This CL contains the first step of adding multi-channel support to the
echo subtractor.
The CL is bitexact for the mono case.
Bug: webrtc:10913
Change-Id: I10647b45c692bc001407afc6ff00e26a3e2cffaa
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/154356
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29303}
Simplifying the use of signal transition and removing unused code.
Bug: webrtc:8671
Change-Id: I0b845405727936b2fa7df7c92ad2e83bea3bc823
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/154348
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29298}
Suppression filter is extended to support the synthesis
of multiple channels. This CL is also a major clean-up of ApplyGain.
The CL has been tested for bit-exactness for single channel output.
Bug: webrtc:10913
Change-Id: I1319f127981552e17dec66701a248d34dcf0e563
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/154341
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29284}
Echo remover processes all microphone signals. Suppression gains are
computed separately for each capture signal. The minimum gains determine
the final suppression gains applied.
Only the first channel is synthesized. A follow-up CL will add the
synthesis of the remaining channels.
Bug: webrtc:10913
Change-Id: Ife7e74c9a9c6c208fca3992e3cfa840b6b7afcfa
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153526
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29269}
Currently, APM fakes multichannel in two ways:
- With injected AECs, capture processing is only performed on the left
channel. The result is copied into the other channels.
- With multichannel render audio, all channels are mixed into one
before analysing.
This CL adds a flag to disable these behaviors, ensuring proper
multichannel processing happens throughout the APM pipeline.
Adds killswitches to separately disable render / capture multichannel.
Additionally - AEC3 currently crashes when running with multichannel.
This CL adds the missing pieces to at least have it run without
triggering any DCHECKS, including making the high pass filter properly
handle multichannel.
Bug: webrtc:10913, webrtc:10907
Change-Id: I38795bf8f312b959fcc816a056fba2c68d4e424d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152483
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29248}
This CL allows the user to have more refined control over what band
splitting-scheme is used inside the audio processing module.
Bug: webrtc:6181
Change-Id: I236c3b1f96ab80cc4ffb8c39c045c034764567a1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152480
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29189}
In this CL:
- Render signal analyzer considers a frequency bin a narrow band
(peak) if any channel exhibits narrowband (-peak) behavior.
- The unit tests have to fill frames with noise because small
inaccuracies in the FFT spectrum lead to consistent "narrow bands"
despite spectrum being essentially flat.
Bug: webrtc:10913
Change-Id: I8fa181412c0ee1beeacfda37ffef18251d5f0cd7
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151912
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29176}
This CL introduces the handling of multiple microphone channels in
the EchoRemover layer.
The implementation is done such as to support an arbitrary number of
channels in a way that balances stack and heap-space usage.
Bug: webrtc:10913
Change-Id: I475369de6c463b8fe2d7e53799d7322eefb6938f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151647
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29140}
Multichannel signals are downmixed to mono before decimation and
delay estimation. This is useful when not all channels play
audio content. The feature can be toggled in the AEC3 configuration.
Bug: webrtc:10913
Change-Id: I7d40edf7732bb51fec69e7f3ca063d821c5069c4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151762
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29126}
This CL reduces the complexity and heap usage of the adaptive filter
in AEC3 by avoiding to compute these for the shadow
filter. In particular it
-Moves to compute the ERL, frequency response and impulse response
on an on-demand basis.
-Stores the ERL, frequency response and impulse response outside
of the adaptive filter.
All the changes have been tested for bitexactness on a sizeable
amount of recordings.
Bug: webrtc:10913
Change-Id: If83c236a6e3f2e489be129b9ebf6143a72f521d1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151138
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29081}
All channels are populated by RenderDelayBuffer. but all other
dependent modules are hardcoded to do their regular mono processing
on the first channel.
Bug: webrtc:10913
Tested: Bitexactness on a large set of aecdumps
Change-Id: I11d11aa0ad3da0f244c0ec020d2c9f0f4a735834
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151640
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29079}
The VectorBuffer and MatrixBuffer names are too generic for their use case.
Bug: webrtc:10913
Change-Id: Ideecd0d27e07487a85a61dc6474e69733d07dcd6
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151602
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29076}
All dependent modules are hardcoded to do their regular mono processing on the first channel.
This _almost_ makes RenderBuffer multi-channel: FftData is still only mono.
Bug: webrtc:10913
Change-Id: Id5cc34dbabfe59e1cc72a9675dc7979794e870ed
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151139
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29074}
This CL propagates the number of render and capture channels into
the echo subtractor and the adaptive filters.
Bug: webrtc:10913
Change-Id: I5ffff24ff64b7cc0f262bf008b34b6dfca1e78f9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151300
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29059}
This is a reland of a66395e72f
Original change's description:
> Reland "Add core multi-channel pipeline in AEC3 This CL adds basic the basic pipeline to support multi-channel processing in AEC3."
>
> This is a reland of f3a197e553
>
> Original change's description:
> > Add core multi-channel pipeline in AEC3
> > This CL adds basic the basic pipeline to support multi-channel
> > processing in AEC3.
> >
> > Apart from that, it removes the 8 kHz processing support in several
> > places of the AEC3 code.
> >
> > Bug: webrtc:10913
> > Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> > Commit-Queue: Per Åhgren <peah@webrtc.org>
> > Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#29017}
>
> Bug: webrtc:10913
> Change-Id: Ifc4b13bd994cfd22dca8f8755fa5700617cc379d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151124
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29034}
Bug: webrtc:10913
Change-Id: Id8da5666df8c86f290c73ad5dc9958199f1a7ebe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151127
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29042}
This is a reland of f3a197e553
Original change's description:
> Add core multi-channel pipeline in AEC3
> This CL adds basic the basic pipeline to support multi-channel
> processing in AEC3.
>
> Apart from that, it removes the 8 kHz processing support in several
> places of the AEC3 code.
>
> Bug: webrtc:10913
> Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29017}
Bug: webrtc:10913
Change-Id: Ifc4b13bd994cfd22dca8f8755fa5700617cc379d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151124
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29034}
This reverts commit f3a197e553.
Reason for revert: Speculative revert, as this may'be broken some build bots
Original change's description:
> Add core multi-channel pipeline in AEC3
> This CL adds basic the basic pipeline to support multi-channel
> processing in AEC3.
>
> Apart from that, it removes the 8 kHz processing support in several
> places of the AEC3 code.
>
> Bug: webrtc:10913
> Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29017}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: I877d2993b9ccf024bd1d57bca1513c3e24d0bed3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10913
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150940
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29022}
This CL adds basic the basic pipeline to support multi-channel
processing in AEC3.
Apart from that, it removes the 8 kHz processing support in several
places of the AEC3 code.
Bug: webrtc:10913
Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29017}
This CL increases the maximum supported sample rate so that all rates
up to 384000 Hz are handled.
The CL also adds tests that verifies that APM works as intended for
different combinations of number of channels and sample rates.
Bug: webrtc:10882
Change-Id: I98738e33ac21413ae00fec10bb43b8796ae2078c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150532
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29014}
This CL corrects the way the audio processing module handles sample rates that
don't allow partitioning the data into evenly sized 10 ms chunks, examples
being 22050 Hz and 11025 Hz.
Bug: webrtc:10882
Change-Id: I35d738f8a0e1debc443fe5d473c0d666a7ba8d98
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150526
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28953}
This CL removes and replaces the legacy fixed-point high-pass filter in
APM with the floating point high-pass filter in AEC3.
Bug: webrtc:10907
Change-Id: I88cf8f622ab139e4ffa97f89a72425aa3becfc58
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150103
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28950}
This is a reland of b7b8e30cb4
Original change's description:
> Reland Process 8 kHz audio as 16 kHz internally of the audio processing module
>
> This CL relands the code from the CL "Process 8 kHz audio as 16 kHz internally
> of the audio processing module" which by mistake was reverted via a rebase in
> another CL.
>
> The CL changes the behavior of APM for 8 kHz so that it is internally
> processed as 16 kHz.
>
> Bug: webrtc:10863
> Change-Id: I32a57b2d279c2134125667c19b09cfda381a33c3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150221
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28944}
Bug: webrtc:10863
Change-Id: Ic626b99b099248f0d8a677dc4cfe1505e14ae7cd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150330
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28949}
This reverts commit b7b8e30cb4.
Reason for revert: Broke ApmTest.Process test in internal iOS waterfall
Original change's description:
> Reland Process 8 kHz audio as 16 kHz internally of the audio processing module
>
> This CL relands the code from the CL "Process 8 kHz audio as 16 kHz internally
> of the audio processing module" which by mistake was reverted via a rebase in
> another CL.
>
> The CL changes the behavior of APM for 8 kHz so that it is internally
> processed as 16 kHz.
>
> Bug: webrtc:10863
> Change-Id: I32a57b2d279c2134125667c19b09cfda381a33c3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150221
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28944}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: Ia49e07b0c25c49da646917516e317f1d57cc4e84
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10863
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150326
Reviewed-by: Artem Titarenko <artit@webrtc.org>
Commit-Queue: Artem Titarenko <artit@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28948}
This CL relands the code from the CL "Process 8 kHz audio as 16 kHz internally
of the audio processing module" which by mistake was reverted via a rebase in
another CL.
The CL changes the behavior of APM for 8 kHz so that it is internally
processed as 16 kHz.
Bug: webrtc:10863
Change-Id: I32a57b2d279c2134125667c19b09cfda381a33c3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150221
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28944}
This is a reland of 81c0cf287c
Original change's description:
> Simplification and refactoring of the AudioBuffer code
>
> This CL performs a major refactoring and simplification
> of the AudioBuffer code that.
> -Removes 7 of the 9 internal buffers of the AudioBuffer.
> -Avoids the implicit copying required to keep the
> internal buffers in sync.
> -Removes all code relating to handling of fixed-point
> sample data in the AudioBuffer.
> -Changes the naming of the class methods to reflect
> that only floating point is handled.
> -Corrects some bugs in the code.
> -Extends the handling of internal downmixing to be
> more generic.
>
> Bug: webrtc:10882
> Change-Id: I12c8af156fbe366b154744a0a1b3d926bf7be572
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149828
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28928}
Bug: webrtc:10882
Change-Id: I2ddf327e80a03468c41662ae63c619ff34f2363a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150101
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28938}
This reverts commit 81c0cf287c.
Reason for revert: internal test failures
Original change's description:
> Simplification and refactoring of the AudioBuffer code
>
> This CL performs a major refactoring and simplification
> of the AudioBuffer code that.
> -Removes 7 of the 9 internal buffers of the AudioBuffer.
> -Avoids the implicit copying required to keep the
> internal buffers in sync.
