The playout modes other than Normal have not been reachable for a long
time, other than through tests. It is time to deprecate them.
The only meaningful use was that Fax mode was sometimes set from
tests, in order to avoid time-stretching operations (accelerate and
pre-emptive expand) from messing with the test results. With this CL,
a new config is added instead, which lets the user specify exactly
this: don't do time-stretching.
As a result of Fax and Off modes being removed, the following code
clean-up was done:
- Fold DecisionLogicNormal into DecisionLogic.
- Remove AudioRepetition and AlternativePlc operations, since they can
no longer be reached.
Bug: webrtc:9421
Change-Id: I651458e9c1931a99f3b07e242817d303bac119df
Reviewed-on: https://webrtc-review.googlesource.com/84123
Commit-Queue: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23704}
This is a no-op change because rtc::Optional is an alias to absl::optional
This CL generated by running script with parameter 'modules/audio_coding'
find $@ -type f \( -name \*.h -o -name \*.cc \) \
-exec sed -i 's|rtc::Optional|absl::optional|g' {} \+ \
-exec sed -i 's|rtc::nullopt|absl::nullopt|g' {} \+ \
-exec sed -i 's|#include "api/optional.h"|#include "absl/types/optional.h"|' {} \+
find $@ -type f -name BUILD.gn \
-exec sed -r -i 's|"[\./api]*:optional"|"//third_party/abseil-cpp/absl/types:optional"|' {} \+;
git cl format
Bug: webrtc:9078
Change-Id: Ic980ee605148fdb160666d4aa03cc87175e48fe8
Reviewed-on: https://webrtc-review.googlesource.com/84130
Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23659}
NetEq tapers down the audio produced through loss concealment when the
expansion has been going on for some time. When the audio packets starts
coming in again, there is a ramp-up that happens. This ramp-up could
before this change extend over more than one 10 ms block, which made
keeping track of the scaling factor necessary. With this change, we make
this ramp-up quicker in the rare cases when it lasted more than 10 ms,
so that it always ramps up to 100% within one block. This way, we can
remove the mute_factor_array.
This change breaks bit-exactness, but careful listening could not reveal
an audible difference.
This change is a part of a larger refactoring of NetEq's PLC code.
Bug: webrtc:9180
Change-Id: I4c513ce3ed8d66f9beec2abfb1f0c7ffaac7a21e
Reviewed-on: https://webrtc-review.googlesource.com/77180
Commit-Queue: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23342}
NetEq was (up until this CL) capable of fading over to generating a
constant background noise when voice expansion had lasted too long.
However, the code has for a really long time only ever used the "off"
mode, which meant that long expansions are faded down to complete
silence (only zeros), i.e., background noise fill was not used.
Removing the other two modes ("on" and "fade") simplifies the code.
Bug: webrtc:9180
Change-Id: Ia2d46960208f3d75c9659ad3f027c52e5ecfb6b0
Reviewed-on: https://webrtc-review.googlesource.com/71485
Commit-Queue: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22969}
- Directly include api/audio/audio_frame.h everywhere AudioFrame is used.
- This *will* remove transient dependencies on libjpeg and a bunch of other things from the e.g. APM.
- audio_frame.h still included from module_common_types.h for backwards compatibility with clients.
Bug: webrtc:9139, webrtc:7504
Change-Id: Id96f9268c01667fbcc29a01f5c1dd25a37836897
Reviewed-on: https://webrtc-review.googlesource.com/62464
Commit-Queue: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22845}
These two new histograms relate to the packet-loss concealment that
happens when audio packets are lost or late for decoding, and the
NetEq must resort to extrapolating audio from the previously
decoded data.
Bug: webrtc:9126
Change-Id: I99cc97e653169fb742da0092653ab99fd10e5d7b
Reviewed-on: https://webrtc-review.googlesource.com/67861
Commit-Queue: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22812}
This change makes the fix for too long delays during Opus DTX periods
permanent. The fix has up until now been under an experiment, named
WebRTC-NetEqOpusDtxDelayFix.
Bug: webrtc:8488,chromium:780849
Change-Id: I006abb67f96d9d7880bf2215d7d6b52db6cbbfbc
Reviewed-on: https://webrtc-review.googlesource.com/44420
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21786}
The UMA metric will log the same information that goes into the
googPreferredJitterBufferMs stat.
Bug: webrtc:8488
Change-Id: I4e4e1e362dd42377105d52d2c4cd49c1ecb1a90d
Reviewed-on: https://webrtc-review.googlesource.com/26740
Reviewed-by: Henrik Andreassson <henrika@webrtc.org>
Commit-Queue: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20923}
The length of the generated comfort noise is measured with a
counter. A bug in the implementation caused the counter to be reset
not only when a new packet was decoded, but also when NetEq asked the
decoder for more comfort noise without giving it a new packet to
decode. This means that the counter was reset once every 20 ms (in the
case of Opus), and it would never match the gap in timestamps that is
the exit criterion for CNG. This would have resulted in perpetual CNG,
but there is a stop-gap in NetEq. If the buffer level exceeds 4 times
the target level, CNG mode is exited anyway. This is what happens at
the end of every silence period.
With this CL, the bug should be fixed. The fix is wrapped in an
experiment, to allow verifying the fix and the impact of it with real
world data.
Bug: webrtc:8488
Change-Id: Idfc24df780eb2c55dbf08de840e6644e8557a0af
Reviewed-on: https://webrtc-review.googlesource.com/18181
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20551}
Now that we have moved WebRTC from src/webrtc to src/, common_types.h
and typedefs.h are triggering a cpplint error.
The cpplint complaint is:
Include the directory when naming .h files [build/include] [4]
This CL disables the error but we have to remove these two headers
from the root directory.
NOPRESUBMIT=true
Bug: webrtc:5876
Change-Id: I08e1b69aadcc4b28ab83bf25e3819d135d41d333
Reviewed-on: https://webrtc-review.googlesource.com/1577
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@google.com>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19859}
In https://webrtc-review.googlesource.com/c/src/+/1560 we moved WebRTC
from src/webrtc to src/ (in order to preserve an healthy git history).
This CL takes care of fixing header guards, #include paths, etc...
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iea91618212bee0af16aa3f05071eab8f93706578
Reviewed-on: https://webrtc-review.googlesource.com/1561
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19846}
In order to eliminate the WebRTC Subtree mirror in Chromium,
WebRTC is moving the content of the src/webrtc directory up
to the src/ directory.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iac59c5b51b950f174119565bac87955a7994bc38
Reviewed-on: https://webrtc-review.googlesource.com/1560
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19845}
2017-09-15 04:25:06 +00:00
Renamed from webrtc/modules/audio_coding/neteq/neteq_impl.h (Browse further)
