This CL refactors AGC2 and fixes the order with which the fixed
and the adaptive digital gain controllers are applied - i.e., fixed
first, then adaptive and finally limiter.
FixedGainController has been removed since we need to split the
processing done by the gain applier and the limiter.
Also, GainApplier and Limiter are easy enough to be used without
a wrapper and a wrapper would need 2 separated calls in the right
order - i.e., error prone.
FrameCombiner in audio mixer has been adapted and now only uses the
limiter (which is what is needed since no gain is applied).
The unit tests for FixedGainController have been moved to
gain_controller2_unittests. They have been re-adapted and
ChangeFixedGainShouldBeFastAndTimeInvariant has been re-tuned.
Bug: webrtc:7494
Change-Id: I4d7daeae917257ac019a645b74deba6642f77322
Reviewed-on: https://webrtc-review.googlesource.com/c/108624
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25477}
The extra saturation margin is a setting for the SaturationProtector
in GainController2. The higher it is, the less gain GC2 will apply. In
this CL we pipe the setting up to audio_processing.h. Now the setting
can be set at a high level.
Also in this CL add a few (missing, they should have been there
already) tests for the GC2 and GC2 with saturation margin.
Bug: webrtc:7494
Change-Id: I1b61f1662e6c6a8817fd5b0e845339694bf8d50d
Reviewed-on: https://webrtc-review.googlesource.com/c/109001
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25470}
Additionally, AudioProcessing::GetStatistics(bool) is made pure
virtual and the default implementation in AudioProcessing is removed.
Deprecation PSA:
https://groups.google.com/forum/#!msg/discuss-webrtc/NgqEPvkNuDE/7HtwnMmADgAJ
Bug: webrtc:9947, webrtc:8572
Change-Id: I123402bf7d6c49f3613154c469b818109d8fad43
Reviewed-on: https://webrtc-review.googlesource.com/c/108783
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25463}
This drops the locks and annotations in EchoCancellationImpl,
now that the interface is no longer externally accessible.
Bug: webrtc:9929
Change-Id: I401256f523340cbabce23a5914ab28ce44179935
Reviewed-on: https://webrtc-review.googlesource.com/c/108602
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25460}
This CL utilizes the existing, but unused, ability to set
different histogram thresholds for early and late delay
estimation. It does so by tuning the parameters for these.
On top of that, some corrections are added to correctly
handle resets and the use of the hysteresis thresholds.
Bug: webrtc:19886,chromium:896334
Change-Id: I950ac107c124541af8f02b4403f477dda71cc1a1
Reviewed-on: https://webrtc-review.googlesource.com/c/106706
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25443}
This CL creates a new API for the parser of APM json config that
that provides an explicit way for the user to know when there has
been an issue in the parsing of the json config data.
Bug: webrtc:9921
Change-Id: Idd8f40529f40ab6871efb5b356c0fd2cea21b7d9
Reviewed-on: https://webrtc-review.googlesource.com/c/107841
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25355}
This CL modifies the internal data logging and the audioproc_f tool
to allow controlling that via the command line, rather than solely via a
build flag. The logging of internal data is by default off.
Bug: webrtc:5298
Change-Id: I96d1b4f990582938527b9039d6c2ecbb6f76e9ca
Reviewed-on: https://webrtc-review.googlesource.com/c/107713
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25352}
This CL allows control over the dominant nearend functionality so that
it is not active during the initial phase, when estimates are less
certain.
Bug: webrtc:9906,chromium:898273
Change-Id: I5f61dac806ec3b1ebc1a3ec72f0a16d07a67f14a
Reviewed-on: https://webrtc-review.googlesource.com/c/107632
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25326}
Limiter has been renamed to LimiterDbGainCurve, which is a more correct name
and will allow in a follow-up CL to reuse the Limiter name for GainCurveApplier.
This is done to allow to use the limiter without instancing the fixed digital
gain controller and then to fix an AGC2 issue (namely, fixed gain applied after
the adaptive one).
Bug: webrtc:7494
Change-Id: Icd7050e3e51b832bfbf35e5cc61109215c5b1ca6
Reviewed-on: https://webrtc-review.googlesource.com/c/106901
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25322}
This CL is the result of running include-what-you-use tool on part
of the code base (audio target and dependencies) plus manual fixes.
bug: webrtc:8311
Change-Id: I277d281ce943c3ecc1bd45fd8d83055931743604
Reviewed-on: https://webrtc-review.googlesource.com/c/106280
Commit-Queue: Yves Gerey <yvesg@google.com>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25311}
This change makes the dominant nearend detection more accurate.
