Currently the echo canceller reference signal is high-pass filtered to
avoid the need of modeling the capture-side high-pass filter as part of
the echo path.
This can lead to the lowest frequency bins of the linear filter
diverging as there is little low-frequency content available for
training. Over time the filter can output an increasing amount of
low-frequency power, which in turn affects the filter's ability to
adapt properly.
Disabling the high-pass filtering of the echo canceller reference solves
this issue, resulting in improved filter convergence.
Bug: webrtc:12265
Change-Id: Ic526a4b1b73e1808cfcd96a8cdee801b96a27671
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/208288
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33322}
We need to be able build chromium with rtc_include_tests = true. It
reveals a lot of targets that are not compatible with chromium but
aren't marked so.
`rtc_include_tests=true` has been considered a way to disable targets for the Chromium build, causing an overload on rtc_include_tests while the meaning of the two GN args (rtc_include_tests and build_with_chromium) should be kept separated.
Bug: webrtc:12404
Change-Id: I2f72825445916eae7c20ef9338672d6a07a9b9ff
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/203890
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Andrey Logvin <landrey@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33124}
This change just affects the ERLE metric that is reported. The rest is unaffected and bitexact.
Bug: webrtc:12280
Change-Id: I2d28ef14a9b704c83aba18b624f67671eec4a042
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/196649
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32809}
Using `VectorMath::DotProduct()` in GatedRecurrentLayer to reuse existing
SIMD optimizations. Results:
- When SSE2/AVX2 is avilable, the GRU layer takes 40% of the unoptimized
code
- The realtime factor for the VAD improved as follows
- SSE2: from 570x to 630x
- AVX2: from 610x to 680x
This CL also improved the GRU layer benchmark by (i) benchmarking a GRU
layer havibng the same size of that used in the VAD and (ii) by prefetching
a long input sequence.
Bug: webrtc:10480
Change-Id: I9716b15661e4c6b81592b4cf7c172d90e41b5223
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/195545
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32803}
After the refined filter has been determined to perform better than
the coarse filter, and the coefficients of the coarse filters are
overwritten by the ones from the refined filter, at least 100 ms have
to pass before the adaptation of the refined filter is allowed to speed
up due to good coarse filter performance.
This change solves the vicious circle described in webrtc:12265, where
the coarse and refined filters can diverge over time.
This feature can be disabled remotely via a kill-switch. When disabled
the AEC output is bit-exact to before the change.
Bug: webrtc:12265,chromium:1155477
Change-Id: Iacd6e325e987dd8a475bb3e8163fee714c65b20a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/196501
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32801}
Avoid excessive echo suppression in frequencies above 2 kHz when
there is a dominant nearend. Calls with clock drift will not be affected
by this change as they tend to have less accurate linear filters.
Bug: webrtc:11985
Change-Id: Iddc628da5e2ba572c1b47acd87dd3be35260dca1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/188580
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32533}
This is a reland of ad148272b8
Original change's description:
> Activating AVX2 support by default
>
> This CL activates the newly added AVX2 support by default.
> The activation is done beneath a kill-switch.
>
> Beyond the above, the CL also changes an incorrect DCHECK_GT
> to a DCHECK_GE.
>
> Bug: webrtc:11663
> Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32193}
Bug: webrtc:11663, chromium:1134234
Change-Id: I0cb34cf08d4d14bc3aee055254493c9c9ee8faa0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186401
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32303}
This is a reland of ad148272b8
Original change's description:
> Activating AVX2 support by default
>
> This CL activates the newly added AVX2 support by default.
> The activation is done beneath a kill-switch.
>
> Beyond the above, the CL also changes an incorrect DCHECK_GT
> to a DCHECK_GE.
>
> Bug: webrtc:11663
> Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32193}
Bug: webrtc:11663
Change-Id: Ib41dc1d1c5865f2828699c462939d15d5562df47
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186262
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32270}
This reverts commit ad148272b8.
Reason for revert: Speculative revert to investigate test failures
Original change's description:
> Activating AVX2 support by default
>
> This CL activates the newly added AVX2 support by default.