> -Removes all code relating to handling of fixed-point
> sample data in the AudioBuffer.
> -Changes the naming of the class methods to reflect
> that only floating point is handled.
> -Corrects some bugs in the code.
> -Extends the handling of internal downmixing to be
> more generic.
>
> Bug: webrtc:10882
> Change-Id: I12c8af156fbe366b154744a0a1b3d926bf7be572
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149828
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28928}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: I2729e3ad24b3a9b40b368b84cb565c859e79b51e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10882
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150084
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Commit-Queue: Steve Anton <steveanton@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28931}
This CL changes the behavior of APM for 8 kHz so that it is internally
processed as 16 kHz.
Bug: webrtc:10863
Change-Id: Ie17de6551c6e984b60534820374a49ca298f06ce
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/148800
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28929}
This CL performs a major refactoring and simplification
of the AudioBuffer code that.
-Removes 7 of the 9 internal buffers of the AudioBuffer.
-Avoids the implicit copying required to keep the
internal buffers in sync.
-Removes all code relating to handling of fixed-point
sample data in the AudioBuffer.
-Changes the naming of the class methods to reflect
that only floating point is handled.
-Corrects some bugs in the code.
-Extends the handling of internal downmixing to be
more generic.
Bug: webrtc:10882
Change-Id: I12c8af156fbe366b154744a0a1b3d926bf7be572
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149828
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28928}
This CL is a no-op since rtc_use_lto is always false and in general
such change should probably be implemented in
//build/config/compiler/BUILD.gn.
Bug: chromium:408997
Change-Id: Id37d3181e66e699f8cd535aee1af7609352a7259
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149833
Reviewed-by: Niels Moller <nisse@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28919}
This CL removes all external access to the integer sample data in the
AudioBuffer class. It also removes the API in AudioBuffer that provides this.
The purpose of this is to pave the way for removing the sample
duplicating and implicit conversions between integer and floating point
sample formats which is done inside the AudioBuffer.
Bug: webrtc:10882
Change-Id: I1438b691bcef98278aef8e3c63624c367c2d12e9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149162
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28912}
This CL changes the way that values are converted
between fixed and floating point to
-Avoid the former asymmetric conversion causing
nonlinear distortions.
-Reduce the complexity.
In contrast to the initial CL, the DCHECKS on the incoming sample
range was changed to limiting.
Bug: webrtc:6594
Change-Id: I8218dfd5c45388ad5aac61be453d2f28725a2475
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132783
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Original-Commit-Position: refs/heads/master@{#28867}
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149169
Cr-Commit-Position: refs/heads/master@{#28897}
This change fixes a bug where the initial delay could be set incorrectly.
Bug: webrtc:10896
Change-Id: I66b2234b69c46639488f4561e973384001230861
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149820
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28894}
This reverts commit 67e43c8b95.
Reason for revert: speculative revert since we see failing bots on Android after this change
https://ci.chromium.org/p/chromium/builders/webrtc.fyi/WebRTC%20Chromium%20FYI%20Android%20Tests%20%28dbg%29%20%28K%20Nexus5%29/4124
Original change's description:
> Correct conversion between float and fixed formats
>
> This CL changes the way that values are converted
> between fixed and floating point to
> -Avoid the former asymmetric conversion causing
> nonlinear distortions.
> -Reduce the complexity.
>
> Bug: webrtc:6594
> Change-Id: I64d0cc31c5d16f397686a59a062cfbc4b336d94d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132783
> Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28867}
TBR=henrik.lundin@webrtc.org,gustaf@webrtc.org,peah@webrtc.org
Change-Id: Id828a09de7075e48556fe2d0beba7a0c6ec227f6
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:6594
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149165
Reviewed-by: Henrik Andreassson <henrika@webrtc.org>
Commit-Queue: Henrik Andreassson <henrika@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28872}
This CL changes the way that values are converted
between fixed and floating point to
-Avoid the former asymmetric conversion causing
nonlinear distortions.
-Reduce the complexity.
Bug: webrtc:6594
Change-Id: I64d0cc31c5d16f397686a59a062cfbc4b336d94d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132783
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28867}
This CL moves/removes all code from the AudioBuffer that:
-Is not directly handling audio data (e.g., keytaps, VAD descisions).
-Is caching aggregated versions of the rest of the audio data.
-Is not used (or only used in testing)
Bug: webrtc:10882
Change-Id: I737deb3f692748eff30f46ad806b2c6f6292802c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149072
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28866}
This CL adds the following options:
pass an input AEC dump as a string (currently, the tool can only accept a path to an AEC dump file)
write the processed capture samples to a given vector
Bug: webrtc:10808
Change-Id: I02863c97ec3cd8c03ade2ea8521836f2e7417050
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/145208
Commit-Queue: Sonia-Florina Horchidan <soniahorchidan@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28826}
This change reduces the level of several non-critical log messages in
order to reduce log spamming.
Bug: webrtc:8671
Change-Id: I6faae7a2ae4eeafd18c2770208485a75ad946e20
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/148528
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28809}
This CL removes a long unused fallback behavior for the reverb
computation.
Bug: webrtc:8671
Change-Id: I4b57795a9bb33769237858f40392881ee235653e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/148520
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28802}
This is the last CL required to migrate WebRTC to ABSL_FLAG, rtc::Flag
will be removed soon after this one lands.
Bug: webrtc:10616
Change-Id: I2807cec39e28a2737d2c49e2dc23f2a6f98d08f0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/145727
Reviewed-by: Tommi <tommi@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28606}
Make the GN conditionals match what happens in sources, or the other way around. Include headers only when they're used.
Bug: None
Change-Id: Ib8e3346e3c24eaa7e61ac4776dcd66efe2cc5c65
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/144880
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Andreassson <henrika@webrtc.org>
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Commit-Queue: Oleh Prypin <oprypin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28500}
The last run-time logic for selecting function pointers was removed in
May 2016, here: https://codereview.webrtc.org/1955413003
It would be even better if we could eliminate the function pointers
entirely and just have different implementations that we select at
compile time; I've left a TODO asking for this.
Bug: webrtc:9553
Change-Id: Ica71d71e19759da00967168f6479b7eb8b46c590
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/144053
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28414}
Only remaining user is WavReader. Demote its constructor
accepting a PlatformFile to private, to refactor implementation
in a later cl.
Bug: webrtc:6463
Change-Id: I7b950be6f02073cb135dd0fab1190b9dc0de1fba
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/144025
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28410}
It seems unnecessary to lock it if not actually reinitializing.
Bug: webrtc:10205
Change-Id: Ib3292e1d640a92a7df77400aebe9583cf877f824
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/115460
Commit-Queue: Oskar Sundbom <ossu@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28060}
Add a PlayoutVolumeChange RuntimeSetting. Trigger an echo path change when the playout volume is changed.
Bug: webrtc:10608
Change-Id: I1e736b93c1865d08c7d2582f6fe00216c1e1f72e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/135746
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Fredrik Hernqvist <fhernqvist@webrtc.org>
Commit-Queue: Fredrik Hernqvist <fhernqvist@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27913}
Use the C++-style stdlib headers, add `std::` prefix, in order to avoid implicit casts to double.
Bug: None
Change-Id: I78d9caaee715be341d2480c6d5e769068966d577
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133625
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Oleh Prypin <oprypin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27905}
This CL removes the redundant enable flags from AEC2 and AECM
Bug: webrtc:5298
Change-Id: Icc575abf1c368dda02ca77f057d166f1c921f662
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/135100
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27848}
This CL removes the legacy reporting of histogram data for AEC2.
Bug: webrtc:5298
Change-Id: I838e729e0fb78d28e16de0fa79ddf5c857682d65
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/135101
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27834}
- add test that checks that the computed VAD probability is within
tolerance *1
- speed-up some tests by reducing the input length and skipping frames
- remove unused code in test_utils
- fix some comments
*1: RnnVadTest::RnnBitExactness is replaced by
RnnVadTest::RnnVadProbabilityWithinTolerance
Bug: webrtc:10480
Change-Id: I19332d06eacffbbe671bf7749ff4c92798bdc55c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133910
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27803}
This CL ensures that the AECm is only created when needed.
The changes in the CL are bitexact when running AECm via
audioproc_f
The CL also corrects an issue where there is a risk for
AEC2 to not be correctly setup when the sample rate
changes inbetween activations.
Bug: webrtc:8671
Change-Id: Id3b33e20969b1543e28c885d47495246cfbe549d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134216
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27800}
This CL extends the supported runtime settings in
APM to also comprise the AGC2 fixed gain.
The CL was originally created by Adam Whiteside.
Bug: webrtc:10574
Change-Id: I79b3d6501f1e202b66a9b6018f8a493a56b01f62
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134101
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27782}
This CL ensures that the AEC2 is only created when needed.
The changes in the CL are bitexact when running AEC2 via
audioproc_f
Bug: webrtc:8671
Change-Id: I5f6d33e45a7031c69ac53098781635c415668e49
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129740
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27772}
The one with enum.IntFlag is not feasible. An attempt is done here:
https://webrtc-review.googlesource.com/c/src/+/133884
It requires re-writing QualityAssessment to Python3 which is too much
work for little benefit. (I tried, but couldn't get the unit-tests to
pass for both 2 and 3.)
The second one is not a real todo.
TBR=alessiob@webrtc.org
NOPRESUBMIT=True
Bug=None
NOTRY=True
Change-Id: Ia25817533cd504c30490f86e4058f0b2d59dd39c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133908
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27715}
The acoustic echo canceler AEC2 is being deprecated. The routing for reporting these metrics as UMA stats has outlived the metrics'usefulness.
Bug: webrtc:10563
Change-Id: Ib96693dfc43e25a0cfecad7d5d2043116ca7e6b5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133573
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27699}
As non-linear mode uses a suppressed version of y (not e) as output, this change
uses Y2, rather than E2, as nearend spectrum when computing the suppression gains.
E2 is still used in linear mode.
This change also affects how the minimum suppression gains are calculated. The
minimum gain is now min_echo_power / weighted_residual_echo.
Bug: webrtc:10550
Change-Id: I2904c5a09dd64b06bf25eb5a37c18dab50297794
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133023
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27629}
This CL changes the APM unittests to use AEC3 instead of
AEC2.
Bug: webrtc:8671
Change-Id: I80f88dbafb7c31696abd8b7efb5a187a9fb30d1c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129420
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27607}
This CL allows audioproc_f to overrule any runtime settings for the
pre-amplifier gain that are present in the aecdump file.
