It holds the same information as codecType, but in different format.
Bug: webrtc:8830
Change-Id: Ia83e2dff4fd9a5ddb489501b7a1fe80759fa4218
Reviewed-on: https://webrtc-review.googlesource.com/56100
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22307}
This fixes the issue when Init() with correct codec settings fails
because preceding Init() was called with wrong settings.
Bug: webrtc:8969
Change-Id: I50e618af6266ef593942fda27839c7c01e8717ae
Reviewed-on: https://webrtc-review.googlesource.com/59382
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22271}
Overriding implementations of VideoEncoder::GetScalingSettings that
want to enable quality scaling must now provide the thresholds.
Bug: webrtc:8830
Change-Id: I75c47cb56ac1b9cf77401684980b3167e485f51c
Reviewed-on: https://webrtc-review.googlesource.com/46622
Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22172}
This is a reland of 8fb22e71ee.
Original change's description:
> Updates tests for turning simulcast streams on/off.
>
> Due to libvpx we were restricted to always turning the low simulcast
> stream on, or else the encoder would always label the active streams'
> encoded frames as key frames. Now that libvpx has been updated and
> rolled in, this change updates tests to reflect that it is working.
>
> Bug: webrtc:8653
> Change-Id: I065ef817ace2292605e27e135802cf4a3e90647e
> Reviewed-on: https://webrtc-review.googlesource.com/46340
> Reviewed-by: Taylor Brandstetter <deadbeef@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Commit-Queue: Seth Hampson <shampson@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#21831}
TBR=sprang@webrtc.org
Bug: webrtc:8653
Change-Id: I32fa92649f3ff40b1e364f880040e52ae698f74d
Reviewed-on: https://webrtc-review.googlesource.com/46860
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Taylor Brandstetter <deadbeef@webrtc.org>
Commit-Queue: Seth Hampson <shampson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21918}
The VideoCodecTest class is a fixture base class for the
libvpx-VP8, libvpx-VP9, and OpenH264 unit tests. It is unrelated
to the VideoProcessor tests, which we colloquially refer to as
the "codec test".
This rename is thus to reduce this confusion. It should have no
functional impact.
Bug: webrtc:8448
Change-Id: If73443bda5df0f29a71ce6ce069ac128795ff0ad
Reviewed-on: https://webrtc-review.googlesource.com/47160
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21867}
This reverts commit 8fb22e71ee.
Reason for revert: breaks downstream projects
Original change's description:
> Updates tests for turning simulcast streams on/off.
>
> Due to libvpx we were restricted to always turning the low simulcast
> stream on, or else the encoder would always label the active streams'
> encoded frames as key frames. Now that libvpx has been updated and
> rolled in, this change updates tests to reflect that it is working.
>
> Bug: webrtc:8653
> Change-Id: I065ef817ace2292605e27e135802cf4a3e90647e
> Reviewed-on: https://webrtc-review.googlesource.com/46340
> Reviewed-by: Taylor Brandstetter <deadbeef@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Commit-Queue: Seth Hampson <shampson@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#21831}
TBR=deadbeef@webrtc.org,sprang@webrtc.org,shampson@webrtc.org
Change-Id: If14074a7fc56c83b75584d8e9a6a913a40514bad
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:8653
Reviewed-on: https://webrtc-review.googlesource.com/46840
Reviewed-by: Oleh Prypin <oprypin@webrtc.org>
Commit-Queue: Oleh Prypin <oprypin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21832}
Due to libvpx we were restricted to always turning the low simulcast
stream on, or else the encoder would always label the active streams'
encoded frames as key frames. Now that libvpx has been updated and
rolled in, this change updates tests to reflect that it is working.
Bug: webrtc:8653
Change-Id: I065ef817ace2292605e27e135802cf4a3e90647e
Reviewed-on: https://webrtc-review.googlesource.com/46340
Reviewed-by: Taylor Brandstetter <deadbeef@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Seth Hampson <shampson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21831}
This is in preparation for
https://webrtc-review.googlesource.com/c/src/+/36340
With these changes we can avoid some strange #ifdefs in the code
that uses temporal layers.
Bug: webrtc:7925
Change-Id: I472210738ccc9f73812b8863951befeabec56f15
Reviewed-on: https://webrtc-review.googlesource.com/41280
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Anders Carlsson <andersc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21759}
Try to use frame timestamps first if they look reasonable, otherwise
use realtime clock.
Also, lower limit from 90% of target to 85%.