> The activation is done beneath a kill-switch.
>
> Beyond the above, the CL also changes an incorrect DCHECK_GT
> to a DCHECK_GE.
>
> Bug: webrtc:11663
> Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32193}
TBR=mbonadei@webrtc.org,saza@webrtc.org,peah@webrtc.org,kwiberg@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:11663
Change-Id: Ibb019e8c702dce45ebf47f1c1e8db19069b4964d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186081
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32259}
This is a reland of ad148272b8
Original change's description:
> Activating AVX2 support by default
>
> This CL activates the newly added AVX2 support by default.
> The activation is done beneath a kill-switch.
>
> Beyond the above, the CL also changes an incorrect DCHECK_GT
> to a DCHECK_GE.
>
> Bug: webrtc:11663
> Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32193}
Bug: webrtc:11663
Change-Id: I669435c2f4e451ee0766d809443484f2dde09d8d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185482
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32200}
This reverts commit ad148272b8.
Reason for revert: Causing test failures downstream.
Original change's description:
> Activating AVX2 support by default
>
> This CL activates the newly added AVX2 support by default.
> The activation is done beneath a kill-switch.
>
> Beyond the above, the CL also changes an incorrect DCHECK_GT
> to a DCHECK_GE.
>
> Bug: webrtc:11663
> Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32193}
TBR=mbonadei@webrtc.org,saza@webrtc.org,peah@webrtc.org,kwiberg@webrtc.org
Change-Id: If2287a0a4b37931ce5f85baae093a66b19d0a78b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:11663
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185481
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32196}
This CL activates the newly added AVX2 support by default.
The activation is done beneath a kill-switch.
Beyond the above, the CL also changes an incorrect DCHECK_GT
to a DCHECK_GE.
Bug: webrtc:11663
Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32193}
Use speech content instead of white noise and enable target vs measured
bitrate tests.
Bug: webrtc:11360
Change-Id: If8c8e73f943eda14efeb22ba406c7a1bed7d32b4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/168660
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30630}
`gn format` recently [1] changed its formatting behavior
for deps, source, and a few other elements when they
are assigned (with =) single-element lists to be consistent
with the formatting of updates (with +=) with single-element.
Now that we've rolled in a GN binary with the change,
reformat all files so that people don't get presubmit
warnings due to this.
CL generated with:
$ git ls-files | grep BUILD.gn | xargs gn format
$ gn format build_overrides/build.gni
$ gn format build_overrides/gtest.gni
$ gn format modules/audio_coding/audio_coding.gni
$ gn format webrtc.gni
$ gn format .gn
Plus a few manual changes to add exceptions for
"public_deps" (after changing these lines the presubmit
started to complain).
[1] - https://gn-review.googlesource.com/c/gn/+/6860
Bug: webrtc:11302
Change-Id: Iac29d23c1618ebef925c972e2891cd9f4e8cd613
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166882
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30334}
This CL moves the high-pass filter to run in the full-band domain
instead of the split-band domain.
Bug: webrtc:11193
Change-Id: Ie61f4a80afda11236ecbb1ad544bbd0350c7bbfd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161453
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30112}
Beyond making the digital AGC1 code properly support
multichannel, this CL also
-Removes deprecated debug logging code.
-Converts the gain application to be fully in floating point
which
--Is less computationally complex.
--Does not quantize the samples to 16 bit before applying the
gains.
Bug: webrtc:10859
Change-Id: I6020ba8ae7e311dfc93a72783a2bb68d935f90c5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159861
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29886}
The changes have been shown to be bitexact on a large dataset.
Bug: webrtc:10859
Change-Id: Iedc0e9e944ebfabb717dd7fb4d2682c695da883e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159694
Reviewed-by: Benjamin Wright <benwright@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Benjamin Wright <benwright@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29883}
This is a reland of 87a7b82520
Original change's description:
> Refactoring of the noise suppressor and adding true multichannel support
>
> This CL adds proper multichannel support to the noise suppressor.
