its content is duplicated in the report_block_data member
Bug: webrtc:10678
Change-Id: I89421ae4ab5f727a233161924372105e222ed404
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/219080
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#34039}
This is related to upcoming changes whereby it will be enforced that
calls to SetInterface(<valid ptr>) and SetInterface(nullptr) be matched
up correctly.
Bug: webrtc:11993
Change-Id: Ic022f9487a7ab297adaced8e620e2384e055673b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/217241
Commit-Queue: Tommi <tommi@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33903}
This is a refactor to simplify a follow-up CL of adding
SdpVideoFormat::IsSameCodec.
The original files media/base/h264_profile_level_id.* and
media/base/vp9_profile.h must be kept until downstream projects
stop using them.
Bug: chroimium:1187565
Change-Id: Ib39eca095a3d61939a914d9bffaf4b891ddd222f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/215236
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33782}
BaseChannel adds and removes receive streams on the worker thread
(UpdateRemoteStreams_w) and then posts a task to the network thread to
update the demuxer criteria. Until this happens, OnRtpPacket() keeps
forwarding "recently removed" ssrc packets to the WebRtcVideoChannel.
Furthermore WebRtcVideoChannel::OnPacketReceived() posts task from the
network thread to the worker thread, so even if the demuxer criteria was
instantly updated we would still have an issue of in-flight packets for
old ssrcs arriving late on the worker thread inside WebRtcVideoChannel.
The wrong ssrc could also arrive when the demuxer goes from forwarding
all packets to a single m= section to forwarding to different m=
sections. In this case we get packets with an ssrc for a recently
created m= section and the ssrc was never intended for our channel.
This is a problem because when WebRtcVideoChannel sees an unknown ssrc
it treats it as an unsignalled stream, creating and destroying default
streams which can be very expensive and introduce large delays when lots
of packets are queued up.
This CL addresses the issue with callbacks for when a demuxer criteria
update is pending and when it has completed. During this window of time,
WebRtcVideoChannel will drop packets for unknown ssrcs.
This approach fixes the race without introducing any new locks and
packets belonging to ssrcs that were not removed continue to be
forwarded even if a demuxer criteria update is pending. This should make
a=inactive for 50p receive streams a glitch-free experience.
Bug: webrtc:12258, chromium:1069603
Change-Id: I30d85f53d84e7eddf7d21380fb608631863aad21
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/214964
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Taylor <deadbeef@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33757}
This change adds support for emitting encoded frames
for recording when the decoder can't easily read out
encoded width and height as is the case for AV1 streams,
in which case the information is buried in OBUs. Downstream
project relies on resolution information being present for key
frames. With the change, VideoReceiveStream2 infers the
resolution from decoded frames, and supplies it in the
RecordableEncodedFrames.
Bug: chromium:1191972
Change-Id: I07beda6526206c80a732976e8e19d3581489b8fe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/214126
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Markus Handell <handellm@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33662}
provides an implementation of the rtx-time parameter from
https://tools.ietf.org/html/rfc4588#section-8
that determines the maximum time a receiver waits for a frame
before sending a PLI.
BUG=webrtc:12420
Change-Id: Iff20d92c806989cd4d56fe330d105b3dd127ed24
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/201400
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33627}
This reverts commit 31c5c9da35.
Reason for revert: made QP parser thread-safe https://webrtc.googlesource.com/src/+/0e42cf703bd111fde235d06d08b02d3a7b02c727
Original change's description:
> Revert "Reland "Enable quality scaling when allowed""
>
> This reverts commit 0021fe7793.
>
> Reason for revert: Broken on linux_tsan bot: https://ci.chromium.org/ui/p/webrtc/builders/ci/Linux%20Tsan%20v2/25329/overview
>
> Original change's description:
> > Reland "Enable quality scaling when allowed"
> >
> > This reverts commit eb449a979b.