Bug: webrtc:4172, chromium:802290
Change-Id: Iad489be7c7cf637345be4795e5089936ab9fab07
Reviewed-on: https://webrtc-review.googlesource.com/41041
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21729}
This is a reland of 18c4261339
Original change's description:
> Enables/disables simulcast streams by allocating a bitrate of 0 to the spatial layer.
>
> Creates VideoStreams & VideoCodec.simulcastStreams with an active field, and then allocates 0 bitrate to simulcast streams that are inactive. This turns off the encoder for specific simulcast streams.
>
> Bug: webrtc:8653
> Change-Id: Id93b03dcd8d1191a7d3300bd77882c8af96ee469
> Reviewed-on: https://webrtc-review.googlesource.com/37740
> Reviewed-by: Stefan Holmer <stefan@webrtc.org>
> Reviewed-by: Taylor Brandstetter <deadbeef@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Commit-Queue: Seth Hampson <shampson@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#21646}
TBR=sprang@webrtc.org,stefan@webrtc.org,deadbeef@webrtc.org
Bug: webrtc:8630
Change-Id: Ib3df6f9b7158bff362a7ec66fc57e368682c5846
Reviewed-on: https://webrtc-review.googlesource.com/40980
Reviewed-by: Seth Hampson <shampson@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Seth Hampson <shampson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21688}
This reverts commit 18c4261339.
Reason for revert: Broke internal tests
Original change's description:
> Enables/disables simulcast streams by allocating a bitrate of 0 to the spatial layer.
>
> Creates VideoStreams & VideoCodec.simulcastStreams with an active field, and then allocates 0 bitrate to simulcast streams that are inactive. This turns off the encoder for specific simulcast streams.
>
> Bug: webrtc:8653
> Change-Id: Id93b03dcd8d1191a7d3300bd77882c8af96ee469
> Reviewed-on: https://webrtc-review.googlesource.com/37740
> Reviewed-by: Stefan Holmer <stefan@webrtc.org>
> Reviewed-by: Taylor Brandstetter <deadbeef@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Commit-Queue: Seth Hampson <shampson@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#21646}
TBR=deadbeef@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,shampson@webrtc.org
Change-Id: I0aeb743cbd2e8d564aa732c937587c25a4c49b09
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:8653
Reviewed-on: https://webrtc-review.googlesource.com/39883
Reviewed-by: Lu Liu <lliuu@webrtc.org>
Commit-Queue: Lu Liu <lliuu@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21647}
Creates VideoStreams & VideoCodec.simulcastStreams with an active field, and then allocates 0 bitrate to simulcast streams that are inactive. This turns off the encoder for specific simulcast streams.
Bug: webrtc:8653
Change-Id: Id93b03dcd8d1191a7d3300bd77882c8af96ee469
Reviewed-on: https://webrtc-review.googlesource.com/37740
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Taylor Brandstetter <deadbeef@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Seth Hampson <shampson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21646}
This is a reland of https://webrtc-review.googlesource.com/34380
The main problem with that CL was that we used frame timestamps as basis
for frame dropping, but those might not be continuous or even populated
in some circumstances.
Additionally, I found that the bitrate was off since the encoder does
not not take the dropped frames into account, so if we drop every other
frame continiusoly, the bitrate sent will be around half of the target.
Patch set 1 is the original CL, subsequent patch sets cotains fixes.
Bug: webrtc:4172
Change-Id: I8ec8dddcebf4ce44f28dd9055cf9c46bbd68e4a6
Reviewed-on: https://webrtc-review.googlesource.com/39201
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21601}
This reverts commit 28a06b16cc.
Reason for revert: Causes some unexpected perf changes.
Original change's description:
> Smoother frame dropping when screenshare_layers limits fps
>
> Currently, when input fps is higher than the configured target fps in
> screenshare_layers, we drop frames with the help of a rate tracker using
> a one second sliding window. This is not optimal.
> For instance, given a 5fps limit and a 30fps capturer, the window will
> not be saturated until we have added the first 5 frames. Then we will
> drop all frames until the oldest one drops out, at which point we can
> immediately fill it's place. This results in quick 5 frame bursts every
> second.
>
> In addition to rate tracker, also set a limit on minimum interval
> required between input frames, based on target frame rate.
>
> Bug: webrtc:4172
> Change-Id: I49f0abf4d549673cc6b3fafe580b529ea3feaf57
> Reviewed-on: https://webrtc-review.googlesource.com/34380
> Commit-Queue: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#21325}
TBR=ilnik@webrtc.org,sprang@webrtc.org
Change-Id: I7ca5b0c847310dbb11dce28773082eac946c0ba4
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:4172
Reviewed-on: https://webrtc-review.googlesource.com/34780
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21354}
Currently, when input fps is higher than the configured target fps in
screenshare_layers, we drop frames with the help of a rate tracker using
a one second sliding window. This is not optimal.