> To accomplish that in a safe way, a full refactoring of the noise
> suppressor code has been done.
>
> Due to floating point precision, the changes made are not entirely
> bitexact. They are, however, very close to being bitexact.
>
> As a safety measure, the former noise suppressor code is preserved
> and a kill-switch is added to allow revering to the legacy noise
> suppressor in case issues arise.
>
> Bug: webrtc:10895, b/143344262
> Change-Id: I0b071011b23265ac12e6d4b3956499d122286657
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158407
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29646}
Bug: webrtc:10895, b/143344262
Change-Id: I236f1e67bb0baa4e30908a4cf7a8a7bb55fbced3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158747
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29663}
This reverts commit 87a7b82520.
Reason for revert: Speculative revert. Breaks downstream projects.
Original change's description:
> Refactoring of the noise suppressor and adding true multichannel support
>
> This CL adds proper multichannel support to the noise suppressor.
> To accomplish that in a safe way, a full refactoring of the noise
> suppressor code has been done.
>
> Due to floating point precision, the changes made are not entirely
> bitexact. They are, however, very close to being bitexact.
>
> As a safety measure, the former noise suppressor code is preserved
> and a kill-switch is added to allow revering to the legacy noise
> suppressor in case issues arise.
>
> Bug: webrtc:10895, b/143344262
> Change-Id: I0b071011b23265ac12e6d4b3956499d122286657
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158407
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29646}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: I4d4025bda01f484979961fe57380a705e4d78397
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10895, b/143344262
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158701
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Commit-Queue: Artem Titov <titovartem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29651}
This CL adds proper multichannel support to the noise suppressor.
To accomplish that in a safe way, a full refactoring of the noise
suppressor code has been done.
Due to floating point precision, the changes made are not entirely
bitexact. They are, however, very close to being bitexact.
As a safety measure, the former noise suppressor code is preserved
and a kill-switch is added to allow revering to the legacy noise
suppressor in case issues arise.
Bug: webrtc:10895, b/143344262
Change-Id: I0b071011b23265ac12e6d4b3956499d122286657
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158407
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29646}
The new configuration path is via AudioProcessing::ApplyConfig and
AudioProcessing::GetStatistics.
ApmTest.Process passes with unchanged reference files if
audio_processing_impl would initialize the VAD with
VoiceDetection::kLowLikelihood instead of kVeryLowLikelihood.
This was verified by testing this CL with that modification.
Bug: webrtc:9878
Change-Id: I4d08df37a07e5c72feeec02a07d6b9435f917d72
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155445
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29395}
This CL removes and replaces the legacy fixed-point high-pass filter in
APM with the floating point high-pass filter in AEC3.
Bug: webrtc:10907
Change-Id: I88cf8f622ab139e4ffa97f89a72425aa3becfc58
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150103
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28950}
This is a reland of b7b8e30cb4
Original change's description:
> Reland Process 8 kHz audio as 16 kHz internally of the audio processing module
>
> This CL relands the code from the CL "Process 8 kHz audio as 16 kHz internally
> of the audio processing module" which by mistake was reverted via a rebase in
> another CL.
>
> The CL changes the behavior of APM for 8 kHz so that it is internally
> processed as 16 kHz.
>
> Bug: webrtc:10863
> Change-Id: I32a57b2d279c2134125667c19b09cfda381a33c3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150221
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28944}
Bug: webrtc:10863
Change-Id: Ic626b99b099248f0d8a677dc4cfe1505e14ae7cd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150330
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28949}
This reverts commit b7b8e30cb4.
Reason for revert: Broke ApmTest.Process test in internal iOS waterfall
Original change's description:
> Reland Process 8 kHz audio as 16 kHz internally of the audio processing module
>
> This CL relands the code from the CL "Process 8 kHz audio as 16 kHz internally
> of the audio processing module" which by mistake was reverted via a rebase in
> another CL.
>
> The CL changes the behavior of APM for 8 kHz so that it is internally
> processed as 16 kHz.