> >
> > Reason for revert: Added QP parsing in https://webrtc.googlesource.com/src/+/8639673f0c098efc294a7593fa3bd98e28ab7508
> >
> > Original change's description:
> > Before this CL quality scaling was conditioned on scaling settings
> > provided by encoder. That should not be a requirement since encoder
> > may not be aware of quality scaling which is a WebRTC feature. In M90
> > chromium HW encoders do not provide scaling settings (chromium:1179020).
> > The default scaling settings provided by these encoders are not correct
> > (b/181537172).
> >
> > This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
> > is set to true in singlecast with normal video feed (not screen sharing)
> > mode. If quality scaling is allowed it is enabled no matter whether
> > scaling settings are present in encoder info or not. Setting from
> > QualityScalingExperiment are used in case if not provided by encoder.
> >
> > Bug: chromium:1179020
> > Bug: webrtc:12511
> > Change-Id: I97911fde9005ec25028a640a3f007d12f2bbc2e5
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/211349
> > Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> > Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> > Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#33438}
>
> TBR=brandtr@webrtc.org,ilnik@webrtc.org,ssilkin@webrtc.org,rubber-stamper@appspot.gserviceaccount.com
>
> Change-Id: Id7633a1e98f95762e81487887f83a0c35f89195c
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: chromium:1179020
> Bug: webrtc:12511
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/211352
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#33439}
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: chromium:1179020
Bug: webrtc:12511
Change-Id: I3a31e1c1fdf7da93226f8c1e0a96b43fe0b786df
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/212026
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33481}
This reverts commit 0021fe7793.
Reason for revert: Broken on linux_tsan bot: https://ci.chromium.org/ui/p/webrtc/builders/ci/Linux%20Tsan%20v2/25329/overview
Original change's description:
> Reland "Enable quality scaling when allowed"
>
> This reverts commit eb449a979b.
>
> Reason for revert: Added QP parsing in https://webrtc.googlesource.com/src/+/8639673f0c098efc294a7593fa3bd98e28ab7508
>
> Original change's description:
> Before this CL quality scaling was conditioned on scaling settings
> provided by encoder. That should not be a requirement since encoder
> may not be aware of quality scaling which is a WebRTC feature. In M90
> chromium HW encoders do not provide scaling settings (chromium:1179020).
> The default scaling settings provided by these encoders are not correct
> (b/181537172).
>
> This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
> is set to true in singlecast with normal video feed (not screen sharing)
> mode. If quality scaling is allowed it is enabled no matter whether
> scaling settings are present in encoder info or not. Setting from
> QualityScalingExperiment are used in case if not provided by encoder.
>
> Bug: chromium:1179020
> Bug: webrtc:12511
> Change-Id: I97911fde9005ec25028a640a3f007d12f2bbc2e5
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/211349
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#33438}
TBR=brandtr@webrtc.org,ilnik@webrtc.org,ssilkin@webrtc.org,rubber-stamper@appspot.gserviceaccount.com
Change-Id: Id7633a1e98f95762e81487887f83a0c35f89195c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:1179020
Bug: webrtc:12511
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/211352
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33439}
This reverts commit eb449a979b.
Reason for revert: Added QP parsing in https://webrtc.googlesource.com/src/+/8639673f0c098efc294a7593fa3bd98e28ab7508
Original change's description:
Before this CL quality scaling was conditioned on scaling settings
provided by encoder. That should not be a requirement since encoder
may not be aware of quality scaling which is a WebRTC feature. In M90
chromium HW encoders do not provide scaling settings (chromium:1179020).
The default scaling settings provided by these encoders are not correct
(b/181537172).
This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
is set to true in singlecast with normal video feed (not screen sharing)
mode. If quality scaling is allowed it is enabled no matter whether
scaling settings are present in encoder info or not. Setting from
QualityScalingExperiment are used in case if not provided by encoder.
Bug: chromium:1179020
Bug: webrtc:12511
Change-Id: I97911fde9005ec25028a640a3f007d12f2bbc2e5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/211349
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33438}
This reverts commit 83be84bb74.