For instance, given a 5fps limit and a 30fps capturer, the window will
not be saturated until we have added the first 5 frames. Then we will
drop all frames until the oldest one drops out, at which point we can
immediately fill it's place. This results in quick 5 frame bursts every
second.
In addition to rate tracker, also set a limit on minimum interval
required between input frames, based on target frame rate.
Bug: webrtc:4172
Change-Id: I49f0abf4d549673cc6b3fafe580b529ea3feaf57
Reviewed-on: https://webrtc-review.googlesource.com/34380
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21325}
TBR=brandtr@webrtc.org,stefan@webrtc.org
Currently |bw_resolutions_disabled| is set per VP8EncoderImpl instance and reported via
OnEncodedImage callback.
Instead move logic to SendStatisticsProxy to determine if resolution is bw limited or not based
on info that is reported to SendStatisticsProxy::OnEncodedImage.
Bug: webrtc:8643
Change-Id: I553cea30dcda34b753b5224f15094a1b7b70a750
Reviewed-on: https://webrtc-review.googlesource.com/31460
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Commit-Queue: Åsa Persson <asapersson@webrtc.org>
Cr-Original-Commit-Position: refs/heads/master@{#21249}
Reviewed-on: https://webrtc-review.googlesource.com/33360
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21319}
This reverts commit 59283e4c66.
Reason for revert: This CL is preventing rolls into Chromium because it fails to compile with MSVC.
Sample error log:
[13258/43857] CXX obj/third_party/webrtc/video/video/send_statistics_proxy.obj
FAILED: obj/third_party/webrtc/video/video/send_statistics_proxy.obj
ninja -t msvc -e environment.x64 -- E:\b\c\goma_client/gomacc.exe "e:\b\c\win_toolchain\vs_files\a9e1098bba66d2acccc377d5ee81265910f29272\vc\tools\msvc\14.11.25503\bin\hostx64\x64/cl.exe" /nologo /showIncludes @obj/third_party/webrtc/video/video/send_statistics_proxy.obj.rsp /c ../../third_party/webrtc/video/send_statistics_proxy.cc /Foobj/third_party/webrtc/video/video/send_statistics_proxy.obj /Fd"obj/third_party/webrtc/video/video_cc.pdb"
../../third_party/webrtc/video/send_statistics_proxy.cc(217): error C2220: warning treated as error - no 'object' file generated
../../third_party/webrtc/video/send_statistics_proxy.cc(217): warning C4267: 'initializing': conversion from 'size_t' to 'int', possible loss of data
../../third_party/webrtc/video/send_statistics_proxy.cc(632): warning C4267: '=': conversion from 'size_t' to 'uint32_t', possible loss of data
Original change's description:
> googBandwidthLimitedResolution stat is not always set depending on configuration.
>
> Currently |bw_resolutions_disabled| is set per VP8EncoderImpl instance and reported via
> OnEncodedImage callback.
>
> Instead move logic to SendStatisticsProxy to determine if resolution is bw limited or not based
> on info that is reported to SendStatisticsProxy::OnEncodedImage.
>
> Bug: webrtc:8643
> Change-Id: I6c148e3507a0f04a793775b9f84ce54028b64d0f
> Reviewed-on: https://webrtc-review.googlesource.com/31460
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Reviewed-by: Stefan Holmer <stefan@webrtc.org>
> Commit-Queue: Åsa Persson <asapersson@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#21249}
TBR=brandtr@webrtc.org,asapersson@webrtc.org,stefan@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:8643
Change-Id: Ib9ef55b8894ea72236a5dc1e9a839adecd401afb
Reviewed-on: https://webrtc-review.googlesource.com/33100
Reviewed-by: Guido Urdaneta <guidou@webrtc.org>
Commit-Queue: Guido Urdaneta <guidou@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21284}
Currently |bw_resolutions_disabled| is set per VP8EncoderImpl instance and reported via
OnEncodedImage callback.
Instead move logic to SendStatisticsProxy to determine if resolution is bw limited or not based
on info that is reported to SendStatisticsProxy::OnEncodedImage.
Bug: webrtc:8643
Change-Id: I6c148e3507a0f04a793775b9f84ce54028b64d0f
Reviewed-on: https://webrtc-review.googlesource.com/31460
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Commit-Queue: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21249}
Using fully qualified paths to include libyuv headers allows WebRTC to
avoid to rely on the //third_party/libyuv:libyuv_config target to
set the -I compiler flag.