Bug: webrtc:10546
Change-Id: I74dbf8d043f59b516bf0abc80f266e965af0754d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132558
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27598}
* This is too brittle and might clash with MSVC's M_PI. See [1].
* We only used it once (in a unit test).
* We shouldn't use PI anyway [2].
Instead, pull it from <cmath> with _USE_MATH_DEFINES,
like it's already done in the code base.
[1] https://ci.chromium.org/p/webrtc/builders/try/win_x86_msvc_rel/6844
[2] https://tauday.com/tau-manifesto
Bug: webrtc:9855
Change-Id: I7a6976240604ef367ea07478d8cb5e4020e5dfeb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132548
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Yves Gerey <yvesg@google.com>
Cr-Commit-Position: refs/heads/master@{#27597}
This CL corrects the minimum bound for the estimated
comfort noise level.
Bug: webrtc:10533
Change-Id: I473275ffbc7bb52572315849f30e13b764109d92
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132003
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27567}
The configuration parameter filter.use_linear_filter can be used to
disable the linear filtering. Disabling the linear filter is equivalent
to runing in non-linear mode.
Bug: b/130016532
Change-Id: I8ffdf474822888b9915444bba6cc1c25ec1efe5a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132552
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27566}
This CL replaces KissFFT with PFFFT for the spectral features
computation.
Remarks:
- Extra FFT output vector copy eliminated
- Scaling and windowing merged into a single vector for efficiency
- Nyquist frequency hack to keep the iteration in
BandFeaturesExtractor::ComputeSpectralCrossCorrelation simple
Bug: webrtc:9577, webrtc:10480
Change-Id: I436563bd257f66a243f5402be270ffcf859bd184
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/130221
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27536}
This CL refactors the computation of band energy and spectral
cross-correlation coefficients by moving and optimizing
the code from ComputeBandCoefficients, ComputeBandEnergies and
ComputeSpectralCrossCorrelation into a single class (named
BandFeaturesExtractor).
This change will also help replacing FFT library in the RNN VAD.
Bug: webrtc:10480
Change-Id: I6cefa23e8f3bc8de6eb09d3ea434699d5e19124e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129726
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27535}
Semi-automatically created with:
git grep -l " testing::" | xargs sed -i "s/ testing::/ ::testing::/g"
git grep -l "(testing::" | xargs sed -i "s/(testing::/(::testing::/g"
git cl format
After this, two .cc files failed to compile and I have fixed them
manually.
Bug: webrtc:10523
Change-Id: I4741d3bcedc831b6c5fdc04485678617eb4ce031
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132018
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27526}
This change makes it possible to disable AEC3's render delay
controller and delay estimator, and instead rely on an external
delay estimator. The delay is communicated via SetAudioBufferDelay.
When the feature is enabled, no echo removal will be performed
until the first delay is provided.
The delay is
Bug: b/130016532
Change-Id: I16643109d78d770ff1d2713cf247b0b9cce1bc1c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131327
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27467}
This CL extends, and partly corrects, the benchmarking
code in audioproc_f to provide statistics for the API
call durations in audioproc_f
Bug: chromium:939791
Change-Id: I4c26c4bb3782335f13dd3e21e6f861842539ea62
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129260
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27443}
This change removes the (unused) ability of EchoRemover overriding
the delay of the RenderDelayController. The change is tested for
bit-exactness.
Bug: webrtc:8671
Change-Id: I188ef740f1437de64ffe236d07a7dcd4128192c2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/130518
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27414}
And delete corresponding dependencies on :webrtc_common. After this
change, common_types.h is included directly only from code in the
following directories:
api/
api/video/
api/video_codecs/
common_video/libyuv/include/
media/base/
modules/remote_bitrate_estimator/
modules/rtp_rtcp/source/
modules/video_coding/codecs/vp9/
There remains plenty of indirect dependencies on the types declared in
common_types.h, but the fewer direct dependencies should make it
easier to find the proper place for each type.
Bug: webrtc:5876
Change-Id: I93e8f214025ecb613c19fdec2015bd3f96c59aae
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/130501
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27376}
This change prevents FilterAnalyzer from accessing memory out-of-bounds
when the filter is resized.
Bug: chromium:946439
Change-Id: I7e2392c8b1ff0ff55566c663bf6d7a40d7754501
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129928
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27318}
The pointer-to-submodule interfaces are being removed.
This CL:
1) introduces AudioProcessing::Config::GainController1 with most config,
2) adds functions to APM for setting and getting analog gain,
3) creates a temporary GainControlConfigProxy to support the transition
to the new config.
4) Moves the lock references in GainControlForExperimentalAgc and
GainControlImpl into the GainControlConfigProxy, as it becomes the
sole AGC object with functionality exposed to the client.
Bug: webrtc:9947, webrtc:9878
Change-Id: Ic31e15e9bb26d6497a92b77874e0b6cab21ff2b2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126485
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27316}
In this CL bounds are added to the index used for accessing the filter frequency response. That vector has always a capacity in memory equal to the final number of blocks of the main filter. However, at the initial part of the call or after an echo path change, a transition phase is started and a filter with a lower number of blocks is used and, therefore, its size is lower than that capacity during that transition phase.
Bug: webrtc:10463
Change-Id: I6ebfdea43047a3fa993a27f2c52bb3024df84ffe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/128777
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27264}
This CL replaces death tests placed inside a loop with a parametric test.
A better option is to mock Pffft::IsValidFftSize and test CreatePffftWrapper
when the former returns false. However, that would require to define an
interface for the PFFFT wrapper.
Bug: webrtc:10426
Change-Id: I3c49f1b271c8bf0099a4846014bef021676ef3e0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/128862
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27260}
This CL removes parameters for AEC3 which are no longer used. To reflect
that change, one of the parameters also is renamed
Bug: chromium:941949,webrtc:8671
Change-Id: I26609b396fa14ecb7523eebfe531a1338718103b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/127780
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27128}
This change reduces the risk of echo due to noise in the headroom
of the linear filter.
Changes:
- Use shorter delay headroom
- Delay headroom is specified in samples (not blocks)
- No hysteresis limit when delay is reduced
Bug: chromium:119942,webrtc:10341
Change-Id: I708e80e26d541dff8ca04b6da2d346a1d59cbfcb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126420
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27126}
This adds a flag to audioproc_f to generate a custom call order
file from an AEC dump. This file can be used to get more realism
when simulating with wav-files.
Bug: webrtc:10393
Change-Id: I245533d18affaab2f6cef53138332d7d83c71822
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126782
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27104}
Since there is no way to enable/disable these diagnostics at runtime,
this CL moves the suppression into the rtc_* templates in order to
remove the need to explicitly add the snippet of code needed to
suppress it (currently copy/pasted in 144 locations).
The diagnostic that causes the most problems is the one about "complex
class/struct explicit ctor/dtor" [1] because WebRTC doesn't find
it useful enough.
Other diagnostics are good (for example the one that warns about
using "virtual" instead of "override", but that will be covered by
this clang-tidy check [2]) while others are Chromium related so
they have never triggered.
[1] - https://cs.chromium.org/chromium/src/tools/clang/plugins/FindBadConstructsConsumer.cpp?l=147-167&rcl=b4bebe1aa15dba7ca5fcc6456a81a55665327c3a
[2] - https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-override.html
Bug: webrtc:163
Change-Id: Icbf27efa5b369100a31e6a32df1a0913729b3b34
Reviewed-on: https://webrtc-review.googlesource.com/c/125088
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26918}
This CL adds a temporary flag for specifying that the legacy AEC2 should
be used.
Bug: webrtc:10366
Change-Id: Ie3edaa1560cdc1282b62242beb67aa6fee7f2841
Reviewed-on: https://webrtc-review.googlesource.com/c/124980
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26891}
Import proto_library.gni when rtc_enable_protobuf is true instead of when
build_with_mozilla is false.
Makes it maybe easier to reason about the intention (e.g. intention is to not
compile any protobuf in, hence flag rtc_enable_protobuf)
The build file could not work if build_with_mozilla = true but
rtc_enable_protobuf = true.
Bug: webrtc:10338
Change-Id: I26e5983bd1519aa46c308b11796d518de5ef7597
Reviewed-on: https://webrtc-review.googlesource.com/c/123763
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26868}
Pretty-Fast Fast Fourier Transform is a 3rd party FFT C library meant to
replace other FFT libraries in WebRTC (see https://crbug.com/webrtc/9577).
This CL adds a WebRTC wrapper meant to be used inside the Audio Processing
Module (APM). As a first step, it only supports aligned memory allocated
via PFFFT. Support for the C++ standard library containers will be done
afterwards since it requires careful investigation and benchmarking (because
PFFFT uses SIMD optimizations).
The wrapper pre-allocates a scratch buffer to avoid VLA.
Bug: webrtc:9577
Change-Id: Ied00c3d3b1df292024f608ccf0ed1917d6e92e56
Reviewed-on: https://webrtc-review.googlesource.com/c/122563
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Max Morin <maxmorin@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26808}
In this CL we avoid the propagation of the echo control factory to the AudioProcessing instance when this is not set. That propagation was unnecessarily overriding the echo control factory that might have been already set on that AudioProcessing instance.
Change-Id: Ife8f479bc7a81c35ecf656e7d0ddfcc98981c74f
Bug: webrtc:10344
Reviewed-on: https://webrtc-review.googlesource.com/c/123765
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26802}
This change disables the ERLE estimation of onsets and instead assumes
minimum ERLE. This reduces the risk of echo leaks during onsets. The
estimated ERLE was sometimes incorrect due to:
- Not enough data to train on.
- Platform noise suppression can change the echo-path.
Bug: chromium:119942,webrtc:10341
Change-Id: I1dd1c0f160489e76eb784f07e99af02f44f387ec
Reviewed-on: https://webrtc-review.googlesource.com/c/123782
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26794}
The FFT output buffers sizes in SpectralFeaturesExtractor have been reduced
from N to N/2+1, where N is the audio frame size. This is required since
ComputeBandEnergies() currently calls ComputeBandCoefficients() indicating
a higher value for max_freq_bin_index, hence polluting the higher bands with
unwanted energy (coming from the symmetric conjugate copy of the Fourier
coefficients).
Bug: webrtc:10332
Change-Id: Ie080050c4f357fa95e256cf2a6bf572222e8ca44
Reviewed-on: https://webrtc-review.googlesource.com/c/123239
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Pablo Barrera González <barrerap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26761}
The lock is unnecessary and potentially unsafe:
1) All gain_control accesses in AudioProcessingImpl happen - and are intended to happen - while holding the crit_capture_ lock, and all external API calls take the same lock once inside GainControlImpl.