- The hangover is increased not leave nearend state between words.
- The SNR requirement is increased to not enter nearend state without
speech activity.
- An early exit mechanism has been added to leave nearend state quickly
when the echo is strong.
Bug: chromium:897701,webrtc:9897
Change-Id: I9e0f3e6ecb80eee1c0c917d4835f110555f74acf
Reviewed-on: https://webrtc-review.googlesource.com/c/107347
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25299}
In this CL we change the signal that controls the updates of the ERLE estimator. Until now, the render signal was used which is not optimum for reverberant signals. In this CL, a reverberation has been added to the the render signal and this new signal has been used for controlling when to update the ERLE estimator.
Bug: webrtc:9873
Change-Id: I0ebea3fc208f97aa237af015ba543015d49ed978
Reviewed-on: https://webrtc-review.googlesource.com/c/105660
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25285}
This is a reland of 5ccdc1331f
Original change's description:
> Prefix flag macros with WEBRTC_.
>
> Macros defined in rtc_base/flags.h are intended to be used to define
> flags in WebRTC's binaries (e.g. tests).
>
> They are currently not prefixed and this could cause problems with
> downstream clients since these names are quite common.
>
> This CL adds the 'WEBRTC_' prefix to them.
>
> Generated with:
>
> for x in DECLARE DEFINE; do
> for y in bool int float string FLAG; do
> git grep -l "\b$x\_$y\b" | \
> xargs sed -i "s/\b$x\_$y\b/WEBRTC_$x\_$y/g"
> done
> done
> git cl format
>
> Bug: webrtc:9884
> Change-Id: I7b524762b6a3e5aa5b2fc2395edd3e1a0fe72591
> Reviewed-on: https://webrtc-review.googlesource.com/c/106682
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25270}
TBR=kwiberg@webrtc.org
Bug: webrtc:9884
Change-Id: I5ba5368a231a334d135ed5e6fd7a279629ced8a3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://webrtc-review.googlesource.com/c/107161
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25277}
This reverts commit 5ccdc1331f.
Reason for revert: Breaks downstream project.
Original change's description:
> Prefix flag macros with WEBRTC_.
>
> Macros defined in rtc_base/flags.h are intended to be used to define
> flags in WebRTC's binaries (e.g. tests).
>
> They are currently not prefixed and this could cause problems with
> downstream clients since these names are quite common.
>
> This CL adds the 'WEBRTC_' prefix to them.
>
> Generated with:
>
> for x in DECLARE DEFINE; do
> for y in bool int float string FLAG; do
> git grep -l "\b$x\_$y\b" | \
> xargs sed -i "s/\b$x\_$y\b/WEBRTC_$x\_$y/g"
> done
> done
> git cl format
>
> Bug: webrtc:9884
> Change-Id: I7b524762b6a3e5aa5b2fc2395edd3e1a0fe72591
> Reviewed-on: https://webrtc-review.googlesource.com/c/106682
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25270}
TBR=mbonadei@webrtc.org,kwiberg@webrtc.org
Change-Id: Ia79cd6066ecfd1511c34f1b30fd423e560ed6854
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9884
Reviewed-on: https://webrtc-review.googlesource.com/c/107160
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25276}
Macros defined in rtc_base/flags.h are intended to be used to define
flags in WebRTC's binaries (e.g. tests).
They are currently not prefixed and this could cause problems with
downstream clients since these names are quite common.
This CL adds the 'WEBRTC_' prefix to them.
Generated with:
for x in DECLARE DEFINE; do
for y in bool int float string FLAG; do
git grep -l "\b$x\_$y\b" | \
xargs sed -i "s/\b$x\_$y\b/WEBRTC_$x\_$y/g"
done
done
git cl format
Bug: webrtc:9884
Change-Id: I7b524762b6a3e5aa5b2fc2395edd3e1a0fe72591
Reviewed-on: https://webrtc-review.googlesource.com/c/106682
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25270}
With this CL, the main and shadow filters are no longer fully reset to
0 as the delay changes. This allows for more robust echo removal for
some scenarios.
Bug: webrtc:9879,chromium:895838
Change-Id: I859aa3df3ae41648bc8efde01ec2e2a5cb392279
Reviewed-on: https://webrtc-review.googlesource.com/c/106345
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25251}
Removing code that has no audible effect.
