- Added field trial to force issuing of key frame on deactivation of
spatial layer. This fixes video corruptions in VP9 K-SVC tests where
layers can be activated/deactivated on-fly due to bandwidth change.
- Added 100ms network delay to the test with restricted link capacity.
This fixes rapid drop of available bandwidth which happens when
bandwidth overuse is detected in the very beginning of call and several
feedback packets arrive without any delay. Also, this makes the test
more realistic.
- Disabled filtering of spatial layer in the test with restricted
link capacity. 1) We don't really need filtering in this test.
2) It appeared that in video quality tests filtering is done before
sending packets to network simulator. Filtering of high layers causes
channel underuse which is compensated by increase of sent bitrate.
This is why we got sent/media bitrates about 2Mbps in test where link
was limited to 1Mbps.
Bug: chromium:889017
Change-Id: I33ffcee0274523f6183c3bbd27d3d29395417d52
Reviewed-on: https://webrtc-review.googlesource.com/c/103520
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24988}
Mark all low spatial layer frames as references (not just frames of
active low spatial layers) if inter-layer prediction is enabled since
these frames are indirect references of high spatial layer, which can
later be enabled without key frame.
Bug: webrtc:9782
Change-Id: Iffa5039fab2673a5582e7cdc9be4a36d9e8deb63
Reviewed-on: https://webrtc-review.googlesource.com/102063
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24849}
VP9 frame rate controller is supposed to be used in screen mode only
but it was partially enabled in normal video mode. This restricts use
of VP9 frame rate controller to screen mode.
Bug: chromium:884164
Change-Id: Ie2eaa31f3364a8abccbc4171007708cf7040fc38
Reviewed-on: https://webrtc-review.googlesource.com/100424
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24769}
Set target frame rate of spatial layer equal to minimum of two: maximum
frame rate of layer (SpatialLayer::maxFramerate) and maximum frame rate
of codec (VideoCodec::maxFramerate).
Bug: webrtc:9740, webrtc:9739, chromium:882358
Change-Id: I34f36e7fd2889f0417474347abab5327fa2d9d7c
Reviewed-on: https://webrtc-review.googlesource.com/99501
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24686}
This is a reland of ae9e188e67
Original change's description:
> Frame rate controller per spatial layer.
>
> This allows VP9 encoder wrapper to control frame rate of each spatial
> layer. The wrapper configures encoder to skip encoding spatial layer
> when actual frame rate exceeds the target frame rate of that layer.
> Target frame rate of high spatial layer is expected to be equal or
> higher then that of low spatial layer. For now frame rate controller
> is only enabled in screen sharing mode.
>
> Added unit test which configures encoder to produce 3 spatial layers
> with frame rates 10, 20 and 30fps and verifies that absolute delta of
> final and target rate doesn't exceed 10%.
>
> Bug: webrtc:9682
> Change-Id: I7a7833f63927dd475e7b42d43e4d29061613e64e
> Reviewed-on: https://webrtc-review.googlesource.com/96640
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24593}
TBR=sprang@webrtc.org
Bug: webrtc:9682
Change-Id: Idcce315890c79301da532f9ba4997e9606f73fb0
Reviewed-on: https://webrtc-review.googlesource.com/99340
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24669}
This reverts commit ae9e188e67.
Reason for revert: Verify if this causes chromium:882358.
Original change's description:
> Frame rate controller per spatial layer.
>
> This allows VP9 encoder wrapper to control frame rate of each spatial
> layer. The wrapper configures encoder to skip encoding spatial layer
> when actual frame rate exceeds the target frame rate of that layer.
> Target frame rate of high spatial layer is expected to be equal or
> higher then that of low spatial layer. For now frame rate controller
> is only enabled in screen sharing mode.
>
> Added unit test which configures encoder to produce 3 spatial layers
> with frame rates 10, 20 and 30fps and verifies that absolute delta of
> final and target rate doesn't exceed 10%.