2) If ProcessCaptureStreamLocked (locked by crit_capture) calls a gain_control function that takes crit_render, the mandated locking order (render before capture) is violated and we might get a deadlock with the render thread.
Bug: b/123456404
Change-Id: Id7a888827e347e5e1d50e2f87d90e8b68f52b7b8
Reviewed-on: https://webrtc-review.googlesource.com/c/122087
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26637}
Googletest recently started replacing the term Test Case by Test Suite.
From now on, the preferred API is TestSuite*; the older TestCase* API
will be slowly deprecated.
This CL moves WebRTC to the new set of APIs.
More info in [1].
This CL has been generated with this script:
declare -A items
items[TYPED_TEST_CASE]=TYPED_TEST_SUITE
items[TYPED_TEST_CASE_P]=TYPED_TEST_SUITE_P
items[REGISTER_TYPED_TEST_CASE_P]=REGISTER_TYPED_TEST_SUITE_P
items[INSTANTIATE_TYPED_TEST_CASE_P]=INSTANTIATE_TYPED_TEST_SUITE_P
items[INSTANTIATE_TEST_CASE_P]=INSTANTIATE_TEST_SUITE_P
for i in "${!items[@]}"
do
git ls-files | xargs sed -i "s/\b$i\b/${items[$i]}/g"
done
git cl format
[1] - https://github.com/google/googletest/blob/master/googletest/docs/primer.md#beware-of-the-nomenclature
Bug: None
Change-Id: I5ae191e3046caf347aeee01554d5743548ab0e3f
Reviewed-on: https://webrtc-review.googlesource.com/c/118701
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26494}
The type rtc::scoped_refptr<T> is now part of api/. Please include it from
api/scoped_refptr.h.
More info: See: https://groups.google.com/forum/#!topic/discuss-webrtc/Mme2MSz4z4o.
Bug: webrtc:9887, webrtc:8205
No-Try: True
Change-Id: Ic6c7c81e226e59f12f7933e472f573ae097b55bf
Reviewed-on: https://webrtc-review.googlesource.com/c/119041
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26414}
This CL removes the legacy, no longer used, render buffering code. It
also removes four unused parameters from the AEC3 config. The change
is tested for bit-exactness.
Bug: webrtc:8671
Change-Id: I2bb6cb7a1097863f228767d757d551c00593bb00
Reviewed-on: https://webrtc-review.googlesource.com/c/119701
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26399}
In this CL a warning is avoided in the reverberation decay estimator code. The change is bitexact.
Bug: chromium:921582
Change-Id: I5a91f4b5970a21ba6da7254cf7fad8c2d0bcac4b
Reviewed-on: https://webrtc-review.googlesource.com/c/118441
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26342}
This is a reland of 80b95de765
Original change's description:
> Trim down FileWrapper class to be merely a wrapper owning a FILE*
>
> Bug: webrtc:6463
> Change-Id: If71e2f3a75dc1863bc805ab71de1e2d33294f805
> Reviewed-on: https://webrtc-review.googlesource.com/c/117881
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Alex Loiko <aleloi@webrtc.org>
> Commit-Queue: Niels Moller <nisse@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#26311}
Bug: webrtc:6463
Change-Id: I12154ef65744c1b7811974a1d871e05ed3fbbc27
Reviewed-on: https://webrtc-review.googlesource.com/c/118660
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26337}
This reverts commit 74ba99062c.
Reason for revert: Breaks downstream project.
Original change's description:
> AEC3: Lockless transfer of render data to the capture thread
>
> This CL implements a lockless queue that replaces SwapQueue
> in the RenderWriter. This avoid stalls when the render and
> capture threads are accessing the queue at the same time.
>
> Bug: webrtc:10205
> Change-Id: Ie7d6fcf9c80fad957e2a90537658fb730ca2ed72
> Reviewed-on: https://webrtc-review.googlesource.com/c/117643
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#26298}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: Ie76ee8835da4e44982d181a152c9ffa19ff33e23
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10205
Reviewed-on: https://webrtc-review.googlesource.com/c/118142
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26304}
This CL implements a lockless queue that replaces SwapQueue
in the RenderWriter. This avoid stalls when the render and
capture threads are accessing the queue at the same time.
Bug: webrtc:10205
Change-Id: Ie7d6fcf9c80fad957e2a90537658fb730ca2ed72
Reviewed-on: https://webrtc-review.googlesource.com/c/117643
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26298}
The pitch gain type in ComputePitchGainThreshold() is wrong
(size_t instead of float).
The pitch period is an unsigned integer type, but it is safer to
switch to a signed type and add checks on the sign.
Bug: webrtc:9076
Change-Id: If69d182071edab9750a320f0fbfac24aa8052ee0
Reviewed-on: https://webrtc-review.googlesource.com/c/117302
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26259}
This Config configuration will eventually replace the AudioProcessing::noise_suppression() interface.
This also introduces a proxy NoiseSuppression, returned by AudioProcessing::noise_suppression.
Without this proxy, ApplyConfig could overwrite NS settings for clients who currently use noise_suppression(). For example, the following code will not preserve the noise suppression level:
apm->noise_suppression()->set_level(NoiseSuppression::kHigh);
auto cfg = apm->GetConfig();
apm->ApplyConfig(cfg);
The NoiseSuppression instance returned by noise_suppression() has no way to update the config inside APM, so GetConfig() will return an out-of-date config which is then re-applied. This CL adds a proxy that makes this update, by forwarding Enable() and set_level() calls to ApplyConfig().
Drive-by change: AudioProcessing::Config substructs are reordered to mirror the capture processing pipeline.
Tested: Ran ToT and this CL builds of audioproc_f and verified identical settings/aecdumps.
Bug: webrtc:9947
Change-Id: I823eade894be115c254d656562564108b2b63b1f
Reviewed-on: https://webrtc-review.googlesource.com/c/116521
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26248}
Comfort noise was generated by picking random angles on the unit circle
for each frequency band and then obtaining points on the unit circle from
{cos(a), -sin(a)}.
In order to reduce complexity, this change introduces a randomly indexed
table of 32 elements over sin(a). cos(a) is obtained by adding an offset
corresponding to pi/2 to the index. The table is pre-scaled by sqrt(2) to
avoid later multiplications.
This change reduces the computational complexity of AEC3 by ~8% with no
audible degradation.
Bug: webrtc:10189
Change-Id: I8cfe2469022fb1fe910ab3f966e55d9d499b7161
Reviewed-on: https://webrtc-review.googlesource.com/c/116787
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26209}
This CL adds two unit tests to make sure that, when an echo path gain
change occurs, the echo canceller is notified.
Such a change can be caused by (i) a pre-amplifier gain change or
(ii) an analog gain change.
Bug: webrtc:7494
Change-Id: Ia47cfbbc5694340cd3e760d8d3c3393f79897a9d
Reviewed-on: https://webrtc-review.googlesource.com/c/111780
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26190}
This updates some tests to use AudioProcesing::Config() and
AudioProcessing::GetStatistics() instead.
Some tests are left with voice_detection() because
a) not all tests make sense to run both APIs in parallel, and
b) we want test coverage of the old VoiceDetection until it is removed.
Bug: webrtc:9947
Change-Id: Ifb21a1e6e931d7ad3c3a4e38f5cc4f146da3c9a3
Reviewed-on: https://webrtc-review.googlesource.com/c/116160
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26134}
This adds a second (!) VoiceDetection instance in APM, activated via webrtc::AudioProcessing::Config and which reports its values in the webrtc::AudioProcessingStats struct.
The alternative is to reuse the existing instance, but that would require adding a proxy interface returned by AudioProcessing::voice_detection() to update the internal config of AudioProcessingImpl when calling voice_detection()->Enable().
Complexity-wise, no reasonable client will enable both interfaces simultaneously, so the footprint is negligible.
Bug: webrtc:9947
Change-Id: I7d8e28b9bf06abab8f9c6822424bdb9d803b987d
Reviewed-on: https://webrtc-review.googlesource.com/c/115243
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26101}
This CL guards against null pointer dereference, as caught by
clang static analyzer [1].
It also removes a useless field initialization, which happened
to trigger a false positive from said analyser.
[1] https://chromium.googlesource.com/chromium/src/+/HEAD/docs/clang_static_analyzer.md
Bug: webrtc:8793
Bug: webrtc:9855
Change-Id: Ia0fee24395eb2df16b526bbdffa5da6275b0909a
Reviewed-on: https://webrtc-review.googlesource.com/c/115044
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Jeroen de Borst <jeroendb@webrtc.org>
Commit-Queue: Yves Gerey <yvesg@google.com>
Cr-Commit-Position: refs/heads/master@{#26091}
This replaces the current usage of AudioProcessing::level_estimator()
in that test.
The unit tests that specifically test the level_estimator API are left
in place, until the level_estimator API itself is removed.
Bug: webrtc:9947
Change-Id: I73301c1478d2c9763bb49598a692142229102876
Reviewed-on: https://webrtc-review.googlesource.com/c/114550
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26049}
Changing VAD (voice activity detector) confidence threshold from 40%
to 90%. The proportion of samples classified as speech drops to ca 80%
of what it was when the threshold was 40%. Therefore,
kFullBufferSizeMs has to be increased by 1.0/0.8. We increase it from
1600ms to 2000ms.
TESTED = Did run the new and old configs on AEC dumps. With one minute
of kitchen noise, the new tuning boosted the noise by 3-4 db less.
Bug: chromium:913430
Change-Id: I4a2ebb6d1d309c6c20dd23c3685818b1b5ad4a66
Reviewed-on: https://webrtc-review.googlesource.com/c/113806
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25950}
It's currently used only by the VCMJitterBuffer and VCMReceiver
classes. Injection is needed by the VCMReceiverTimingTest test, which
defines a subclass(!) of EventWrapper.
Bug: webrtc:3380
Change-Id: I765be0ceac58e941928319cc426ba49f1cbdc5fa
Reviewed-on: https://webrtc-review.googlesource.com/c/113002
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25893}
Fixes the ENR threshold used in the dominant nearend detection when
the kill-switch WebRTC-Aec3UseLegacyNormalSuppressorTuning is pulled.
Bug: webrtc:8671,chromium:911141
Change-Id: I30ee58009633b3a9e12eff692226baada624a049
Reviewed-on: https://webrtc-review.googlesource.com/c/112903
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25880}
Correcting a mistake in the dominant nearend detection where
the meaning of the echo-to-nearend ratio was inversed.