Reason for revert: Suspect of crbug.com/1185276
Original change's description:
> Reland "Enable quality scaling when allowed"
>
> This reverts commit 609b524dd3.
>
> Reason for revert: Disable QualityScalingAllowed_QualityScalingEnabled on iOS.
>
> Original change's description:
> Before this CL quality scaling was conditioned on scaling settings
> provided by encoder. That should not be a requirement since encoder
> may not be aware of quality scaling which is a WebRTC feature. In M90
> chromium HW encoders do not provide scaling settings (chromium:1179020).
> The default scaling settings provided by these encoders are not correct
> (b/181537172).
>
> This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
> is set to true in singlecast with normal video feed (not screen sharing)
> mode. If quality scaling is allowed it is enabled no matter whether
> scaling settings are present in encoder info or not. Setting from
> QualityScalingExperiment are used in case if not provided by encoder.
>
> Bug: chromium:1179020
> Bug: webrtc:12511
> Change-Id: Ia0923e5a62acdfdeb06f9aad5d670be8a0f8d746
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209643
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Åsa Persson <asapersson@webrtc.org>
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#33385}
Bug: chromium:1179020
Bug: webrtc:12511
Change-Id: I7004014c5936176f8c125aeb55da91ce095b266e
TBR: ssilkin@webrtc.org
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209708
Reviewed-by: Guido Urdaneta <guidou@webrtc.org>
Commit-Queue: Guido Urdaneta <guidou@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33393}
This reverts commit 609b524dd3.
Reason for revert: Disable QualityScalingAllowed_QualityScalingEnabled on iOS.
Original change's description:
Before this CL quality scaling was conditioned on scaling settings
provided by encoder. That should not be a requirement since encoder
may not be aware of quality scaling which is a WebRTC feature. In M90
chromium HW encoders do not provide scaling settings (chromium:1179020).
The default scaling settings provided by these encoders are not correct
(b/181537172).
This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
is set to true in singlecast with normal video feed (not screen sharing)
mode. If quality scaling is allowed it is enabled no matter whether
scaling settings are present in encoder info or not. Setting from
QualityScalingExperiment are used in case if not provided by encoder.
Bug: chromium:1179020
Bug: webrtc:12511
Change-Id: Ia0923e5a62acdfdeb06f9aad5d670be8a0f8d746
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209643
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33385}
This reverts commit 752cbaba90.
Reason for revert: The test VideoStreamEncoderTest.QualityScalingAllowed_QualityScalingEnabled seems to fail on iOS.
Original change's description:
> Enable quality scaling when allowed
>
> Before this CL quality scaling was conditioned on scaling settings
> provided by encoder. That should not be a requirement since encoder
> may not be aware of quality scaling which is a WebRTC feature. In M90
> chromium HW encoders do not provide scaling settings (chromium:1179020).
> The default scaling settings provided by these encoders are not correct
> (b/181537172).
>
> This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
> is set to true in singlecast with normal video feed (not screen sharing)
> mode. If quality scaling is allowed it is enabled no matter whether
> scaling settings are present in encoder info or not. Setting from
> QualityScalingExperiment are used in case if not provided by encoder.
>
> Bug: chromium:1179020, webrtc:12511
> Change-Id: I83d55319ce4b9f4fb143187ced94a16a778b4de3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209184
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Åsa Persson <asapersson@webrtc.org>
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#33373}
Bug: chromium:1179020
Bug: webrtc:12511
Change-Id: Icabf2d9a034d359f79491f2c37f1044f17a7445d
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209641
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Björn Terelius <terelius@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33381}
Before this CL quality scaling was conditioned on scaling settings
provided by encoder. That should not be a requirement since encoder
may not be aware of quality scaling which is a WebRTC feature. In M90
chromium HW encoders do not provide scaling settings (chromium:1179020).
The default scaling settings provided by these encoders are not correct
(b/181537172).
This CL adds is_quality_scaling_allowed to VideoEncoderConfig. The flag
is set to true in singlecast with normal video feed (not screen sharing)
mode. If quality scaling is allowed it is enabled no matter whether
scaling settings are present in encoder info or not. Setting from
QualityScalingExperiment are used in case if not provided by encoder.