>
> Bug: webrtc:9682
> Change-Id: I7a7833f63927dd475e7b42d43e4d29061613e64e
> Reviewed-on: https://webrtc-review.googlesource.com/96640
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24593}
TBR=sprang@webrtc.org,ssilkin@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:9682, chromium:882358
Change-Id: Idc4051eef72104823038ed9139bb9c75018f7d86
Reviewed-on: https://webrtc-review.googlesource.com/99082
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24646}
This allows VP9 encoder wrapper to control frame rate of each spatial
layer. The wrapper configures encoder to skip encoding spatial layer
when actual frame rate exceeds the target frame rate of that layer.
Target frame rate of high spatial layer is expected to be equal or
higher then that of low spatial layer. For now frame rate controller
is only enabled in screen sharing mode.
Added unit test which configures encoder to produce 3 spatial layers
with frame rates 10, 20 and 30fps and verifies that absolute delta of
final and target rate doesn't exceed 10%.
Bug: webrtc:9682
Change-Id: I7a7833f63927dd475e7b42d43e4d29061613e64e
Reviewed-on: https://webrtc-review.googlesource.com/96640
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24593}
This is a reland of da0898dfae
Original change's description:
> Add spatial index to EncodedImage.
>
> Replaces the VP8 simulcast index and VP9 spatial index formely part of
> CodecSpecificInfo.
>
> Bug: webrtc:9378
> Change-Id: I80eafd63fbdee0a25864338196a690628b4bd3d2
> Reviewed-on: https://webrtc-review.googlesource.com/83161
> Commit-Queue: Niels Moller <nisse@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Sebastian Jansson <srte@webrtc.org>
> Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
> Reviewed-by: Philip Eliasson <philipel@webrtc.org>
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24485}
Tbr: magjed@webrtc.org
Bug: webrtc:9378
Change-Id: Iff20b656581ef63317e073833d1a326f7118fdfd
Reviewed-on: https://webrtc-review.googlesource.com/96780
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24507}
Replaces the VP8 simulcast index and VP9 spatial index formely part of
CodecSpecificInfo.
Bug: webrtc:9378
Change-Id: I80eafd63fbdee0a25864338196a690628b4bd3d2
Reviewed-on: https://webrtc-review.googlesource.com/83161
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24485}
- Allow use of flexible mode which was blocked in webrtc:9261 since it
only worked together with old screen sharing. Since webrtc:9244 flexible mode
works with both normal and screen coding modes.
- Add unit test that checks that reference list encoder writes into RTP
payload descriptor and the predefined one match.
Bug: webrtc:9585
Change-Id: I4a1bdc51cbf15e7224cc7c271af8b2e3d46657d1
Reviewed-on: https://webrtc-review.googlesource.com/94778
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24355}
Intention is to make the member private, but downstream callers
must be updated to use the accessor methods first.
Bug: webrtc:9378
Change-Id: I3495bd8d545b7234fbea10abfd14f082caa420b6
Reviewed-on: https://webrtc-review.googlesource.com/82160
Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24352}
It didn't account for implicit bitrate allocation, which is used in
some unit tests, when bitrate distribution is done by the encoder
wrapper.
Bug: none
Change-Id: I8fcf28e10f7a6c378580ef917221ad5c8d3869c9
Reviewed-on: https://webrtc-review.googlesource.com/94775
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24343}
This CL is the first step for introducing color space information in webrtc.
- Add ColorSpace class listing color profiles.
- Add ColorSpace as a member of webrtc::VideoFrame.
- Make use of this class by extracting info from VP9 decoder.
Bug: webrtc:9522
Change-Id: I5e2514efee2a193bddb4459261387f2d40e936ad
Reviewed-on: https://webrtc-review.googlesource.com/88540
Reviewed-by: Niklas Enbom <niklas.enbom@webrtc.org>
Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
Commit-Queue: Emircan Uysaler <emircan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23988}
This CL adds VP9 profile information in SDP. It adds the necessary fields and
enums to codec containers.
Additional profiles will be followed.