Bug: webrtc:8671
Change-Id: I7f56369fad1784e256150c312b6b3dafcb9d0f71
Reviewed-on: https://webrtc-review.googlesource.com/c/112136
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25818}
In this CL the analysis of the impulse response that is done in the FilterAnalyzed class is changed in order to reduce its complexity. Instead of analyzing the whole impulse response in each Update call a smaller region is analyzed. That region is changed at each Update call which implies that several calls are needed in order to analyze the complete impulse response.
Bug: webrtc:10032,chromium:909007
Change-Id: Ic58be34ba18485311c63e0fed9b6e892f9cb864c
Reviewed-on: https://webrtc-review.googlesource.com/c/111602
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25817}
This adds an interface for accessing stats on the capture stream, and
adds a level estimator to report one of the stats.
Bug: webrtc:9947
Change-Id: Id472534fa2e04d46c9ab700671f620584a246afb
Reviewed-on: https://webrtc-review.googlesource.com/c/109587
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25786}
This CL decouples //rtc_base:rtc_base_tests_utils from gunit by
moving gunit helpers (rtc_base/gunit.h) and rtc_base/testclient.h
(which depends on gunit helpers) to their own build target.
It also removes some unused dependencies in the WebRTC build graph.
Bug: None
Change-Id: Ia9820e84ff697da39b351eef73c45f6e4bdf2623
Reviewed-on: https://webrtc-review.googlesource.com/c/111861
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25769}
This change introduces a clockdrift detector operating on the estimated
delay of the echo path delay estimator. Each time the delay estimate
changes it is compared to previous estimates. If the estimates are
slowly increasing or decreasing, clockdrift is detected.
Four different patterns are considered clockdrift:
- k, k+1, k+2, k+3
- k, k+2, k+1, k+3
- k, k-1, k-2, k-3
- k, k-2, k-1, k-3
A delay estimate history matching the three last elements in one of the
patterns is considered probable clockdrift. Matching all four elements
is considered verified clockdrift.
If the delay is constant for some time after clockdrift is detected the
clockdrift detector will revert to no detected clockdrift.
The level of clockdrift is reported via an UMA histogram.
Bug: webrtc:10014
Change-Id: I1cce4d593e101a8b3fa99df6935e59b4243cb97a
Reviewed-on: https://webrtc-review.googlesource.com/c/111381
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25758}
Avoid that the client code relies on the adaptive digital mode being
enabled by default (error prone).
Bug: webrtc:7494
Change-Id: I765fecf535cf31a2163e10595a42520473c233b6
Reviewed-on: https://webrtc-review.googlesource.com/c/111586
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25728}
In this CL a more precise estimation of the Erle is introduced. This is done by creating different estimators that are specialized in different regions of the linear filter. An estimation of which regions were used for generating the current echo estimate is performed and used for selecting the right Erle estimator.
Bug: webrtc:9961
Change-Id: Iba6eb24596c067c3c66d40df590be379d3e1bb7b
Reviewed-on: https://webrtc-review.googlesource.com/c/109400
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25707}
This CL makes possible to choose the level estimation for the adaptive
digital GC of AGC2. The options are RMS (default and currently used
estimator) and peak-based (already computed, but not used).
Besides adding the new AGC2 config param for the level estimator, this CL
also refactors the config class by making it more structured.
Bug: webrtc:7494
Change-Id: I20eb558ca50f13536aa7bdea08d21de3b630f8bc
Reviewed-on: https://webrtc-review.googlesource.com/c/110144
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25620}
Gain specified by fuzzer in APM config was too high.
Bug: chromium:901661
Change-Id: Id3ea8d23a4284a35c827bb16125902d84e37ca1e
Reviewed-on: https://webrtc-review.googlesource.com/c/110604
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Jonas Olsson <jonasolsson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25594}
This reverts commit 61c6e5643e.
Reason for revert: downstream projects prepared for this change
Original change's description:
> Revert "Isolating APM API build target: making :api an actual target."
>
> This reverts commit a7f77a7c05.
>
> Reason for revert: breaking downstream
>
> Original change's description:
> > Isolating APM API build target: making :api an actual target.
> >
> > This CL is part of a refactoring work to unblock other CLs
> > that would generate a circular dependency when including
> > modules/audio_processing. It will also allow to easily move
> > the APM interface part under //api.
> >
> > More in detail, this change moves the APM interface files from
> > the build target modules/audio_processing to
> > modules/audio_processing:api. It also adds :api as dependency
> > where needed.
> >
> > Bug: webrtc:9535
> > Change-Id: I72829e22d08ba4d75985f0421e6e8bf0216ebecd
> > Reviewed-on: https://webrtc-review.googlesource.com/c/109501
> > Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> > Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
> > Reviewed-by: Niels Moller <nisse@webrtc.org>
> > Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> > Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#25539}
>
> TBR=saza@webrtc.org,alessiob@webrtc.org,kwiberg@webrtc.org,nisse@webrtc.org,kthelgason@webrtc.org
>
> Change-Id: I974c6237311e7c06970aa62e5f6940f3aa80113d
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: webrtc:9535
> Reviewed-on: https://webrtc-review.googlesource.com/c/109820
> Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
> Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25540}
TBR=saza@webrtc.org,alessiob@webrtc.org,kwiberg@webrtc.org,nisse@webrtc.org,kthelgason@webrtc.org
Change-Id: Ic8ed4cc3baf43d639ce13cae256c007728c3ad92
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9535
Reviewed-on: https://webrtc-review.googlesource.com/c/109884
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25547}
This reverts commit a7f77a7c05.
Reason for revert: breaking downstream
Original change's description:
> Isolating APM API build target: making :api an actual target.
>
> This CL is part of a refactoring work to unblock other CLs
> that would generate a circular dependency when including
> modules/audio_processing. It will also allow to easily move
> the APM interface part under //api.
>
> More in detail, this change moves the APM interface files from
> the build target modules/audio_processing to
> modules/audio_processing:api. It also adds :api as dependency
> where needed.
>
> Bug: webrtc:9535
> Change-Id: I72829e22d08ba4d75985f0421e6e8bf0216ebecd
> Reviewed-on: https://webrtc-review.googlesource.com/c/109501
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
> Reviewed-by: Niels Moller <nisse@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25539}
TBR=saza@webrtc.org,alessiob@webrtc.org,kwiberg@webrtc.org,nisse@webrtc.org,kthelgason@webrtc.org
Change-Id: I974c6237311e7c06970aa62e5f6940f3aa80113d
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9535
Reviewed-on: https://webrtc-review.googlesource.com/c/109820
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25540}
This CL is part of a refactoring work to unblock other CLs
that would generate a circular dependency when including
modules/audio_processing. It will also allow to easily move
the APM interface part under //api.
More in detail, this change moves the APM interface files from
the build target modules/audio_processing to
modules/audio_processing:api. It also adds :api as dependency
where needed.
Bug: webrtc:9535
Change-Id: I72829e22d08ba4d75985f0421e6e8bf0216ebecd
Reviewed-on: https://webrtc-review.googlesource.com/c/109501
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25539}
The analysis and synthesis windowing cause loss of power when
cross-fading the noise where frames are completely uncorrelated
(generated with random phase).
This CL also removes duplicate code and enables platform specific
optimizations for ARM in the comfort noise generation.
Bug: webrtc:9967,chromium:902262
Change-Id: Iffd59b301876442079d4a5f2c7fac55a3522397c
Reviewed-on: https://webrtc-review.googlesource.com/c/109581
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25526}
This change corrects the computation of the comfort noise gains.
Previously the comfort noise gain of band k, CG_k, was computed
from suppression gain of band k, SG_k, as:
CG_k = 1 - SG_k
But since the two signals are uncorrelated (the comfort noise
is randomly generated), the correct gain to maintain power is:
CG_k = sqrt(1 - SG_k^2).
Bug: webrtc:9967,chromium:902262
Change-Id: I393495742163d5e658bca4ab2f7a5067ab15af01
Reviewed-on: https://webrtc-review.googlesource.com/c/109580
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25525}
This CL is part of a refactoring work to unblock other CLs
that would generate a circular dependency when including
modules/audio_processing. It will also allow to easily move
the APM interface part under //api.
More in detail, this change adds a dummy build target named :api
in modules/audio_processing. It is needed to adapt the downstream
projects before the APM interface files are moved to the :api target.
A follow up CL will make :api an actual target and will remove
the interface files from :audio_processing.
Bug: webrtc:9535
Change-Id: Ifb4e1a0ac7e482a8a089ef858d7e9a91f974e51f
Reviewed-on: https://webrtc-review.googlesource.com/c/109585
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25523}
This drops the locks and annotations in EchoControlMobileImpl,
now that the interface is no longer externally accessible.
Additionally, SetEchoPath and GetEchoPath (with surrounding code) is
removed. They are unused.
Bug: webrtc:9929
Change-Id: Ibc6751754614ed39836f6ee6835d7b53dedd828c
Reviewed-on: https://webrtc-review.googlesource.com/c/109025
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25504}
This CL refactors AGC2 and fixes the order with which the fixed
and the adaptive digital gain controllers are applied - i.e., fixed
first, then adaptive and finally limiter.
FixedGainController has been removed since we need to split the
processing done by the gain applier and the limiter.
Also, GainApplier and Limiter are easy enough to be used without
a wrapper and a wrapper would need 2 separated calls in the right
order - i.e., error prone.
FrameCombiner in audio mixer has been adapted and now only uses the
limiter (which is what is needed since no gain is applied).
The unit tests for FixedGainController have been moved to
gain_controller2_unittests. They have been re-adapted and
ChangeFixedGainShouldBeFastAndTimeInvariant has been re-tuned.
Bug: webrtc:7494
Change-Id: I4d7daeae917257ac019a645b74deba6642f77322
Reviewed-on: https://webrtc-review.googlesource.com/c/108624
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25477}
The extra saturation margin is a setting for the SaturationProtector
in GainController2. The higher it is, the less gain GC2 will apply. In
this CL we pipe the setting up to audio_processing.h. Now the setting
can be set at a high level.
Also in this CL add a few (missing, they should have been there
already) tests for the GC2 and GC2 with saturation margin.
Bug: webrtc:7494
Change-Id: I1b61f1662e6c6a8817fd5b0e845339694bf8d50d
Reviewed-on: https://webrtc-review.googlesource.com/c/109001
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25470}
Additionally, AudioProcessing::GetStatistics(bool) is made pure
virtual and the default implementation in AudioProcessing is removed.
