CL partially auto-generated with:
git grep -l "\bassert(" | grep "\.[c|h]" | \
xargs sed -i 's/\bassert(/RTC_DCHECK(/g'
And with:
git grep -l "RTC_DCHECK(false)" | \
xargs sed -i 's/RTC_DCHECK(false)/RTC_NOTREACHED()/g'
With some manual changes to include "rtc_base/checks.h" where
needed.
A follow-up CL will remove assert() from Obj-C code as well
and remove the #include of <assert.h>.
The choice to replace with RTC_DCHECK is because assert()
is because RTC_DCHECK has similar behavior as assert()
based on NDEBUG.
This CL also contains manual changes to switch from
basic RTC_DCHECK to other (preferred) versions like
RTC_DCHECK_GT (and similar).
Bug: webrtc:6779
Change-Id: I00bed8886e03d685a2f42324e34aef2c9b7a63b0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/224846
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#34442}
If timestamp_scaler_ is used, then rtp_header.timestamp, passed to UpdateLastDecodedPacket, will advance at a different rate than the scaled timestamp packet->timestamp, passed to UpdateLastDecodedPacket.
NackTracker::EstimateTimestamp uses timestamp_last_received_rtp_, and NackTracker::TimeToPlay uses timestamp_last_decoded_rtp_.
This difference causes TimeToPlay to continuously increase to huge values, so that every missing packet will be returned from GetNackList, even if RTT > real time to play.
Change-Id: Ie6ca347972edea98a202c9cdd26c6ab3f45a73c4
Bug: None
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/222841
Reviewed-by: Jakob Ivarsson <jakobi@webrtc.org>
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#34361}
This is a change from the previous 100Hz frequency.
Also changing the locks slightly in AcmReceiver so that grabbing the
neteq lock right after we've let it go, isn't necessary inside of
AcmReceiver::GetAudio and also to avoid grabbing the neteq lock while
holding the AcmReceiver lock.
Bug: webrtc:12868
Change-Id: If6ee35f3dca20eb5bdbc615123aa099ccecf57c5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/221371
Commit-Queue: Tommi <tommi@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Markus Handell <handellm@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#34258}
Before this CL, timestamps of received packets were rounded
to the nearest millisecond and stored as int64_t. Due to the
rounding it sometimes happened that timestamps later in the
pipeline that are not rounded seem to occur even before the
video frame was received.
Change-Id: I92d8f3540b23baae2d4a1dc6a7cb3f58bcdaad18
Bug: webrtc:12722
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/216398
Reviewed-by: Chen Xing <chxg@google.com>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33916}
This is essentially replacing `new rtc::RefCountedObject` with
`rtc::make_ref_counted` in many files. In a couple of places I
made minor tweaks to make things compile such as adding parenthesis
when they were missing.
Bug: webrtc:12701
Change-Id: I3828dbf3ee0eb0232f3a47067474484ac2f4aed2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/215973
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Tommi <tommi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33852}
Many things are omitted in this doc and it can definitely be improved,
but I hope it captures the most important parts.
Bug: webrtc:12568
Change-Id: I13097d633ca19cecc9dd43bdb777b0ca48f151dd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/215142
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33724}
This is required to be able to update the Opus version and will be
rolled back after.
Bug: webrtc:12518
Change-Id: Icc649039787db44bd55a0dc8e5ba4089df3a9566
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209363
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33375}
Audio interruption metric is not implemented for codecs doing their own PLC.
R=ivoc@webrtc.org, jakobi@webrtc.org
Bug: b/177523033 webrtc:12456
Change-Id: I0aca6fa5c0ff617e76ee1e4ed8d95703c7097223
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/206561
Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
Reviewed-by: Christoffer Rodbro <crodbro@webrtc.org>
Reviewed-by: Jakob Ivarsson <jakobi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Pablo Barrera González <barrerap@google.com>
Cr-Commit-Position: refs/heads/master@{#33229}
Finding the array element with the largest argmax is a fairly common
operation, so it makes sense to have a Neon optimized version. The
implementation is done by first finding both the min and max value, and
then returning whichever has the largest argmax.
Bug: chromium:12355
Change-Id: I088bd4f7d469b2424a7265de10fffb42764567a1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/201622
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33052}
The abs max of a 16 bit integer cannot be represented as a 16 bit integer, because abs(-2^16) is too large. To work around this, we can instead use the index of the max element, convert it to a 32-bit int and then take the absolute value.
Bug: chromium:1158070, chromium:1146835, chromium:1161837
Change-Id: If56177c55ec62b4bd578986a5deae38a91bbc821
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/198123
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32950}
I was not able to reproduce chromium:1146676 locally, so the change in merge.cc is a speculative fix.
Bug: chromium:1146835, chromium:1146676, chromium:1137226
Change-Id: I14472ba5b41e58b2d5f27d9833249c14505af18f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/194264
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32759}
Instead of flushing all packets, it makes sense to flush down to the target level instead. This CL also initiates a flush when the packet buffer is a multiple of the target level, instead of waiting until it is completely full.
Bug: webrtc:12201
Change-Id: I8775147624536824eb88752f6e8ffe57ec6199cb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/193941
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32701}
Add a new field trial with more flexible parsing and new options:
- Resample packet delays to only update histogram with maximum observed
delay every X ms.
- Setting the maximum history size (in ms) used for calculating the
relative arrival delay.
Legacy field trial used for configuration is maintained.