>
> Bug: webrtc:10863
> Change-Id: I32a57b2d279c2134125667c19b09cfda381a33c3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150221
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28944}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: Ia49e07b0c25c49da646917516e317f1d57cc4e84
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10863
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150326
Reviewed-by: Artem Titarenko <artit@webrtc.org>
Commit-Queue: Artem Titarenko <artit@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28948}
This CL relands the code from the CL "Process 8 kHz audio as 16 kHz internally
of the audio processing module" which by mistake was reverted via a rebase in
another CL.
The CL changes the behavior of APM for 8 kHz so that it is internally
processed as 16 kHz.
Bug: webrtc:10863
Change-Id: I32a57b2d279c2134125667c19b09cfda381a33c3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150221
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28944}
This is a reland of 81c0cf287c
Original change's description:
> Simplification and refactoring of the AudioBuffer code
>
> This CL performs a major refactoring and simplification
> of the AudioBuffer code that.
> -Removes 7 of the 9 internal buffers of the AudioBuffer.
> -Avoids the implicit copying required to keep the
> internal buffers in sync.
> -Removes all code relating to handling of fixed-point
> sample data in the AudioBuffer.
> -Changes the naming of the class methods to reflect
> that only floating point is handled.
> -Corrects some bugs in the code.
> -Extends the handling of internal downmixing to be
> more generic.
>
> Bug: webrtc:10882
> Change-Id: I12c8af156fbe366b154744a0a1b3d926bf7be572
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149828
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28928}
Bug: webrtc:10882
Change-Id: I2ddf327e80a03468c41662ae63c619ff34f2363a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150101
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28938}
This CL changes the behavior of APM for 8 kHz so that it is internally
processed as 16 kHz.
Bug: webrtc:10863
Change-Id: Ie17de6551c6e984b60534820374a49ca298f06ce
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/148800
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28929}
This CL removes all external access to the integer sample data in the
AudioBuffer class. It also removes the API in AudioBuffer that provides this.
The purpose of this is to pave the way for removing the sample
duplicating and implicit conversions between integer and floating point
sample formats which is done inside the AudioBuffer.
Bug: webrtc:10882
Change-Id: I1438b691bcef98278aef8e3c63624c367c2d12e9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149162
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28912}
- add test that checks that the computed VAD probability is within
tolerance *1
- speed-up some tests by reducing the input length and skipping frames
- remove unused code in test_utils
- fix some comments
*1: RnnVadTest::RnnBitExactness is replaced by
RnnVadTest::RnnVadProbabilityWithinTolerance
Bug: webrtc:10480
Change-Id: I19332d06eacffbbe671bf7749ff4c92798bdc55c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133910
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27803}
As non-linear mode uses a suppressed version of y (not e) as output, this change
uses Y2, rather than E2, as nearend spectrum when computing the suppression gains.
E2 is still used in linear mode.
This change also affects how the minimum suppression gains are calculated. The
minimum gain is now min_echo_power / weighted_residual_echo.
Bug: webrtc:10550
Change-Id: I2904c5a09dd64b06bf25eb5a37c18dab50297794
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133023
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27629}
This CL changes the APM unittests to use AEC3 instead of
AEC2.
Bug: webrtc:8671
Change-Id: I80f88dbafb7c31696abd8b7efb5a187a9fb30d1c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129420
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27607}
The difference to the original is new bitexactness strings. The
reason for reland is breaking downstream projects.
Original CL description:
Tests for multi-stream Opus.
This CL (mainly) adds bit-exactness tests for multi-stream Opus. The
tests are in audio_coding_unittest.cc. Some refactoring of
AcmSendTestOldApi, AcmSenderBitExactnessOldApi is done to make it
possible. A few checks for "channels \in {1, 2}" are replaced with
"channels \in {1, 2, 4, 6, 8}" in the WebRTC Opus codec wrapper. A few
other changes are made to be able to write and read multi-channel WAV
files.
The SDP changes are NOT included; as of this CL there is no way to set
up a multi-stream opus en/de-coder from SDP strings.