Deprecation PSA:
https://groups.google.com/forum/#!msg/discuss-webrtc/NgqEPvkNuDE/7HtwnMmADgAJ
Bug: webrtc:9947, webrtc:8572
Change-Id: I123402bf7d6c49f3613154c469b818109d8fad43
Reviewed-on: https://webrtc-review.googlesource.com/c/108783
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25463}
This drops the locks and annotations in EchoCancellationImpl,
now that the interface is no longer externally accessible.
Bug: webrtc:9929
Change-Id: I401256f523340cbabce23a5914ab28ce44179935
Reviewed-on: https://webrtc-review.googlesource.com/c/108602
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25460}
This CL utilizes the existing, but unused, ability to set
different histogram thresholds for early and late delay
estimation. It does so by tuning the parameters for these.
On top of that, some corrections are added to correctly
handle resets and the use of the hysteresis thresholds.
Bug: webrtc:19886,chromium:896334
Change-Id: I950ac107c124541af8f02b4403f477dda71cc1a1
Reviewed-on: https://webrtc-review.googlesource.com/c/106706
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25443}
This CL creates a new API for the parser of APM json config that
that provides an explicit way for the user to know when there has
been an issue in the parsing of the json config data.
Bug: webrtc:9921
Change-Id: Idd8f40529f40ab6871efb5b356c0fd2cea21b7d9
Reviewed-on: https://webrtc-review.googlesource.com/c/107841
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25355}
This CL modifies the internal data logging and the audioproc_f tool
to allow controlling that via the command line, rather than solely via a
build flag. The logging of internal data is by default off.
Bug: webrtc:5298
Change-Id: I96d1b4f990582938527b9039d6c2ecbb6f76e9ca
Reviewed-on: https://webrtc-review.googlesource.com/c/107713
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25352}
This CL allows control over the dominant nearend functionality so that
it is not active during the initial phase, when estimates are less
certain.
Bug: webrtc:9906,chromium:898273
Change-Id: I5f61dac806ec3b1ebc1a3ec72f0a16d07a67f14a
Reviewed-on: https://webrtc-review.googlesource.com/c/107632
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25326}
Limiter has been renamed to LimiterDbGainCurve, which is a more correct name
and will allow in a follow-up CL to reuse the Limiter name for GainCurveApplier.
This is done to allow to use the limiter without instancing the fixed digital
gain controller and then to fix an AGC2 issue (namely, fixed gain applied after
the adaptive one).
Bug: webrtc:7494
Change-Id: Icd7050e3e51b832bfbf35e5cc61109215c5b1ca6
Reviewed-on: https://webrtc-review.googlesource.com/c/106901
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25322}
This CL is the result of running include-what-you-use tool on part
of the code base (audio target and dependencies) plus manual fixes.
bug: webrtc:8311
Change-Id: I277d281ce943c3ecc1bd45fd8d83055931743604
Reviewed-on: https://webrtc-review.googlesource.com/c/106280
Commit-Queue: Yves Gerey <yvesg@google.com>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25311}
This change makes the dominant nearend detection more accurate.
- The hangover is increased not leave nearend state between words.
- The SNR requirement is increased to not enter nearend state without
speech activity.
- An early exit mechanism has been added to leave nearend state quickly
when the echo is strong.
Bug: chromium:897701,webrtc:9897
Change-Id: I9e0f3e6ecb80eee1c0c917d4835f110555f74acf
Reviewed-on: https://webrtc-review.googlesource.com/c/107347
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25299}
In this CL we change the signal that controls the updates of the ERLE estimator. Until now, the render signal was used which is not optimum for reverberant signals. In this CL, a reverberation has been added to the the render signal and this new signal has been used for controlling when to update the ERLE estimator.
Bug: webrtc:9873
Change-Id: I0ebea3fc208f97aa237af015ba543015d49ed978
Reviewed-on: https://webrtc-review.googlesource.com/c/105660
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25285}
This is a reland of 5ccdc1331f
Original change's description:
> Prefix flag macros with WEBRTC_.
>
> Macros defined in rtc_base/flags.h are intended to be used to define
> flags in WebRTC's binaries (e.g. tests).
>
> They are currently not prefixed and this could cause problems with
> downstream clients since these names are quite common.
>
> This CL adds the 'WEBRTC_' prefix to them.
>
> Generated with:
>
> for x in DECLARE DEFINE; do
> for y in bool int float string FLAG; do
> git grep -l "\b$x\_$y\b" | \
> xargs sed -i "s/\b$x\_$y\b/WEBRTC_$x\_$y/g"
> done
> done
> git cl format
>
> Bug: webrtc:9884
> Change-Id: I7b524762b6a3e5aa5b2fc2395edd3e1a0fe72591
> Reviewed-on: https://webrtc-review.googlesource.com/c/106682
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25270}
TBR=kwiberg@webrtc.org
Bug: webrtc:9884
Change-Id: I5ba5368a231a334d135ed5e6fd7a279629ced8a3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://webrtc-review.googlesource.com/c/107161
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25277}
This reverts commit 5ccdc1331f.
Reason for revert: Breaks downstream project.
Original change's description:
> Prefix flag macros with WEBRTC_.
>
> Macros defined in rtc_base/flags.h are intended to be used to define
> flags in WebRTC's binaries (e.g. tests).
>
> They are currently not prefixed and this could cause problems with
> downstream clients since these names are quite common.
>
> This CL adds the 'WEBRTC_' prefix to them.
>
> Generated with:
>
> for x in DECLARE DEFINE; do
> for y in bool int float string FLAG; do
> git grep -l "\b$x\_$y\b" | \
> xargs sed -i "s/\b$x\_$y\b/WEBRTC_$x\_$y/g"
> done
> done
> git cl format
>
> Bug: webrtc:9884
> Change-Id: I7b524762b6a3e5aa5b2fc2395edd3e1a0fe72591
> Reviewed-on: https://webrtc-review.googlesource.com/c/106682
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25270}
TBR=mbonadei@webrtc.org,kwiberg@webrtc.org
Change-Id: Ia79cd6066ecfd1511c34f1b30fd423e560ed6854
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9884
Reviewed-on: https://webrtc-review.googlesource.com/c/107160
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25276}
Macros defined in rtc_base/flags.h are intended to be used to define
flags in WebRTC's binaries (e.g. tests).
They are currently not prefixed and this could cause problems with
downstream clients since these names are quite common.
This CL adds the 'WEBRTC_' prefix to them.
Generated with:
for x in DECLARE DEFINE; do
for y in bool int float string FLAG; do
git grep -l "\b$x\_$y\b" | \
xargs sed -i "s/\b$x\_$y\b/WEBRTC_$x\_$y/g"
done
done
git cl format
Bug: webrtc:9884
Change-Id: I7b524762b6a3e5aa5b2fc2395edd3e1a0fe72591
Reviewed-on: https://webrtc-review.googlesource.com/c/106682
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25270}
With this CL, the main and shadow filters are no longer fully reset to
0 as the delay changes. This allows for more robust echo removal for
some scenarios.
Bug: webrtc:9879,chromium:895838
Change-Id: I859aa3df3ae41648bc8efde01ec2e2a5cb392279
Reviewed-on: https://webrtc-review.googlesource.com/c/106345
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25251}
Removing code that has no audible effect.
Bug: webrtc:8671
Change-Id: Ibd7d0d19d760ae16b09285498c2ee09b42eb5968
Reviewed-on: https://webrtc-review.googlesource.com/c/106301
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25250}
This CL introduces two related changes
1) It changes the way that the AEC3 determines whether the linear
filter is sufficiently good for its output to be used. The new scheme
achieves this much earlier than what was done in the legacy scheme.
2) It changes the way that saturated echo is and handled so that the
impact of the nearend speech is lower.
Bug: webrtc:9835,webrtc:9843,chromium:895435,chromium:895431
Change-Id: I0b493676886e2134205e9992bbe4badac7e414cc
Reviewed-on: https://webrtc-review.googlesource.com/c/104380
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25208}
This CL simplifies the buffering of render data. Instead of making assumptions
about the worst possible platform, it leverages recent improvements in
the delay estimator to quickly adapt when the conditions change.
Pros:
- No capture delay, delay is found ~200 ms faster.
- Cleaner code that makes the concept of delay more clear.
- Allows for removal of one matched filter because of the jitter headroom
removal.
Cons:
- Delay estimator needs to re-adapt when the call jitter increases.
The code can be deactivated by a kill switch. When the kill switch is
pulled the CL is bit exact.
Bug: webrtc:9726,chromium:895338
Change-Id: Ie2f9c8c5ce5b5a4510b4bdb95db2b970b57cd5d0
Reviewed-on: https://webrtc-review.googlesource.com/c/96920
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25169}
In this CL the use of the stationarity properties at init is set to true by default.
Bug: webrtc:9865, chromium:894439
Change-Id: I716ce0d792a50616dc38cc0ba6f2c702549a81cc
Reviewed-on: https://webrtc-review.googlesource.com/c/105303
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25123}
This CL extend critical sections to incorporate:
* private_submodules_->echo_controller
* config_
As a side benefit, it prevents weird interleaving where configuration
could have been changed in the middle of GetStatistics methods.
Bug: webrtc:9841
Change-Id: I0de5e756a684c2ff1be4effccf8c0f3d3175e3b9
Reviewed-on: https://webrtc-review.googlesource.com/c/105142
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Yves Gerey <yvesg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25121}
"Perfection is achieved, not when there is nothing more to add,
but when there is nothing left to take away."
This CL removes the following kill-switches from AEC3
- WebRTC-Aec3DownSamplingFactor8KillSwitch
- WebRTC-Aec3NewSuppressionKillSwitch
- WebRTC-Aec3ShadowFilterJumpstartKillSwitch
- WebRTC-Aec3SlowFilterAdaptationKillSwitch
- WebRTC-Aec3SuppressorNearendAveragingKillSwitch
It also removes code paths and configuration parameters that are no
longer in use. The list of kill-switches in the audio processing
fuzzer test is updated.
The change has been tested for bit-exactness.
Bug: webrtc:8671
Change-Id: Ie0af86a14baf853548bf9c00b2b9b3bbc32c1aaa
Reviewed-on: https://webrtc-review.googlesource.com/c/105324
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25120}
This CL removes outdated code for testing of platforms with clock-drift
Bug: webrtc:8671
Change-Id: Ie202c514609d9f3d2357107b0daf895331275797
Reviewed-on: https://webrtc-review.googlesource.com/c/105183
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25105}
This CL ensures that the default setting for the usage of stationary signal
properties is not overridden by mistake.