Bug: webrtc:9376
Change-Id: I78574714f06f8087262a71dd64c01f31a229dd54
Reviewed-on: https://webrtc-review.googlesource.com/81960
Reviewed-by: Taylor (left Google) <deadbeef@webrtc.org>
Reviewed-by: Niklas Enbom <niklas.enbom@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Emircan Uysaler <emircan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23810}
The variable, num_active_spatial_layers, is used to construct ssData.
This CL reverts two instances of num_active_spatial_layers not
related to ssData construction.
Bug: None
Change-Id: I4d90d4578684dfdf8bd5a39c7a2fe778fce4414c
Reviewed-on: https://webrtc-review.googlesource.com/85643
Commit-Queue: Michael Horowitz <mhoro@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23756}
When GetSvcConfig returned fewer spatial layers than the number
statically configured from the test, we would crash on a SIGFPE.
This is not a problem in the production code, since there we
reset the encoder with the correct number of spatial layers
whenever the resolution changes.
Bug: None
Change-Id: I339e4a3c0fa993c7c649533c0eae71e1314194e7
Reviewed-on: https://webrtc-review.googlesource.com/85374
Reviewed-by: Michael Horowitz <mhoro@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23741}
Added distinction between number of configured and number of actively
encoded spatial layers and include number of actively encoded spatial
layers in ssData. Modified layer_filtering_transport.cc test to
parse from the RTP header and use the number of actively encoded
spatial layers for filtering spatial video layers.
Bug: webrtc:9425
Change-Id: Ic9f8895ab08b0626f9bb53a75ec33d8e7eb8706e
Reviewed-on: https://webrtc-review.googlesource.com/84243
Commit-Queue: Michael Horowitz <mhoro@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23716}
Running clang-format with chromium's style guide.
The goal is n-fold:
* providing consistency and readability (that's what code guidelines are for)
* preventing noise with presubmit checks and git cl format
* building on the previous point: making it easier to automatically fix format issues
* you name it
Please consider using git-hyper-blame to ignore this commit.
Bug: webrtc:9340
Change-Id: I694567c4cdf8cee2860958cfe82bfaf25848bb87
Reviewed-on: https://webrtc-review.googlesource.com/81185
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23660}
This is a no-op change because rtc::Optional is an alias to absl::optional
This CL generated by running script from modules with parameters
'pacing video_coding congestion_controller remote_bitrate_estimator':
find $@ -type f \( -name \*.h -o -name \*.cc \) \
-exec sed -i 's|rtc::Optional|absl::optional|g' {} \+ \
-exec sed -i 's|rtc::nullopt|absl::nullopt|g' {} \+ \
-exec sed -i 's|#include "api/optional.h"|#include "absl/types/optional.h"|' {} \+
find $@ -type f -name BUILD.gn \
-exec sed -r -i 's|"(../)*api:optional"|"//third_party/abseil-cpp/absl/types:optional"|' {} \+;
git cl format
Bug: webrtc:9078
Change-Id: I8ea501d7f1ee36e8d8cd3ed37e6b763c7fe29118
Reviewed-on: https://webrtc-review.googlesource.com/83900
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23640}
Use new frame dropping mode - FULL_SUPERFRAME_DROP - in VP9 encoder and
configure it to drop entire superframe if any layer is overshooting.
Bug: none
Change-Id: Ie22ed5c175e530bcce365d40cba0d10cb608ad4f
Reviewed-on: https://webrtc-review.googlesource.com/79622
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23447}
In flexible mode, use VP9E_GET_SVC_REF_FRAME_CONFIG to get indices of
reference frame buffers and buffers update by encoded frame.
Set inter_pic_predicted to true only if encoder actually used temporal
prediction.
Bug: webrtc:9244, webrtc:9270
Change-Id: I4e439abeab9e063d50abdcefc59bf58d6596ea6c
Reviewed-on: https://webrtc-review.googlesource.com/74780
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Reviewed-by: Marco Paniconi <marpan@google.com>
Cr-Commit-Position: refs/heads/master@{#23410}
Thus we don't need to initialize new members added to the structure
in the future.