Bug: chromium:1179020, webrtc:12511
Change-Id: I83d55319ce4b9f4fb143187ced94a16a778b4de3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/209184
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33373}
In practice, support for multiple sinks is not needed and supporting
the API that allows for dynamically adding/removing sinks at runtime,
adds to the complexity of the implementation.
This CL removes that Add/Remove methods for secondary sinks as well
as vectors of callback pointers (which were either of size 0 or 1).
Instead, an optional callback pointer is added to the config struct
for VideoReceiveStream, that an implementation can consider to be
const and there's not a need to do thread synchronization for that
pointer for every network packet.
As part of webrtc:11993, this simplifies the work towards keeping
the processing of network packets on the network thread. The secondary
sinks, currently operate on the worker thread.
Bug: webrtc:11993
Change-Id: I10c473e57d3809527a1b689f4352e903a4c78168
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/207421
Commit-Queue: Tommi <tommi@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33272}
Functionality wise, there should be no change with this CL, aside
from updating tests to anticipate OnPacketReceived to handle the packet
asynchronously (as already was the case via BaseChannel).
This only removes the network->worker hop out of the BaseChannel
class into the WebRTC MediaChannel implementations. However, it updates
the interface contract between BaseChannel and MediaChannel to align
with how we want things to work down the line, i.e. avoid hopping to
the worker thread for every rtp packet.
The following steps will be to update the video and voice channel
classes to call Call::DeliverPacket on the network thread and only
handle unsignalled SSRCs on the worker (exception case).
Bug: webrtc:11993
Change-Id: If0540874444565dc93773aee89d862f3bfc9c502
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/202242
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Tommi <tommi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#33040}
This is a reland of f08db1be94
Original change's description:
> Enable FlexFEC as a receiver video codec by default
>
> - Add Flex FEC format as default supported receive codec
> - Disallow advertising FlexFEC as video sender codec by default until implementation is complete
> - Toggle field trial "WebRTC-FlexFEC-03-Advertised"s behavior for receiver to use as kill-switch to prevent codec advertising
>
> Bug: webrtc:8151
> Change-Id: Iff367119263496fb335500e96641669654b45834
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/191947
> Commit-Queue: Christoffer Rodbro <crodbro@webrtc.org>
> Reviewed-by: Ying Wang <yinwa@webrtc.org>
> Reviewed-by: Christoffer Rodbro <crodbro@webrtc.org>
> Reviewed-by: Stefan Holmer <stefan@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32639}
Bug: webrtc:8151
Change-Id: I36cbe833dc2131d72f1d7e8f96d058d0caa94ff9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/195363
Reviewed-by: Christoffer Rodbro <crodbro@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Commit-Queue: Christoffer Rodbro <crodbro@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32819}
Changes the video payload type allocation to use the
lower dynamic payload type range [35,65] described in
https://www.iana.org/assignments/rtp-parameters/rtp-parameters.xhtml#rtp-parameters-1
for new codecs such as FlexFEC.
BUG=webrtc:12194
Change-Id: I71782199074e0fc94fa6aa8c36afeb68221a2839
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/195822
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32799}
Without this change, if the user disables QVGA and VGA streams via |active|
flags in SetParamters, the resulting stream would have too high min bitrate.
This would lead to bad performance and low quality adaptation rate.
Bug: none
Change-Id: I919a30bfb248c06747c989afe6965b3afaef2260
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/195325
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32706}
This reverts commit f08db1be94.
Reason for revert: It looks like this breaks Chromium FYI Windows bots.
See https://ci.chromium.org/p/chromium/builders/webrtc.fyi/WebRTC%20Chromium%20FYI%20Win10%20Tester/6988.
If this is not the culprit I will reland.