TBR=ossu@webrtc.org
Bug: webrtc:8649
Change-Id: I6261b18c69fd666d43ab34ed8f1bc9d5cc82b21f
Reviewed-on: https://webrtc-review.googlesource.com/c/123882
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26809}
This reverts commit 5341aaccdb.
Reason for revert: Order of initialization of global static strings.
Original change's description:
> Reland of https://webrtc-review.googlesource.com/c/src/+/114883
>
> The difference to the original is new bitexactness strings AND
> global static file string constants. The reason for reland is breaking
> downstream projects.
>
> Original CL description:
>
> Tests for multi-stream Opus.
>
> This CL (mainly) adds bit-exactness tests for multi-stream Opus. The
> tests are in audio_coding_unittest.cc. Some refactoring of
> AcmSendTestOldApi, AcmSenderBitExactnessOldApi is done to make it
> possible. A few checks for "channels \in {1, 2}" are replaced with
> "channels \in {1, 2, 4, 6, 8}" in the WebRTC Opus codec wrapper. A few
> other changes are made to be able to write and read multi-channel WAV
> files.
>
> The SDP changes are NOT included; as of this CL there is no way to set
> up a multi-stream opus en/de-coder from SDP strings.
>
> Bug: webrtc:8649
> Change-Id: I9fd47c790c241c1876c4a731b0840bec30b4f1b2
> Reviewed-on: https://webrtc-review.googlesource.com/c/123387
> Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
> Commit-Queue: Alex Loiko <aleloi@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#26774}
TBR=aleloi@webrtc.org,ossu@webrtc.org
Change-Id: I88060f2050ccee83d6091b042a10f79b3c4edc47
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:8649
Reviewed-on: https://webrtc-review.googlesource.com/c/123580
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26777}
The difference to the original is new bitexactness strings AND
global static file string constants. The reason for reland is breaking
downstream projects.
Original CL description:
Tests for multi-stream Opus.
This CL (mainly) adds bit-exactness tests for multi-stream Opus. The
tests are in audio_coding_unittest.cc. Some refactoring of
AcmSendTestOldApi, AcmSenderBitExactnessOldApi is done to make it
possible. A few checks for "channels \in {1, 2}" are replaced with
"channels \in {1, 2, 4, 6, 8}" in the WebRTC Opus codec wrapper. A few
other changes are made to be able to write and read multi-channel WAV
files.
The SDP changes are NOT included; as of this CL there is no way to set
up a multi-stream opus en/de-coder from SDP strings.
Bug: webrtc:8649
Change-Id: I9fd47c790c241c1876c4a731b0840bec30b4f1b2
Reviewed-on: https://webrtc-review.googlesource.com/c/123387
Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26774}
This reverts commit 9c31ac2323.
Reason for revert: Breaks downstream project.
Original change's description:
> Tests for multi-stream Opus.
>
> This CL (mainly) adds bit-exactness tests for multi-stream Opus. The
> tests are in audio_coding_unittest.cc. Some refactoring of
> AcmSendTestOldApi, AcmSenderBitExactnessOldApi is done to make it
> possible. A few checks for "channels \in {1, 2}" are replaced with
> "channels \in {1, 2, 4, 6, 8}" in the WebRTC Opus codec wrapper. A few
> other changes are made to be able to write and read multi-channel WAV
> files.
>
> The SDP changes are NOT included; as of this CL there is no way to set
> up a multi-stream opus en/de-coder from SDP strings.
>
> Bug: webrtc:8649
> Change-Id: I1d93a9b8eecc3f6e19896ff2e2ce9b63da77a23c
> Reviewed-on: https://webrtc-review.googlesource.com/c/114883
> Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
> Commit-Queue: Alex Loiko <aleloi@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#26742}
TBR=aleloi@webrtc.org,ossu@webrtc.org
Change-Id: I0ac48b7320d31d3e7af33bf8714c3db6c807b82e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:8649
Reviewed-on: https://webrtc-review.googlesource.com/c/123385
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26747}
This CL (mainly) adds bit-exactness tests for multi-stream Opus. The
tests are in audio_coding_unittest.cc. Some refactoring of
AcmSendTestOldApi, AcmSenderBitExactnessOldApi is done to make it
possible. A few checks for "channels \in {1, 2}" are replaced with
"channels \in {1, 2, 4, 6, 8}" in the WebRTC Opus codec wrapper. A few
other changes are made to be able to write and read multi-channel WAV
files.