Bug: webrtc:8671
Change-Id: Ibd7d0d19d760ae16b09285498c2ee09b42eb5968
Reviewed-on: https://webrtc-review.googlesource.com/c/106301
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25250}
This CL introduces two related changes
1) It changes the way that the AEC3 determines whether the linear
filter is sufficiently good for its output to be used. The new scheme
achieves this much earlier than what was done in the legacy scheme.
2) It changes the way that saturated echo is and handled so that the
impact of the nearend speech is lower.
Bug: webrtc:9835,webrtc:9843,chromium:895435,chromium:895431
Change-Id: I0b493676886e2134205e9992bbe4badac7e414cc
Reviewed-on: https://webrtc-review.googlesource.com/c/104380
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25208}
This CL simplifies the buffering of render data. Instead of making assumptions
about the worst possible platform, it leverages recent improvements in
the delay estimator to quickly adapt when the conditions change.
Pros:
- No capture delay, delay is found ~200 ms faster.
- Cleaner code that makes the concept of delay more clear.
- Allows for removal of one matched filter because of the jitter headroom
removal.
Cons:
- Delay estimator needs to re-adapt when the call jitter increases.
The code can be deactivated by a kill switch. When the kill switch is
pulled the CL is bit exact.
Bug: webrtc:9726,chromium:895338
Change-Id: Ie2f9c8c5ce5b5a4510b4bdb95db2b970b57cd5d0
Reviewed-on: https://webrtc-review.googlesource.com/c/96920
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25169}
In this CL the use of the stationarity properties at init is set to true by default.
Bug: webrtc:9865, chromium:894439
Change-Id: I716ce0d792a50616dc38cc0ba6f2c702549a81cc
Reviewed-on: https://webrtc-review.googlesource.com/c/105303
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25123}
This CL extend critical sections to incorporate:
* private_submodules_->echo_controller
* config_
As a side benefit, it prevents weird interleaving where configuration
could have been changed in the middle of GetStatistics methods.
Bug: webrtc:9841
Change-Id: I0de5e756a684c2ff1be4effccf8c0f3d3175e3b9
Reviewed-on: https://webrtc-review.googlesource.com/c/105142
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Yves Gerey <yvesg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25121}
"Perfection is achieved, not when there is nothing more to add,
but when there is nothing left to take away."
This CL removes the following kill-switches from AEC3
- WebRTC-Aec3DownSamplingFactor8KillSwitch
- WebRTC-Aec3NewSuppressionKillSwitch
- WebRTC-Aec3ShadowFilterJumpstartKillSwitch
- WebRTC-Aec3SlowFilterAdaptationKillSwitch
- WebRTC-Aec3SuppressorNearendAveragingKillSwitch
It also removes code paths and configuration parameters that are no
longer in use. The list of kill-switches in the audio processing
fuzzer test is updated.
The change has been tested for bit-exactness.
Bug: webrtc:8671
Change-Id: Ie0af86a14baf853548bf9c00b2b9b3bbc32c1aaa
Reviewed-on: https://webrtc-review.googlesource.com/c/105324
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25120}
This CL removes outdated code for testing of platforms with clock-drift
Bug: webrtc:8671
Change-Id: Ie202c514609d9f3d2357107b0daf895331275797
Reviewed-on: https://webrtc-review.googlesource.com/c/105183
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25105}
This CL ensures that the default setting for the usage of stationary signal
properties is not overridden by mistake.
Bug: chromium:894243
Change-Id: I85ab65383ee82b5f3153864da7a0cede7776c146
Reviewed-on: https://webrtc-review.googlesource.com/c/105181
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25104}
This CL changes the tuning of the echo suppressor for the case when
there is echo only. The resulting effect is a slight increase of
transparency
Bug: webrtc:9844,chromium:893744
Change-Id: I5e6a867e0d03dc3a468a8f5cfa64103e001baae1
Reviewed-on: https://webrtc-review.googlesource.com/c/104760
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25075}
This CL utilizes the AEC3 ability to tailor the suppressor during
situations when the nearend dominates over the residual echo. This is
done by increasing the thresholds for transparent echo suppressor
behavior when the nearend is strong compared to the residual echo.
Bug: webrtc:9836, chromium:893744
Change-Id: Ic06569eefc7f2557b401db43b3ac84b299071294
Reviewed-on: https://webrtc-review.googlesource.com/c/104460
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25071}
This is a new attempt to reduce the filter divergence
during double-talk without regressing in clock-drift
scenarios.
- The error_floor in decreased to allow for slow adaptation
when the filter performs well.
- The leakage_diverged is increased to allow for fast adaptation
when the shadow filter performs better.