Original change's description:
> Enable FlexFEC as a receiver video codec by default
>
> - Add Flex FEC format as default supported receive codec
> - Disallow advertising FlexFEC as video sender codec by default until implementation is complete
> - Toggle field trial "WebRTC-FlexFEC-03-Advertised"s behavior for receiver to use as kill-switch to prevent codec advertising
>
> Bug: webrtc:8151
> Change-Id: Iff367119263496fb335500e96641669654b45834
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/191947
> Commit-Queue: Christoffer Rodbro <crodbro@webrtc.org>
> Reviewed-by: Ying Wang <yinwa@webrtc.org>
> Reviewed-by: Christoffer Rodbro <crodbro@webrtc.org>
> Reviewed-by: Stefan Holmer <stefan@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32639}
TBR=brandtr@webrtc.org,tommi@webrtc.org,stefan@webrtc.org,crodbro@webrtc.org,crodbro@google.com,yinwa@webrtc.org,philipp.hancke@googlemail.com,hmaniar@nvidia.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:8151
Change-Id: Ia1788a1cf34e0fc9500a081552f6ed03d0995d5b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/194334
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32657}
- Add Flex FEC format as default supported receive codec
- Disallow advertising FlexFEC as video sender codec by default until implementation is complete
- Toggle field trial "WebRTC-FlexFEC-03-Advertised"s behavior for receiver to use as kill-switch to prevent codec advertising
Bug: webrtc:8151
Change-Id: Iff367119263496fb335500e96641669654b45834
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/191947
Commit-Queue: Christoffer Rodbro <crodbro@webrtc.org>
Reviewed-by: Ying Wang <yinwa@webrtc.org>
Reviewed-by: Christoffer Rodbro <crodbro@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32639}
Currently, when only max bitrate available and min bitratea & target
bitrate are missing from encoding config, the target bitrate is decided
by the calculation from GetSimulcastConfig() according to width/height/qp.
The max bitrate doesn't play a role here other than ensure target < max.
This will make the target bitrate cap at some calculated number even
when control message gives much larger allocation through max bitrate.
In our cases, the L0 (at 180p) is capped at 80-90kbps even control
message gives L0's max bitrate over 300kbps. This under-use of bandwidth
happens to all layer other than top layer. Top layer will be compensated
with all the left bandwidth up to max at last.
Since in web api, we cannot pass down either min bitrate or target bitrate
(https://developer.mozilla.org/en-US/docs/Web/API/RTCRtpEncodingParameters).
We propose a new logic to take max bitrate into consideration in this case,
use 3/4 max bitrate or calculated target bitrate whichever is larger.
Bug: None
Change-Id: I2234b4636daa379fd47d4bbe764cf8307b9a1ea4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186161
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32308}
This is a reland of
https://webrtc-review.googlesource.com/c/src/+/174261
Patchset 1 contains the old cl (plus a merge conflict fix).
Later patchets are bufixes: A PeerConnection can be created without a
Call instance (in the case of DataChannel only), so we can't always
use that to fetch the current trials.
Old CL descritpion:
This replaces field_trial:: -based functions from system_wrappers.
Field trials are still used as fallback, but injectable trials are now
possible.
// Since re-land is otherwise unchanged, setting previous reviewers as TBR
TBR=kthelgason@webrtc.org,mbonadei@webrtc.org,stefan@webrtc.org,srte@webrtc.org
Bug: webrtc:11926
Change-Id: I57a9e8c3454f226f77fb93215bcac83da65034b0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185003
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32163}
This replaces field_trial:: -based functions from system_wrappers.
Field trials are still used as fallback, but injectable trials are now
possible.
Bug: webrtc:11926
Change-Id: I70f28c4fbabf6d9e55052342000e38612b46682c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/174261
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32129}
This member of the CodecInfo struct was set in several places, but not
used for anything. To aid deletion, this cl defines a default implementation
of VideoEncoderFactory::QueryVideoEncoder.
The next step is to delete almost all downstream implementations of that method,
since the only classes that have to implement it are the few factories that
produce "internal source" encoders, e.g., for Chromium remoting.
