This change reduces the risk of echo due to noise in the headroom
of the linear filter.
Changes:
- Use shorter delay headroom
- Delay headroom is specified in samples (not blocks)
- No hysteresis limit when delay is reduced
Bug: chromium:119942,webrtc:10341
Change-Id: I708e80e26d541dff8ca04b6da2d346a1d59cbfcb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126420
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27126}
This CL removes the legacy, no longer used, render buffering code. It
also removes four unused parameters from the AEC3 config. The change
is tested for bit-exactness.
Bug: webrtc:8671
Change-Id: I2bb6cb7a1097863f228767d757d551c00593bb00
Reviewed-on: https://webrtc-review.googlesource.com/c/119701
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26399}
In this CL a more precise estimation of the Erle is introduced. This is done by creating different estimators that are specialized in different regions of the linear filter. An estimation of which regions were used for generating the current echo estimate is performed and used for selecting the right Erle estimator.
Bug: webrtc:9961
Change-Id: Iba6eb24596c067c3c66d40df590be379d3e1bb7b
Reviewed-on: https://webrtc-review.googlesource.com/c/109400
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25707}
This CL introduces a major refactoring of AecState for the purpose of
simplifying further improvements to the logic in this code.
The changes have successfully been tested for bitexactness.
Bug: webrtc:8671
Change-Id: If98efde55a22c76b093089a11a0562daac7e16e6
Reviewed-on: https://webrtc-review.googlesource.com/c/102362
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24996}
Specially for devices with high echo path gain, even low render signal can allow the linear filter of the AEC3 to converge. However, the conditions that were used for updating the ERLE avoided to update that estimation. In this commit, we allow adapting the ERLE estimator using even low render signal but the update of the ERLE is constraint in a way that decreases are not allowed.
Bug: webrtc:9776
Change-Id: Ic4331efcc47a0b05f394cdea9a88f336292de5a1
Reviewed-on: https://webrtc-review.googlesource.com/101641
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24859}
During this work a parameter is added to the configuration file for the AEC3 that allows to enable or disable the use of a different ERLE estimation for the render onsets.
Bug: webrtc:9677
Change-Id: I467f2cd20683fee06b69c0ba51a90816c9e14f29
Reviewed-on: https://webrtc-review.googlesource.com/96082
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24470}
In this CL we have introduced changes on the estimation of the decay involved in the exponential modeling of the reverberation. Specifically, the instantaneous ERLE has been tracked and used for adapting faster in the regions when the linear filter is performing well. Furthermore, the adaptation is just perform during render activity.
Change-Id: I974fd60e4e1a40a879660efaa24457ed940f77b4
Bug: webrtc:9479
Reviewed-on: https://webrtc-review.googlesource.com/86680
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23836}
The ERLE computation was improved by two means:
- The update function was always called and just parts of the internal code reacts to the converged filter flag
- When computing the ERLE, the ratio of energies is now computed using more points and, therefore, a more robust estimation is achieved.
Bug: webrtc:9284
Change-Id: Ie4f871f19cfad1a13741352ddd7b0a27ad6c3fb6
Reviewed-on: https://webrtc-review.googlesource.com/77767
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23329}
The estimation on how well the linear filter in the AEC3 is performing
is done through an estimation of the ERLE. That estimation is then
used for knowing how much the suppressor needs to react in order to
cancel all the echoes.
In the current code, the ERLE is quite conservative during farend
inactivity and it is common that it goes to a minimum value during
those periods. Under highly varying conditions, that is probably the
right approach. However, in other scenarios where conditions does not
change that fast there is a loss in transparency that could be avoided
by means of a different ERLE estimation.
In the current CL, the ERLE estimation has been changed in the
following way:
- During farend activity the ERLE is estimated through a 1st order AR
smoother. This smoother goes faster toward lower ERLE values than to
larger ones in order to avoid overestimation of this
value. Furthermore, during the beginning of the farend burst, an
estimation of the ERLE is done that aim to represent the performance
of the linear filter during onsets. Under highly variant environments,
those quantities, the ERLE during onsets and the one computed during
the whole farend duration, would differ a lot. If the environment is
more stationary, those quantities would be much more similar.
- During nearend activity the ERLE estimation is decreased toward a
value of the ERLE during onsets.
Bug: webrtc:9040
Change-Id: Ieab86370a4333d2d0cd7041047d29651de4f6827
Reviewed-on: https://webrtc-review.googlesource.com/62342
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22568}
In https://webrtc-review.googlesource.com/c/src/+/1560 we moved WebRTC
from src/webrtc to src/ (in order to preserve an healthy git history).
This CL takes care of fixing header guards, #include paths, etc...
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iea91618212bee0af16aa3f05071eab8f93706578
Reviewed-on: https://webrtc-review.googlesource.com/1561
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19846}
In order to eliminate the WebRTC Subtree mirror in Chromium,
WebRTC is moving the content of the src/webrtc directory up
to the src/ directory.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iac59c5b51b950f174119565bac87955a7994bc38
Reviewed-on: https://webrtc-review.googlesource.com/1560
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19845}
2017-09-15 04:25:06 +00:00
Renamed from webrtc/modules/audio_processing/aec3/erle_estimator_unittest.cc (Browse further)