Today some WebRTC targets depend on //third_party/libyuv only to
include //third_party/libyuv:libyuv_config but with fully qualified
paths this should not be needed anymore.
A follow-up CL will remove //third_party/libyuv from some targets that
don't need it because they are not including libyuv headers.
Bug: webrtc:8605
Change-Id: Icec707ca761aaf2ea8088e7f7a05ddde0de2619a
No-Try: True
Reviewed-on: https://webrtc-review.googlesource.com/28220
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Magnus Flodman <mflodman@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21209}
Changes places where we explicitly construct an Optional to instead use
nullopt or the requisite value type only.
This CL was uploaded by git cl split.
Bug: None
Change-Id: Iedebf4dc56a973306e7d7e7649525879808dc72b
Reviewed-on: https://webrtc-review.googlesource.com/23578
Commit-Queue: Oskar Sundbom <ossu@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20878}
Now decision between using SimulcastEncoderAdapter and using VP8 encoder
is postponed before codec is initialized for VP8 internal codecs. This is done
be new VP8EncoderProxy class. New error code for codec initialization is used
to signal that simulcast parameters are not supported.
Bug: webrtc:7925
Change-Id: I3a82c21bf5dfaaa7fa25350986830523f02c39d8
Reviewed-on: https://webrtc-review.googlesource.com/13980
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20419}
Since WEBRTC_ANDROID is defined by WebRTC while ANDROID is defined by
Chromium we should stop using ANDROID in WebRTC source code.
Bug: webrtc:8400
Change-Id: I1d59caaabd8af2423e86476b72e0e9185e6c7a3a
No-Try: True
Reviewed-on: https://webrtc-review.googlesource.com/10805
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20306}
This is expected to result in a slight loss of overall quality, but
should offset by quicker switching between temporal layers with flaky
connections.
Bug: webrtc:7694
Change-Id: Ib605802bb59f12773652324ac66cdf4774ae6bb6
Reviewed-on: https://webrtc-review.googlesource.com/6881
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20160}
All frames are checked against hard-coded dependency graph
using new helper class. It's invoked in RTC_DCHECK(). Only
DefaultTemporalLayers are fully implemented in this CL, checker
for ScreenshareLayers is not doing anything for now.
Bug: none
Change-Id: I3ec017176d8c25f7572c8f161e52f2ebfac8220f
Reviewed-on: https://webrtc-review.googlesource.com/3740
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20066}
Now that we have moved WebRTC from src/webrtc to src/, common_types.h
and typedefs.h are triggering a cpplint error.
The cpplint complaint is:
Include the directory when naming .h files [build/include] [4]
This CL disables the error but we have to remove these two headers
from the root directory.
NOPRESUBMIT=true
Bug: webrtc:5876
Change-Id: I08e1b69aadcc4b28ab83bf25e3819d135d41d333
Reviewed-on: https://webrtc-review.googlesource.com/1577
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@google.com>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19859}
In https://webrtc-review.googlesource.com/c/src/+/1560 we moved WebRTC
from src/webrtc to src/ (in order to preserve an healthy git history).
This CL takes care of fixing header guards, #include paths, etc...
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iea91618212bee0af16aa3f05071eab8f93706578
Reviewed-on: https://webrtc-review.googlesource.com/1561
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19846}
In order to eliminate the WebRTC Subtree mirror in Chromium,
WebRTC is moving the content of the src/webrtc directory up
to the src/ directory.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iac59c5b51b950f174119565bac87955a7994bc38
Reviewed-on: https://webrtc-review.googlesource.com/1560
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19845}
Making a long chain of interface changes to route a CodecSpecificInfo
struct from the video encoder function to the RTPSenderVideo. This
will be used to convey information needed by the RTP packetizer when
building the RTP headers.
Review URL: http://webrtc-codereview.appspot.com/56001
git-svn-id: http://webrtc.googlecode.com/svn/trunk@140 4adac7df-926f-26a2-2b94-8c16560cd09d
Use get/set reference frames to realize a decoder cloning. Must
also inject the latest keyframe. Note: this CL does not work with
the Bali release of libvpx. Must apply the bug fix in commit fbea3728.
Review URL: http://webrtc-codereview.appspot.com/32004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@67 4adac7df-926f-26a2-2b94-8c16560cd09d
The Reset function was modified so that the encoder is destroyed
and recreated on reset. Initialization of the encoder and setting
of the encoder speed is now done in a private method, to avoid
code duplication. (It is used both in InitEncode and in Reset.)
This change is needed to make the unit tests pass with newer
versions of libvpx.
Review URL: http://webrtc-codereview.appspot.com/33004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@56 4adac7df-926f-26a2-2b94-8c16560cd09d