Bug: None
Change-Id: I1f0dbf0d302933004ebdc779460cb2cb3a894e02
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/179520
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31844}
This fixes a crash that could happen if substreams exist but there is
no kMedia substream yet. There was an assumption that we either had no
substreams or at least one kMedia substream, but this was not true.
The correct thing to do is to ignore substream stats that are not
associated with any kMedia substream, because we only produce
"outbound-rtp" stats objects for existing kMedia substreams.
A test is added to make sure no stats are returned. Prior to the fix,
this test would crash.
Bug: chromium:1090712
Change-Id: Ib1f8494a162542ae56bdd2df7618775a3473419b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/176446
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31442}
Modernise functions to unified MOCK_METHOD macro,
delete few deprecated functions on the way.
add one missing function (in MockEncodedImageCallback)
Remove proxy mock function (in MockVideoBitrateAllocatorFactory)
Remove default constructors and destructors
Bug: None
Change-Id: Ibebb0d9e3c9be5877649af7bde8b87222ddf04fb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/174751
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31195}
This reverts commit 9a925c9ce3.
Reason for revert: The original CL is updated in PS #2 to
fix the googRtt issue which was that when the legacy sender
stats were put in "aggregated_senders" we forgot to update
rtt_ms the same way that we do it for "senders".
Original change's description:
> Revert "Improve outbound-rtp statistics for simulcast"
>
> This reverts commit da6cda839d.
>
> Reason for revert: Breaks googRtt in legacy getStats API
>
> Original change's description:
> > Improve outbound-rtp statistics for simulcast
> >
> > Bug: webrtc:9547
> > Change-Id: Iec4eb976aa11ee743805425bedb77dcea7c2c9be
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/168120
> > Reviewed-by: Sebastian Jansson <srte@webrtc.org>
> > Reviewed-by: Erik Språng <sprang@webrtc.org>
> > Reviewed-by: Henrik Boström <hbos@webrtc.org>
> > Reviewed-by: Harald Alvestrand <hta@webrtc.org>
> > Commit-Queue: Eldar Rello <elrello@microsoft.com>
> > Cr-Commit-Position: refs/heads/master@{#31097}
>
> TBR=hbos@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,srte@webrtc.org,hta@webrtc.org,elrello@microsoft.com
>
> # Not skipping CQ checks because original CL landed > 1 day ago.
>
> Bug: webrtc:9547
> Change-Id: I06673328c2a5293a7eef03b3aaf2ded9d13df1b3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/174443
> Reviewed-by: Henrik Boström <hbos@webrtc.org>
> Commit-Queue: Henrik Boström <hbos@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#31165}
TBR=hbos@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,srte@webrtc.org,hta@webrtc.org,elrello@microsoft.com
# Not skipping CQ checks because this is a reland.
Bug: webrtc:9547
Change-Id: I723744c496c3c65f95ab6a8940862c8b9f544338
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/174480
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31169}
This is a reland of d335426a39.
The revert was premature: the failing tests were known to be flaky
(crbug.com/1066515, crbug.com/1066453, crbug.com/1066407, crbug.com/1066399)
Original change's description:
> Let WebRtcVideoChannel::ResetUnsignaledRecvStream delete all default streams.
>
> This CL changes WebRtcVideoChannel::ResetUnsignaledRecvStream so
> that it deletes all default streams created by
> WebRtcVideoChannel::AddRecvStream. This is needed for the case that
> there are lingering default streams, whose SSRCs are different
> from the SSRCs that were subsequently signaled. This can happen
> when there are multiple "m= sections" and the early media is
> sent to an "m= section" that is later not supposed to be the
> sink for that particular SSRC.
