meaning of the echo-to-nearend ratio was inversed.
Bug: webrtc:8671
Change-Id: I7f56369fad1784e256150c312b6b3dafcb9d0f71
Reviewed-on: https://webrtc-review.googlesource.com/c/112136
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25818}
In this CL a more precise estimation of the Erle is introduced. This is done by creating different estimators that are specialized in different regions of the linear filter. An estimation of which regions were used for generating the current echo estimate is performed and used for selecting the right Erle estimator.
Bug: webrtc:9961
Change-Id: Iba6eb24596c067c3c66d40df590be379d3e1bb7b
Reviewed-on: https://webrtc-review.googlesource.com/c/109400
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25707}
This CL utilizes the existing, but unused, ability to set
different histogram thresholds for early and late delay
estimation. It does so by tuning the parameters for these.
On top of that, some corrections are added to correctly
handle resets and the use of the hysteresis thresholds.
Bug: webrtc:19886,chromium:896334
Change-Id: I950ac107c124541af8f02b4403f477dda71cc1a1
Reviewed-on: https://webrtc-review.googlesource.com/c/106706
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25443}
This CL allows control over the dominant nearend functionality so that
it is not active during the initial phase, when estimates are less
certain.
Bug: webrtc:9906,chromium:898273
Change-Id: I5f61dac806ec3b1ebc1a3ec72f0a16d07a67f14a
Reviewed-on: https://webrtc-review.googlesource.com/c/107632
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25326}
Some issues were surfaced during testing:
- Config validation clamping silently passed NaNs
- Config validation only fixed the first out-of-bounds parameter, and
not any subsequent ones
- Config validation did not check all values in the config
- use_stationarity_properties_at_init is misspelled in JSON parsing
These changes are identical to those in this CL:
https://webrtc-review.googlesource.com/c/src/+/107120
Bug: webrtc:9535
Change-Id: I36c5e7c69ffdc2c0c24a9be86ccb1df59683c0fe
Reviewed-on: https://webrtc-review.googlesource.com/c/107640
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25318}
This reverts commit 8ee06a7b0c.
Reason for revert: ubsan triggers on config randomization
Original change's description:
> Increase coverage of AEC3 JSON config unit tests, fix bugs
>
> The new test checks that json strings are unchanged when parsing to a
> config and back to a string. This ensures that everything in the json
> representations is parsed when created a config from the json.
>
> This CL also adds the render_levels config substruct to the JSON parser.
>
> Some issues were surfaced by the new test:
> - Config validation clamping silently passed NaNs
> - Config validation only fixed the first out-of-bounds parameter, and
> not any subsequent ones
> - Config validation did not check all values in the config
>
> Bug: webrtc:9535
> Change-Id: Ie7b588731dc1fe26ba71d1eb2f177f3b3b8139e3
> Reviewed-on: https://webrtc-review.googlesource.com/c/107120
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25310}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: I12d4a6e35110241c51c13eff547ee5a640d141bc
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9535
Reviewed-on: https://webrtc-review.googlesource.com/c/107624
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25313}
The new test checks that json strings are unchanged when parsing to a
config and back to a string. This ensures that everything in the json
representations is parsed when created a config from the json.
This CL also adds the render_levels config substruct to the JSON parser.
Some issues were surfaced by the new test:
- Config validation clamping silently passed NaNs
- Config validation only fixed the first out-of-bounds parameter, and
not any subsequent ones
- Config validation did not check all values in the config
Bug: webrtc:9535
Change-Id: Ie7b588731dc1fe26ba71d1eb2f177f3b3b8139e3
Reviewed-on: https://webrtc-review.googlesource.com/c/107120
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25310}
This change makes the dominant nearend detection more accurate.
- The hangover is increased not leave nearend state between words.
- The SNR requirement is increased to not enter nearend state without
speech activity.
- An early exit mechanism has been added to leave nearend state quickly
when the echo is strong.
Bug: chromium:897701,webrtc:9897
Change-Id: I9e0f3e6ecb80eee1c0c917d4835f110555f74acf
Reviewed-on: https://webrtc-review.googlesource.com/c/107347
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25299}
This CL simplifies the buffering of render data. Instead of making assumptions
about the worst possible platform, it leverages recent improvements in
the delay estimator to quickly adapt when the conditions change.
Pros:
- No capture delay, delay is found ~200 ms faster.
- Cleaner code that makes the concept of delay more clear.
- Allows for removal of one matched filter because of the jitter headroom
removal.
Cons:
- Delay estimator needs to re-adapt when the call jitter increases.
The code can be deactivated by a kill switch. When the kill switch is
pulled the CL is bit exact.
Bug: webrtc:9726,chromium:895338
Change-Id: Ie2f9c8c5ce5b5a4510b4bdb95db2b970b57cd5d0
Reviewed-on: https://webrtc-review.googlesource.com/c/96920
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25169}
In this CL the use of the stationarity properties at init is set to true by default.
Bug: webrtc:9865, chromium:894439
Change-Id: I716ce0d792a50616dc38cc0ba6f2c702549a81cc
Reviewed-on: https://webrtc-review.googlesource.com/c/105303
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25123}
"Perfection is achieved, not when there is nothing more to add,
but when there is nothing left to take away."
This CL removes the following kill-switches from AEC3
- WebRTC-Aec3DownSamplingFactor8KillSwitch
- WebRTC-Aec3NewSuppressionKillSwitch
- WebRTC-Aec3ShadowFilterJumpstartKillSwitch
- WebRTC-Aec3SlowFilterAdaptationKillSwitch
- WebRTC-Aec3SuppressorNearendAveragingKillSwitch
It also removes code paths and configuration parameters that are no
longer in use. The list of kill-switches in the audio processing
fuzzer test is updated.
The change has been tested for bit-exactness.
Bug: webrtc:8671
Change-Id: Ie0af86a14baf853548bf9c00b2b9b3bbc32c1aaa
Reviewed-on: https://webrtc-review.googlesource.com/c/105324
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25120}
This CL changes the tuning of the echo suppressor for the case when
there is echo only. The resulting effect is a slight increase of
transparency
Bug: webrtc:9844,chromium:893744
Change-Id: I5e6a867e0d03dc3a468a8f5cfa64103e001baae1
Reviewed-on: https://webrtc-review.googlesource.com/c/104760
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25075}
This CL utilizes the AEC3 ability to tailor the suppressor during
situations when the nearend dominates over the residual echo. This is
done by increasing the thresholds for transparent echo suppressor
behavior when the nearend is strong compared to the residual echo.
Bug: webrtc:9836, chromium:893744
Change-Id: Ic06569eefc7f2557b401db43b3ac84b299071294
Reviewed-on: https://webrtc-review.googlesource.com/c/104460
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25071}