Bug: chromium:894243
Change-Id: I85ab65383ee82b5f3153864da7a0cede7776c146
Reviewed-on: https://webrtc-review.googlesource.com/c/105181
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25104}
This CL changes the tuning of the echo suppressor for the case when
there is echo only. The resulting effect is a slight increase of
transparency
Bug: webrtc:9844,chromium:893744
Change-Id: I5e6a867e0d03dc3a468a8f5cfa64103e001baae1
Reviewed-on: https://webrtc-review.googlesource.com/c/104760
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25075}
This CL utilizes the AEC3 ability to tailor the suppressor during
situations when the nearend dominates over the residual echo. This is
done by increasing the thresholds for transparent echo suppressor
behavior when the nearend is strong compared to the residual echo.
Bug: webrtc:9836, chromium:893744
Change-Id: Ic06569eefc7f2557b401db43b3ac84b299071294
Reviewed-on: https://webrtc-review.googlesource.com/c/104460
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25071}
This is a new attempt to reduce the filter divergence
during double-talk without regressing in clock-drift
scenarios.
- The error_floor in decreased to allow for slow adaptation
when the filter performs well.
- The leakage_diverged is increased to allow for fast adaptation
when the shadow filter performs better.
- A new parameter, error_ceil, was added to stop the filter from
adapting too fast.
Bug: webrtc:9746,chromium:883264
Change-Id: Ie2868d2388b48412a192a004ec13f9eff34517b8
Reviewed-on: https://webrtc-review.googlesource.com/c/100460
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25063}
This CL lowers the default reverb decay to better match the standard
rooms where calls are made.
Bug: webrtc:9843
Change-Id: I46f1a629ecfdd72561829326d4fa58ede8107b6c
Reviewed-on: https://webrtc-review.googlesource.com/c/104740
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25061}
Original CL: https://webrtc-review.googlesource.com/c/src/+/101340
A (actually several weeks) while ago, we noticed an error with the
WebRTC.Audio.Agc2.EstimatedNoiseLevel histogram. It always reported
the value 0. Here is why:
The histogram bins go from 0 to 100. But the value logged is dBFS. It
is always less than or equal to 0. This CL changes inverts the value
logged. The noise level value should be somewhere between -90 and 0
dBFS.
The histogram description is updated in
https://chromium-review.googlesource.com/c/chromium/src/+/1264578
Bug: webrtc:7494
Change-Id: I0b53630d4284ce1078fd453e05e89ee53ca9f6c7
Reviewed-on: https://webrtc-review.googlesource.com/c/104063
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25021}
The AdaptiveAgc often boosts the signal outside of Float S16 range. It
is expected, which is why we have a limiter after it in the process
chain. But it turns out that this happens regularly even for simple
input examples. The output signal peaks can be as high as +4 dBFs for a
single speaker example (which should be easy). It leads to excessive
gain modulation by the limiter.
This CL is a new tuning designed to produce a safer gain. After this,
we shouldn't hit the saturation region of the limiter as often. But we
will still maintain a high gain.
We have a 'configurable kill-switch': the settings can be changed via
field trials WebRTC-Audio-Agc2Force(Initial|Extra)SaturationMargin.
Bug: webrtc:7494, chromium:892043
Change-Id: I5014377050c74c32ae8998282991141eae31cf58
Reviewed-on: https://webrtc-review.googlesource.com/c/102922
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25006}
This CL introduces a major refactoring of AecState for the purpose of
simplifying further improvements to the logic in this code.
The changes have successfully been tested for bitexactness.
Bug: webrtc:8671
Change-Id: If98efde55a22c76b093089a11a0562daac7e16e6
Reviewed-on: https://webrtc-review.googlesource.com/c/102362
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24996}
After the removal of field_trial_default, metrics_default and
runtime_enabled_features_default, this build target doesn't build
anything and can be safely removed.
Bug: webrtc:9631
Change-Id: Iee1111e065ffefe0b4b9a695ee67a594e6d82caa
Reviewed-on: https://webrtc-review.googlesource.com/c/103702
Reviewed-by: Oleh Prypin <oprypin@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24976}
This reverts commit 9e24dcff16.
Reason for revert: Breaks chromium.webrtc.fyi bots.
Original change's description:
> Export symbols needed by the Chromium component build (part 1).
>
> This CL uses RTC_EXPORT (defined in rtc_base/system/rtc_export.h)
> to mark WebRTC symbols as visible from a shared library, this doesn't
> mean these symbols are part of the public API (please continue to refer
> to [1] for info about what is considered public WebRTC API).
>
> [1] - https://webrtc.googlesource.com/src/+/HEAD/native-api.md
>
> Bug: webrtc:9419
> Change-Id: I802abd32874d42d3aa5ecd3c8022e7cf5e043d99
> Reviewed-on: https://webrtc-review.googlesource.com/c/103505
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Reviewed-by: Niels Moller <nisse@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24969}
TBR=mbonadei@webrtc.org,kwiberg@webrtc.org,nisse@webrtc.org
Change-Id: I01f6e18f0d2c0f0309cdaa6c943c3927e1f1f49f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9419
Reviewed-on: https://webrtc-review.googlesource.com/c/103720
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24974}
This CL uses RTC_EXPORT (defined in rtc_base/system/rtc_export.h)
to mark WebRTC symbols as visible from a shared library, this doesn't
mean these symbols are part of the public API (please continue to refer
to [1] for info about what is considered public WebRTC API).
[1] - https://webrtc.googlesource.com/src/+/HEAD/native-api.md
Bug: webrtc:9419
Change-Id: I802abd32874d42d3aa5ecd3c8022e7cf5e043d99
Reviewed-on: https://webrtc-review.googlesource.com/c/103505
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24969}
This CL adds the ability to toggle the AGC2 adaptive digital mode in
audioproc_f
Bug: webrtc:5298
Change-Id: If1567d8c87f88992dff89253edb293a56cee0a73
Reviewed-on: https://webrtc-review.googlesource.com/c/103361
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24954}
This is a reland of 2fbb83b16b
Original change's description:
> Remove APM-internal usage of EchoControlMobile
>
> This is a sibling CL to a similar one for EchoCancellation:
> https://webrtc-review.googlesource.com/c/src/+/97603
>
> - EchoControlMobileImpl will no longer inherit EchoControlMobile.
> - Removes usage of AudioProcessing::echo_control_mobile() inside most of
> the audio processing module and unit tests.
>
> The CL breaks audioproc_f backwards compatibility: It can no longer
> use all recorded settings (comfort noise, routing mode), but prints an
> error message when unsupported settings are encountered.
>
> Tested: audioproc_f with .wav and aecdump inputs.
> Bug: webrtc:9535
> Change-Id: I63c3c81bcaf44021315978e1a0f3e42173b988ce
> Reviewed-on: https://webrtc-review.googlesource.com/101621
> Reviewed-by: Alex Loiko <aleloi@webrtc.org>
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24888}
Bug: webrtc:9535
Change-Id: I172706c6729cac4eb6afde1ebd6fc8f3a289d6c7
Reviewed-on: https://webrtc-review.googlesource.com/c/102881
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24943}
This CL corrects the incorrectly implemented check to avoid that AEC3
reacts on the initial pre-amp gain setting.
TBR: devicentepena@webrtc.org
Bug: webrtc:9805
Change-Id: I5decbf00a80457f24b8cd499c35720805ff9ccbc
Reviewed-on: https://webrtc-review.googlesource.com/c/103360
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24938}
In this CL the ERLE estimator is reset after a pre-amplifier gain change is communicated to APM.
Bug: webrtc:9805
Change-Id: I040f344e4607e862240250f9478d06de0d58a096
Reviewed-on: https://webrtc-review.googlesource.com/103222
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24933}
This change does three things:
- Move rtc_json into rtc_base/strings/, a non-API directory more fitting to
its purpose.
- Make a target for the currently unused json_unittest.
- Make the code available for use in non-test code again.
Bug: webrtc:9802
Change-Id: Id964a8a4b47b732a962a364894a4dbd3e7f4650f
Reviewed-on: https://webrtc-review.googlesource.com/103126
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24932}
Hypothetical scenario: short weak speech at start of call, then high
noise. The digital adaptive AGC2 would pick a high gain, and then
continue to apply it on the noise. Unless the noise is detected by the
noise estimator, the gain would never be reduced.
This CL addresses the issue by sending limiter gain info to the
adaptive digital AGC2.
Bug: webrtc:7494
Change-Id: Idf5c2686af0f5e5bad981d39a95b8efc9ffb9d64
Reviewed-on: https://webrtc-review.googlesource.com/102641
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24922}
This reverts commit 2fbb83b16b.
Reason for revert: Speculative revert over failing Chromium bot:
https://ci.chromium.org/p/chromium/builders/luci.chromium.webrtc.fyi/WebRTC%20Chromium%20FYI%20Android%20Tests%20%28dbg%29%20%28M%20Nexus5X%29/117
Original change's description:
> Remove APM-internal usage of EchoControlMobile
>
> This is a sibling CL to a similar one for EchoCancellation:
> https://webrtc-review.googlesource.com/c/src/+/97603
>
> - EchoControlMobileImpl will no longer inherit EchoControlMobile.
> - Removes usage of AudioProcessing::echo_control_mobile() inside most of
> the audio processing module and unit tests.
>
> The CL breaks audioproc_f backwards compatibility: It can no longer
> use all recorded settings (comfort noise, routing mode), but prints an
> error message when unsupported settings are encountered.
>
> Tested: audioproc_f with .wav and aecdump inputs.
> Bug: webrtc:9535
> Change-Id: I63c3c81bcaf44021315978e1a0f3e42173b988ce
> Reviewed-on: https://webrtc-review.googlesource.com/101621
> Reviewed-by: Alex Loiko <aleloi@webrtc.org>
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24888}
TBR=saza@webrtc.org,aleloi@webrtc.org
Change-Id: I1f8a27ac291f2cdc16c8daa32e399b74d489dbb9
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9535
Reviewed-on: https://webrtc-review.googlesource.com/102642
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24895}
These submodules implicitly rely on low cut filtering being enabled.
This CL clarifies a distinction:
High pass filtering is a feature that users can enable, according to the WebRTC standard.
Low cut filtering is a processing effect that is applied when any of the following is active:
- high pass filter
- noise suppression
- builtin echo cancellation
Bug: webrtc:9535
Change-Id: I9474276fb11354ea3b01e65a0699f6c29263770b
Reviewed-on: https://webrtc-review.googlesource.com/102600
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24892}
This is a sibling CL to a similar one for EchoCancellation:
https://webrtc-review.googlesource.com/c/src/+/97603
- EchoControlMobileImpl will no longer inherit EchoControlMobile.
- Removes usage of AudioProcessing::echo_control_mobile() inside most of
the audio processing module and unit tests.