>
> Default streams whose SSRC match the subsequently signaled
> SSRC is already handled here: https://source.chromium.org/chromium/chromium/src/+/master:third_party/webrtc/media/engine/webrtc_video_engine.cc;l=1386;drc=22387b44ff173d263b434889d394cea90368ab06?originalUrl=https:%2F%2Fcs.chromium.org%2F
>
> Bug: webrtc:11477
> Change-Id: I96ed7e35b4904fb0757fe5824f8afa6f1b9a565e
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172622
> Reviewed-by: Harald Alvestrand <hta@webrtc.org>
> Reviewed-by: Magnus Flodman <mflodman@webrtc.org>
> Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30971}
TBR=mflodman@webrtc.org,hta@webrtc.org
Bug: webrtc:11477
Change-Id: I70b8fa47b4d1d0aa36fed4d8612e13fa7f992925
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172782
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30986}
This reverts commit d335426a39.
Reason for revert: Breaking RTCPeerConnectionTest.GetTrackRemoveStreamAndGCAll.
Original change's description:
> Let WebRtcVideoChannel::ResetUnsignaledRecvStream delete all default streams.
>
> This CL changes WebRtcVideoChannel::ResetUnsignaledRecvStream so
> that it deletes all default streams created by
> WebRtcVideoChannel::AddRecvStream. This is needed for the case that
> there are lingering default streams, whose SSRCs are different
> from the SSRCs that were subsequently signaled. This can happen
> when there are multiple "m= sections" and the early media is
> sent to an "m= section" that is later not supposed to be the
> sink for that particular SSRC.
>
> Default streams whose SSRC match the subsequently signaled
> SSRC is already handled here: https://source.chromium.org/chromium/chromium/src/+/master:third_party/webrtc/media/engine/webrtc_video_engine.cc;l=1386;drc=22387b44ff173d263b434889d394cea90368ab06?originalUrl=https:%2F%2Fcs.chromium.org%2F
>
> Bug: webrtc:11477
> Change-Id: I96ed7e35b4904fb0757fe5824f8afa6f1b9a565e
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172622
> Reviewed-by: Harald Alvestrand <hta@webrtc.org>
> Reviewed-by: Magnus Flodman <mflodman@webrtc.org>
> Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30971}
TBR=brandtr@webrtc.org,mflodman@webrtc.org,hta@webrtc.org
Change-Id: I41dc2ea2fc43bb3f7cca2fc5e946c58baa54e00a
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:11477
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172760
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30979}
This CL changes WebRtcVideoChannel::ResetUnsignaledRecvStream so
that it deletes all default streams created by
WebRtcVideoChannel::AddRecvStream. This is needed for the case that
there are lingering default streams, whose SSRCs are different
from the SSRCs that were subsequently signaled. This can happen
when there are multiple "m= sections" and the early media is
sent to an "m= section" that is later not supposed to be the
sink for that particular SSRC.
Default streams whose SSRC match the subsequently signaled
SSRC is already handled here: https://source.chromium.org/chromium/chromium/src/+/master:third_party/webrtc/media/engine/webrtc_video_engine.cc;l=1386;drc=22387b44ff173d263b434889d394cea90368ab06?originalUrl=https:%2F%2Fcs.chromium.org%2F
Bug: webrtc:11477
Change-Id: I96ed7e35b4904fb0757fe5824f8afa6f1b9a565e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172622
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Magnus Flodman <mflodman@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30971}
This reverts commit 8e8b36a94a.
Reason for revert: The CL has been improved with the following changes,
- Fixed negotiation of send/receive only clients.
- Handles the implicit assumption that any H264 decoder also can
decode H264 constraint baseline.
Original change's description:
> Distinguish between send and receive codecs
>
> Even though send and receive codecs may be the same, they might have
> different support in HW. Distinguish between send and receive codecs
> to be able to keep track of which codecs have HW support.
>
> Bug: chromium:1029737
> Change-Id: Id119560becadfe0aaf861c892a6485f1c2eb378d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165763
> Commit-Queue: Johannes Kron <kron@webrtc.org>
> Reviewed-by: Steve Anton <steveanton@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30284}
Change-Id: I834ed48ee78d04922c73e2836165e476925e1cc5
Bug: chromium:1029737
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/168605
Commit-Queue: Johannes Kron <kron@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Johannes Kron <kron@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30932}
--- Background ---
The webrtc::VideoSendStream::StreamStats are converted into
VideoSenderInfo objects which turn into "outbound-rtp" stats objects in
getStats() (or "ssrc" objects in legacy getStats()).