The SDP changes are NOT included; as of this CL there is no way to set
up a multi-stream opus en/de-coder from SDP strings.
Bug: webrtc:8649
Change-Id: I1d93a9b8eecc3f6e19896ff2e2ce9b63da77a23c
Reviewed-on: https://webrtc-review.googlesource.com/c/114883
Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26742}
This is a reland of
https://webrtc-review.googlesource.com/c/src/+/111750.
This time we don't use the multistream decoder unless we have to.
(Which is when #channels >2). Pros: don't make downstream projects
crash due to used up stack space, a few % more efficiency for the
typical case (because multistream adds some overhead). Cons: Messy
C-code with "union" types and #define MACROs, probably more
maintenance.
Bug: webrtc:8649
Change-Id: I4253a5e0c382f67ac7c6731dc6602a31e6779e63
Reviewed-on: https://webrtc-review.googlesource.com/c/120049
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26445}
This reverts commit 83ed89a45f.
Reason for revert: breaks downstream project
Original change's description:
> Opus multistream.
>
> This is a backwards-compatible change. It makes WebRTC use the Opus
> multistream decoder for all Opus packets. Single-stream packets are a
> special case of multistream ones (with stream=1).
>
> The tricky parts are 'WebRtcOpus_GetMaxPlaybackRate' and
> 'WebRtcOpus_GetSurroundParameters'. GetMaxPlaybackRate is supposed to
> do what opus_encoder_ctl(encoder, OPUS_GET_MAX_BANDWIDTH(&bandwidth))
> did when we had single-stream encoders. Now there may be several
> independent encoders with possibly different BANDWIDTH. The new
> GetMaxPlaybackRate queries all of them, and returns a playback rate if
> all the encoder's rates are equal.
>
> WebRtcOpus_GetSurroundParameters is a configuration convention. It
> maps the number of channels to a multi-stream encoder/decoder
> configuration. As described in RFC 7845
> https://tools.ietf.org/html/rfc7845#section-5.1.1, a multi-stream
> encoder/decoder needs a number of streams, number of coupled streams
> and a 255-byte mapping array. The function GetSurroundParameters
> computes all of these from the number of channels. [1, 2, 4, 6, 8]
> channels are supported.
>
> Bug: webrtc:8649
> Change-Id: I271de8e387d738254d6aa53af7fcf8644a53edb5
> Reviewed-on: https://webrtc-review.googlesource.com/c/111750
> Commit-Queue: Alex Loiko <aleloi@webrtc.org>
> Reviewed-by: Minyue Li <minyue@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#26293}
TBR=aleloi@webrtc.org,minyue@webrtc.org
Change-Id: I1002e3273b44d3cccacdba84b8c363eefd537c4b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:8649
Reviewed-on: https://webrtc-review.googlesource.com/c/118201
Reviewed-by: Amit Hilbuch <amithi@webrtc.org>
Commit-Queue: Amit Hilbuch <amithi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26306}
This is a backwards-compatible change. It makes WebRTC use the Opus
multistream decoder for all Opus packets. Single-stream packets are a
special case of multistream ones (with stream=1).
The tricky parts are 'WebRtcOpus_GetMaxPlaybackRate' and
'WebRtcOpus_GetSurroundParameters'. GetMaxPlaybackRate is supposed to
do what opus_encoder_ctl(encoder, OPUS_GET_MAX_BANDWIDTH(&bandwidth))
did when we had single-stream encoders. Now there may be several
independent encoders with possibly different BANDWIDTH. The new
GetMaxPlaybackRate queries all of them, and returns a playback rate if
all the encoder's rates are equal.