Bug: webrtc:10333
Change-Id: I35b004f5d8209c85b33cb49def3816db51650946
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/192789
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32591}
The variables that are used to track the amount of preemptive expansion
and acceleration are not initialized before being passed to their
respective functions. However, these function can fail in certain cases,
and when they do the uninitialized memory will pollute the NetEq statistics.
Bug: chromium:1140376
Change-Id: I004fbaaf8d24de01dd1997fb73bdf93ca88ceaaf
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/191480
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32544}
Large gaps can cause issues in NetEq simulations, so the simulation is
ended whenever we encounter one. However, the time span of the gap is
still included in the simulation time, leading to incorrect results.
Bug: webrtc:10337
Change-Id: I94a1a0b46259e3718b1b73522a3886a17bedbb7d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/190287
Reviewed-by: Jakob Ivarsson <jakobi@webrtc.org>
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32514}
- Add buffer level filter and delay manager mocks and make them
injectable for easier testing.
- Add a basic set of tests for simple cases and recently added features.
Bug: webrtc:10333
Change-Id: I8b6f73b8ad99ad6859ed1279086c0bd68b7687be
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/188623
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32433}
This CL also puts the arguments in a struct to allow for easier future additions.
Bug: webrtc:11005
Change-Id: I47bf664e7106b724eb1fc42299c42bbf022393ef
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/188385
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32409}
This is a reland of 2a7c57c34f
Original change's description:
> Reland "Refactor NetEq delay manager logic."
>
> This is a reland of f8e62fcb14
>
> Original change's description:
> > Refactor NetEq delay manager logic.
> >
> > - Removes dependence on sequence number for calculating target delay.
> > - Changes target delay unit to milliseconds instead of number of
> > packets.
> > - Moves acceleration/preemptive expand thresholds to decision logic.
> > Tests for this will be added in a follow up cl.
> >
> > Bug: webrtc:10333
> > Change-Id: If690aae4abf41ef1d9353f0ff01fb7d121cf8a26
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186265
> > Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
> > Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#32326}
>
> Bug: webrtc:10333
> Change-Id: Iad5e7063f63b84762959ee5b412f5f14a7b2cd06
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186943
> Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
> Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32332}
Bug: webrtc:10333
Change-Id: If2244ee9a3d56a0cfa9b602e7bdf448dc6340147
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/187356
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32367}
This is a reland of f8e62fcb14
Original change's description:
> Refactor NetEq delay manager logic.
>
> - Removes dependence on sequence number for calculating target delay.
> - Changes target delay unit to milliseconds instead of number of
> packets.
> - Moves acceleration/preemptive expand thresholds to decision logic.
> Tests for this will be added in a follow up cl.
>
> Bug: webrtc:10333
> Change-Id: If690aae4abf41ef1d9353f0ff01fb7d121cf8a26
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186265
> Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
> Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32326}
Bug: webrtc:10333
Change-Id: Iad5e7063f63b84762959ee5b412f5f14a7b2cd06
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186943
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32332}
During muted state NetEq shortcircuits a large part of the internals to
quickly return a buffer filled with zeros. It can be beneficial for the
controller to be aware that it is in muted state.
Bug: webrtc:11005
Change-Id: I5fe24b4a3704d953cbd68b5a24bbb7ef58b30be0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186760
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32330}
This reverts commit f8e62fcb14.
Reason for revert: breaks downstream test.
Original change's description:
> Refactor NetEq delay manager logic.
>
> - Removes dependence on sequence number for calculating target delay.
> - Changes target delay unit to milliseconds instead of number of
> packets.
> - Moves acceleration/preemptive expand thresholds to decision logic.
> Tests for this will be added in a follow up cl.
>
> Bug: webrtc:10333
> Change-Id: If690aae4abf41ef1d9353f0ff01fb7d121cf8a26
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186265
> Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
> Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32326}
TBR=ivoc@webrtc.org,jakobi@webrtc.org
Change-Id: I1bdeacce61b902a0003a40c740f6acccf1443e3e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10333
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186942
Reviewed-by: Jakob Ivarsson <jakobi@webrtc.org>
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32329}
- Removes dependence on sequence number for calculating target delay.
- Changes target delay unit to milliseconds instead of number of
packets.
- Moves acceleration/preemptive expand thresholds to decision logic.
Tests for this will be added in a follow up cl.
Bug: webrtc:10333
Change-Id: If690aae4abf41ef1d9353f0ff01fb7d121cf8a26
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186265
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32326}
This change lets the fuzzer modify the first few bytes of the RTP
payload. One of the benefits is that it can cover the RED header
splitter functionality.
The CL also fixes an issue found while running the fuzzer locally.
Bug: webrtc:11640
Change-Id: I7ca73676440897a14a0aaca796f70d381e016575
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185819
Commit-Queue: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32242}
Add a get_and_clear_legacy_stats flag to AudioReceiveStream::GetStats,
to distinguish calls from standard GetStats and legacy GetStats.
Add const method NetEq::CurrentNetworkStatistics to get current
values of stateless NetEq stats. Standard GetStats will then call this
method instead of NetEq::NetworkStatistics.
Bug: webrtc:11622
Change-Id: I3833a246a9e39b18c99657a738da22c6e2bd5f5e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183600
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32092}
It is meant for Pinpoint to run only the relevant tests when running a bisection.
The Pinpoint side of this change can be found here:
https://crrev.com/c/2404161
Bug: webrtc:11084
Change-Id: I466f39816b83e2f83a3a49845c99605f4d5a857b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183763
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Jeremy Leconte <jleconte@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32082}