StreamStats are created for each type of substream: RTP media streams,
RTX streams and FlexFEC streams - each with individual packet counters.
The RTX stream is responsible for retransmissions of a referenced media
stream and the FlexFEC stream is responsible for FEC of a referenced
media stream. RTX/FEC streams do not show up as separate objects in
getStats(). Only the media streams become "outbound-rtp" objects, but
their packet and byte counters have to include the RTX and FEC counters.
--- Overview of this CL ---
This CL adds MergeInfoAboutOutboundRtpSubstreams(). It takes
StreamStats of all kinds as input, and outputs media-only StreamStats
- incorporating the RTX and FEC counters into the relevant media
StreamStats.
The merged StreamStats objects is a smaller set of objects than the
non-merged counterparts, but when aggregating all packet counters
together we end up with exact same packet and count as before.
Because WebRtcVideoSendStream::GetVideoSenderInfo() currently aggregates
the StreamStats into a single VideoSenderInfo (single "outbound-rtp"),
this CL should not have any observable side-effects. Prior to this CL:
aggregate StreamStats. After this CL: merge StreamStats and then
aggregate them.
However, when simulcast stats are implemented (WIP CL:
https://webrtc-review.googlesource.com/c/src/+/168120) each RTP media
stream should turn into an individual "outbound-rtp" object. We will
then no longer aggregate all StreamStats into a single "info". This CL
unblocks simulcast stats by providing StreamStats objects that could be
turned into individual VideoSenderInfos.
--- The Changes ---
1. Methods added to RtpConfig to be able to easily tell the relationship
between RTP, RTX and FEC ssrcs.
2. StreamStats gets a StreamType (kMedia, kRtx or kFlexfec) that
replaces the booleans (is_rtx, is_flexfec).
3. "referenced_media_ssrc" is added to StreamStats, making it possible
to tell which kRtx/kFlexFec stream stats need to be merged with which
kMedia StreamStats.
4. MergeInfoAboutOutboundRtpSubstreams() added and used.
Bug: webrtc:11439
Change-Id: Iaf9002041169a054ddfd32c7ea06bd1dc36c6bca
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170826
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30869}
Ignoring retransmissions carried over the RTX stream was a bug. This CL
fixes the bug, so that all retransmissions are accounted for. It also
adds test coverage for this.
This resolves https://crbug.com/webrtc/11440 but does not resolve
https://crbug.com/webrtc/11439.
Bug: webrtc:11440, webrtc:11439
Change-Id: Ifb10aa60a0f453738aaa30de90eaa5b31f9ec265
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170639
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30822}
There was quite a lot of excessive qualification in the test code.
Cleaned up by adding a few using directives.
BUG=None
Change-Id: I03487f457f15f663acf276ce2a4a9cbbc9804101
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170467
Commit-Queue: Markus Handell <handellm@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30806}
This change adds exposure of a new transceiver method for getting
the total set of supported extensions stored as an attribute,
and their direction. If the direction is kStopped, the extension
is not signalled in Unified Plan SDP negotiation.
Note: SDP negotiation is not modified by this change.
Changes:
- RtpHeaderExtensionCapability gets a new RtpTransceiverDirection,
indicating either kStopped (extension available but not signalled),
or other (extension signalled).
- RtpTransceiver gets the new method as described above. The
default value of the attribute comes from the voice and video
engines as before.
https://chromestatus.com/feature/5680189201711104.
go/rtp-header-extension-ip
Intent to prototype: https://groups.google.com/a/chromium.org/g/blink-dev/c/65YdUi02yZk
Bug: chromium:1051821
Change-Id: I440443b474db5b1cfe8c6b25b6c10a3ff9c21a8c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170235
Commit-Queue: Markus Handell <handellm@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30800}