WebRtcOpus_GetSurroundParameters is a configuration convention. It
maps the number of channels to a multi-stream encoder/decoder
configuration. As described in RFC 7845
https://tools.ietf.org/html/rfc7845#section-5.1.1, a multi-stream
encoder/decoder needs a number of streams, number of coupled streams
and a 255-byte mapping array. The function GetSurroundParameters
computes all of these from the number of channels. [1, 2, 4, 6, 8]
channels are supported.
Bug: webrtc:8649
Change-Id: I271de8e387d738254d6aa53af7fcf8644a53edb5
Reviewed-on: https://webrtc-review.googlesource.com/c/111750
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26293}
This replaces the current usage of AudioProcessing::level_estimator()
in that test.
The unit tests that specifically test the level_estimator API are left
in place, until the level_estimator API itself is removed.
Bug: webrtc:9947
Change-Id: I73301c1478d2c9763bb49598a692142229102876
Reviewed-on: https://webrtc-review.googlesource.com/c/114550
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26049}
None of these scripts or files have been used in a very long time. They
are removed for the same reason, and since the data files add to the
weight of the resources folder.
Bug: webrtc:5289
Change-Id: Ia14a46aed180f286fa881fe5f60da6973a5fe027
Reviewed-on: https://webrtc-review.googlesource.com/c/109022
Commit-Queue: Oleh Prypin <oprypin@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25502}
The test is refitted to use the AudioProcessingStats struct to get
reference data.
The old metrics do not map entirely injectively to the new ones, so the
reference protobuf and files are updated as well.
Bug: webrtc:9535
Change-Id: I546dca2979380e03895af0077bfc77ffd24abe36
Reviewed-on: https://webrtc-review.googlesource.com/100100
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24740}
This is a reland of 404be7f302
It adds support for reading .yuv files as well to not break anything.
Original change's description:
> Add Y4mFileReader
>
> Encapsulate logic for reading .y4m video files in a single class. We
> currently have spread out logic for opening .y4m files with partial
> parsing. This CL consolidates this logic into a single class with a well
> defined interface.
>
> Change-Id: Id61673b3c95a0053b30e95b4cf382e1c6b05fc30
> Bug: webrtc:9642
> Reviewed-on: https://webrtc-review.googlesource.com/94772
> Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
> Reviewed-by: Paulina Hensman <phensman@webrtc.org>
> Commit-Queue: Magnus Jedvert <magjed@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24398}
TBR=phensman,phoglund
Bug: webrtc:9642
Change-Id: Idecc5ec5da767221a5f5b439989f4fe07e3b3615
Reviewed-on: https://webrtc-review.googlesource.com/97983
Commit-Queue: Magnus Jedvert <magjed@webrtc.org>
Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24571}
Encapsulate logic for reading .y4m video files in a single class. We
currently have spread out logic for opening .y4m files with partial
parsing. This CL consolidates this logic into a single class with a well
defined interface.
Change-Id: Id61673b3c95a0053b30e95b4cf382e1c6b05fc30
Bug: webrtc:9642
Reviewed-on: https://webrtc-review.googlesource.com/94772
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Reviewed-by: Paulina Hensman <phensman@webrtc.org>
Commit-Queue: Magnus Jedvert <magjed@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24398}
For example, currently "resources/audio_coding/F02_tlm10.OUT20.sha1" would have been ignored by the pattern "**/*.OUT*".
No-Try: True
Bug: None
Change-Id: I91243a301950485cb61d5f72a00af08372ec7951
Reviewed-on: https://webrtc-review.googlesource.com/92085
Commit-Queue: Oleh Prypin <oprypin@webrtc.org>
Reviewed-by: Yves Gerey <yvesg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24185}
All clients who do not own their own APM turn it off by default
(in WebrtcVoiceEngine). AECM with comfort noise is a little-exercised
code path. Configurability of this setting is going away, so we're
better off disabling it by default.
Bug: webrtc:9535
Change-Id: Iba839aa18e79ae29ff20bdf6e30de77870ba4143
Reviewed-on: https://webrtc-review.googlesource.com/89583
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24078}