Bug: None
Change-Id: Id9f5b127c224660f3016973261045b4231a617c1
Reviewed-on: https://webrtc-review.googlesource.com/79080
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23404}
- Limit framerate by dropping frames before encoding.
- The max framerate at screen sharing is set to 5fps.
Bug: webrtc:9261
Change-Id: Icfbbecce33fdce2d746291708db0108e0ba10760
Reviewed-on: https://webrtc-review.googlesource.com/76921
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23316}
- Remove referencing control from encoder wrapper. Use fixed temporal
prediction structure.
- Remove flexible mode from encoder wrapper. It only worked with
referencing control which this CL removes.
- Remove external framerate/bitrate controller. Keep codec's internal
frame dropping enabled at screen sharing.
- Use GetSvcConfig() to configure layering.
Bug: webrtc:9261
Change-Id: I355baa6aab7b98ac5028b3851d1f8ccc82a308e0
Reviewed-on: https://webrtc-review.googlesource.com/76801
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23311}
Intend to delete in a later cl.
Bug: webrtc:6471
Change-Id: Icf0fcd40e0d3287dc59b684fae6552b40b47204a
Reviewed-on: https://webrtc-review.googlesource.com/39511
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23162}
The code changes in this CL configure VP9 SVC to drop a superframe when
the spatial base layer is dropped and to not drop upper spatial layers
when the spatial base layer is not dropped. The changes are effective in
non-flexible mode when codec_.mode == kRealtimeVideo and
number of spatial layers > 1.
Bug: none
Change-Id: I27481b78f733cfc6c007d1ad9f45d69263853149
Reviewed-on: https://webrtc-review.googlesource.com/74261
Commit-Queue: Michael Horowitz <mhoro@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23127}
Request key frame when upper spatial layer is enabled dynamically
and inter-layer prediction is disabled or limited to key pictures.
This is needed to force encoder to produce RTP compatible bitstream
where temporal prediction is limited to the same spatial layer.
Bug: webrtc:9217
Change-Id: I4fc1e3f067689ba7b5c6bd1f5af922a0637f03d7
Reviewed-on: https://webrtc-review.googlesource.com/73580
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23102}
This allows to control inter-layer prediction at encoding VP9 SVC.
There are three options:
1. Disabled.
2. Enabled for all pictures.
3. Enabled for key pictures, disabled for others.
Inter-layer prediction is enabled for all pictures by default.
Bug: none
Change-Id: I49fe43d8744c92bec349d815100ba158519f0664
Reviewed-on: https://webrtc-review.googlesource.com/71500
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23049}
For consistency with the VP9 RTP spec which uses term "picture" for set
of frames which belong to the same time instance.
Bug: none
Change-Id: I30e92d5debb008feb58f770b63fe10c2e0029267
Reviewed-on: https://webrtc-review.googlesource.com/72180
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23040}
This deletes the resilienceOn flag in VideoCodecVP8 and VideoCodecVP9.
Instead, the implementations of VP8 and VP9 set resilience mode
internally, based on the configuration of temporal and spatial layers.
The nack_enabled argument to VideoCodecInitializer::SetupCodec becomes
unused with this cl. In a followup, it will be deleted, together with
the corresponding argument to VideoStreamEncoder methods.
An applications which really wants to configure resilience differently
can do that by injecting an EncoderFactory with encoders behaving
as desired.
Bug: webrtc:8830
Change-Id: I9990faf07d3e95c0fb4a56fcc9a56c2005b4a6fa
Reviewed-on: https://webrtc-review.googlesource.com/71380
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23025}
This converts the reserved bit in VP9 RTP payload descriptor into the
flag which indicates whether current frame can be used for prediction
of next spatial layer or not.
VP9 encoder wrapper sets non_ref_for_inter_layer_pred=false for all
frames for now.
Bug: none
Change-Id: I32f68868686475905fb09173cffd2b6e1bedcb7c
Reviewed-on: https://webrtc-review.googlesource.com/71080
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23010}