- A new parameter, error_ceil, was added to stop the filter from
adapting too fast.
Bug: webrtc:9746,chromium:883264
Change-Id: Ie2868d2388b48412a192a004ec13f9eff34517b8
Reviewed-on: https://webrtc-review.googlesource.com/c/100460
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25063}
This CL lowers the default reverb decay to better match the standard
rooms where calls are made.
Bug: webrtc:9843
Change-Id: I46f1a629ecfdd72561829326d4fa58ede8107b6c
Reviewed-on: https://webrtc-review.googlesource.com/c/104740
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25061}
Original CL: https://webrtc-review.googlesource.com/c/src/+/101340
A (actually several weeks) while ago, we noticed an error with the
WebRTC.Audio.Agc2.EstimatedNoiseLevel histogram. It always reported
the value 0. Here is why:
The histogram bins go from 0 to 100. But the value logged is dBFS. It
is always less than or equal to 0. This CL changes inverts the value
logged. The noise level value should be somewhere between -90 and 0
dBFS.
The histogram description is updated in
https://chromium-review.googlesource.com/c/chromium/src/+/1264578
Bug: webrtc:7494
Change-Id: I0b53630d4284ce1078fd453e05e89ee53ca9f6c7
Reviewed-on: https://webrtc-review.googlesource.com/c/104063
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25021}
The AdaptiveAgc often boosts the signal outside of Float S16 range. It
is expected, which is why we have a limiter after it in the process
chain. But it turns out that this happens regularly even for simple
input examples. The output signal peaks can be as high as +4 dBFs for a
single speaker example (which should be easy). It leads to excessive
gain modulation by the limiter.
This CL is a new tuning designed to produce a safer gain. After this,
we shouldn't hit the saturation region of the limiter as often. But we
will still maintain a high gain.
We have a 'configurable kill-switch': the settings can be changed via
field trials WebRTC-Audio-Agc2Force(Initial|Extra)SaturationMargin.
Bug: webrtc:7494, chromium:892043
Change-Id: I5014377050c74c32ae8998282991141eae31cf58
Reviewed-on: https://webrtc-review.googlesource.com/c/102922
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25006}
This CL introduces a major refactoring of AecState for the purpose of
simplifying further improvements to the logic in this code.
The changes have successfully been tested for bitexactness.
Bug: webrtc:8671
Change-Id: If98efde55a22c76b093089a11a0562daac7e16e6
Reviewed-on: https://webrtc-review.googlesource.com/c/102362
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24996}
After the removal of field_trial_default, metrics_default and
runtime_enabled_features_default, this build target doesn't build
anything and can be safely removed.
Bug: webrtc:9631
Change-Id: Iee1111e065ffefe0b4b9a695ee67a594e6d82caa
Reviewed-on: https://webrtc-review.googlesource.com/c/103702
Reviewed-by: Oleh Prypin <oprypin@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24976}
This reverts commit 9e24dcff16.
Reason for revert: Breaks chromium.webrtc.fyi bots.
Original change's description:
> Export symbols needed by the Chromium component build (part 1).
>
> This CL uses RTC_EXPORT (defined in rtc_base/system/rtc_export.h)
> to mark WebRTC symbols as visible from a shared library, this doesn't
> mean these symbols are part of the public API (please continue to refer
> to [1] for info about what is considered public WebRTC API).
>
> [1] - https://webrtc.googlesource.com/src/+/HEAD/native-api.md
>
> Bug: webrtc:9419
> Change-Id: I802abd32874d42d3aa5ecd3c8022e7cf5e043d99
> Reviewed-on: https://webrtc-review.googlesource.com/c/103505
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Reviewed-by: Niels Moller <nisse@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24969}
TBR=mbonadei@webrtc.org,kwiberg@webrtc.org,nisse@webrtc.org
Change-Id: I01f6e18f0d2c0f0309cdaa6c943c3927e1f1f49f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9419
Reviewed-on: https://webrtc-review.googlesource.com/c/103720
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24974}
This CL uses RTC_EXPORT (defined in rtc_base/system/rtc_export.h)
to mark WebRTC symbols as visible from a shared library, this doesn't
mean these symbols are part of the public API (please continue to refer
to [1] for info about what is considered public WebRTC API).
[1] - https://webrtc.googlesource.com/src/+/HEAD/native-api.md
Bug: webrtc:9419
Change-Id: I802abd32874d42d3aa5ecd3c8022e7cf5e043d99
Reviewed-on: https://webrtc-review.googlesource.com/c/103505
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24969}