The CL breaks audioproc_f backwards compatibility: It can no longer
use all recorded settings (comfort noise, routing mode), but prints an
error message when unsupported settings are encountered.
Tested: audioproc_f with .wav and aecdump inputs.
Bug: webrtc:9535
Change-Id: I63c3c81bcaf44021315978e1a0f3e42173b988ce
Reviewed-on: https://webrtc-review.googlesource.com/101621
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24888}
This CL removes some deprecated build targets (and their headers)
from system_wrappers:
- field_trial_api
- field_trial_default
- metrics_api
- metrics_default
It also refreshes all the dependencies on field_trial.h and metrics.h.
A nice side effect is that it is finally possible to remove 'nogncheck'
from the following files (when it was used with field_trial_default
and metrics_default):
- sdk/objc/api/peerconnection/RTCMetricsSampleInfo+Private.h
- sdk/android/src/jni/pc/peerconnectionfactory.cc
- sdk/objc/api/peerconnection/RTCFieldTrials.mm
Bug: webrtc:9631
Change-Id: Ib621f41ef8ad0aba4fe1c1d7e749c044afc956c3
No-Try: True
Reviewed-on: https://webrtc-review.googlesource.com/100524
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24878}
This CL removes killswitches for code that has been properly tested in
experiments and is to be considered to be permanent.
The changes have been tested for bitexactness.
Bug: webrtc:8671
Change-Id: I0f9db16f377390d9dd3779096da91f3abc0fb4a5
Reviewed-on: https://webrtc-review.googlesource.com/102360
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24877}
Specially for devices with high echo path gain, even low render signal can allow the linear filter of the AEC3 to converge. However, the conditions that were used for updating the ERLE avoided to update that estimation. In this commit, we allow adapting the ERLE estimator using even low render signal but the update of the ERLE is constraint in a way that decreases are not allowed.
Bug: webrtc:9776
Change-Id: Ic4331efcc47a0b05f394cdea9a88f336292de5a1
Reviewed-on: https://webrtc-review.googlesource.com/101641
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24859}
This reverts commit 3a9731ff2f.
Reason for revert: Seems to cause crashes in Chrome browser tests, see for example https://logs.chromium.org/logs/chromium/buildbucket/cr-buildbucket.appspot.com/8934487169011818016/+/steps/browser_tests__retry_with_patch_/0/logs/WebRtcBrowserTest.RunsAudioVideoWebRTCCallInTwoTabsOfferEcdsaAnswerEcdsa/0
Original change's description:
> Bug in histogram metric reporting.
>
> A (actually several weeks) while ago, we noticed an error with the
> WebRTC.Audio.Agc2.EstimatedNoiseLevel histogram. It always reported
> the value 0. Here is why:
>
> The histogram bins go from 0 to 100. But the value logged is dBFS. It is
> always less than or equal to 0. This CL changes the bins.
>
> Bug: webrtc:7494
> Change-Id: I45fd122e98f9396f9871bc965a708987bd1815f6
> Reviewed-on: https://webrtc-review.googlesource.com/101340
> Commit-Queue: Alex Loiko <aleloi@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24800}
TBR=saza@webrtc.org,aleloi@webrtc.org
Change-Id: I84883f73710b7e13aa90ee29b140acfc417f109f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:7494
Reviewed-on: https://webrtc-review.googlesource.com/101701
Reviewed-by: Niklas Enbom <niklas.enbom@webrtc.org>
Commit-Queue: Niklas Enbom <niklas.enbom@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24809}
Speeds up adaptation of the matched filter of the delay estimator by
allowing the estimated echo and the error signal (microphone minus
estimated echo) to be saturated. Only microphone saturation pauses
the filter adaptation.
Bug: webrtc:9773
Change-Id: I8b8400539fde3ee821f36a95818bece02ddd626b
Reviewed-on: https://webrtc-review.googlesource.com/101341
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24802}
A (actually several weeks) while ago, we noticed an error with the
WebRTC.Audio.Agc2.EstimatedNoiseLevel histogram. It always reported
the value 0. Here is why:
The histogram bins go from 0 to 100. But the value logged is dBFS. It is
always less than or equal to 0. This CL changes the bins.
Bug: webrtc:7494
Change-Id: I45fd122e98f9396f9871bc965a708987bd1815f6
Reviewed-on: https://webrtc-review.googlesource.com/101340
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24800}
Right after a volume decrease, the echo path estimate is overestimated and, as a side effect, the nearend signal is also overestimated. Due to that, the suppression gains are kept high avoiding the suppression of echoes. In this CL the neared power spectrum estimation is limited to a level given by the power spectrum or the microphone input signal. Additionally, the minimum gain that is computed inside the suppressor is also modified. Instead of using the nearend power spectrum that is now bounded, the power spectrum of the signal after the linear echo canceler is used.
Bug: webrtc:9762
Change-Id: Ia24cd2ce248f2c2ba124711b75acff3b8c5cfa9f
Reviewed-on: https://webrtc-review.googlesource.com/100720
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24796}
Replace calls to .str() which copies with .Release which moves in cases where that's safe.
This CL was generated by this command:
git grep -l 'StringBuilder' |
xargs perl -i -0 -pe "s/(rtc::StringBuilder (\S+);.*?return )\\g2.str\(\)/\$1\$2.Release\(\)/sg"
Bug: webrtc:8982
Change-Id: If4dadbeb039df010aaaa9e58da81c1971a84fe8f
Reviewed-on: https://webrtc-review.googlesource.com/100307
Commit-Queue: Jonas Olsson <jonasolsson@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24790}
Original CL:
https://webrtc-review.googlesource.com/c/src/+/97603
- Changes EchoCancellationImpl to inherit privately from
EchoCancellation.
- Removes usage of AudioProcessing::echo_cancellation() inside most of
the audio processing module and unit tests.
- Default-enables metrics collection in AEC2.
The CL breaks audioproc_f backwards compatibility: It can no longer
use all recorded settings (drift compensation, suppression level), but
prints an error message when such settings are encountered.
Revert CL:
https://webrtc-review.googlesource.com/c/src/+/100305
Bug: webrtc:9535
TBR: gustaf@webrtc.org
Change-Id: I9248046b3a6a82df6221e502481836948643a991
Reviewed-on: https://webrtc-review.googlesource.com/100461
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24749}
This CL:
-Adds the option to log the aec3 parameters used for a simulation.
-Cleans up the logging of the custom setting of aec3 parameters to
instead rely on the newly added logging.
Bug: webrtc:8671
Change-Id: If73a73d08e5a5077416033ded598a83fb1ade3e0
Reviewed-on: https://webrtc-review.googlesource.com/100381
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24742}
The test is refitted to use the AudioProcessingStats struct to get
reference data.
The old metrics do not map entirely injectively to the new ones, so the
reference protobuf and files are updated as well.
Bug: webrtc:9535
Change-Id: I546dca2979380e03895af0077bfc77ffd24abe36
Reviewed-on: https://webrtc-review.googlesource.com/100100
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24740}
This reverts commit 1a03960e63.
Reason for revert: breaks downstream projects.
Original change's description:
> Remove APM internal usage of EchoCancellation
>
> This CL:
> - Changes EchoCancellationImpl to inherit privately from
> EchoCancellation.
> - Removes usage of AudioProcessing::echo_cancellation() inside most of
> the audio processing module and unit tests.
> - Default-enables metrics collection in AEC2.
>
> This CL breaks audioproc_f backwards compatibility: It can no longer
> use all recorded settings (drift compensation, suppression level), but
> prints an error message when such settings are encountered.
>
> Some code in audio_processing_unittest.cc still uses the old interface.
> I'll handle that in a separate change, as it is not as straightforward
> to preserve coverage.
>
> Bug: webrtc:9535
> Change-Id: Ia4d4b8d117ccbe516e5345c15d37298418590686
> Reviewed-on: https://webrtc-review.googlesource.com/97603
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24724}
TBR=gustaf@webrtc.org,saza@webrtc.org
Change-Id: Ifdc4235f9c5ee8a8a5d32cc8e1dda0853b941693
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9535
Reviewed-on: https://webrtc-review.googlesource.com/100305
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24729}
This CL:
- Changes EchoCancellationImpl to inherit privately from
EchoCancellation.
- Removes usage of AudioProcessing::echo_cancellation() inside most of
the audio processing module and unit tests.
- Default-enables metrics collection in AEC2.
This CL breaks audioproc_f backwards compatibility: It can no longer
use all recorded settings (drift compensation, suppression level), but
prints an error message when such settings are encountered.
Some code in audio_processing_unittest.cc still uses the old interface.
I'll handle that in a separate change, as it is not as straightforward
to preserve coverage.
Bug: webrtc:9535
Change-Id: Ia4d4b8d117ccbe516e5345c15d37298418590686
Reviewed-on: https://webrtc-review.googlesource.com/97603
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24724}
This CL fixes a bug in the filter output transition when the 'from' input
points to the same array as the output. It also includes a slight
improvement to the transition by starting one sample earlier than
previously.
Bug: webrtc:9741,chromium:882789
Change-Id: Ifd5f16c1ac88a74d93499e7f4b4c0e5cb3e4976f
Reviewed-on: https://webrtc-review.googlesource.com/99540
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24683}
Added back the 'agc2 level estimation' flag. Also added a flag for
moving the level measurement before AEC and NS. This is to run offline
experiments with audioproc_f.
Bug: webrtc:7494
Change-Id: I3e3ffceede7166b754130be2b707b620ba527e9f
Reviewed-on: https://webrtc-review.googlesource.com/97442
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24657}
This CL adjusts the behavior of the AEC3 echo suppressor behavior
initially in the call, and when there has been delay changes. The
results is that short echo blips/bursts present in some such cases
no longer occur.
In particular this CL:
-Ensures that the suppressor back-off under stationary render
conditions does not occur until the linear filter has had the
ability to converge.
-Ensures that a previously converged filter behavior detection
is not sticky for stable and linear echo paths, which in turn
prevents echo leakage due to the more liberal echo suppressor
behavior applied on such platforms.
-Removes a bug that caused a random and jittery behavior for
the usage of the linear filter output initially in the calls
and after echo path changes
Bug: webrtc:9737, chromium:882396
Change-Id: Id2b46e366dc58ab8137f19ed59a2034c89ca3087
Reviewed-on: https://webrtc-review.googlesource.com/99063
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24656}
Also read and apply settings when parsing and replaying dumps.
The implementation contains
* an extra field in debug.proto for the runtime settings
* code in AudioProcessingImpl to initiate the logging of the RS to the
AecDump
* code in aec_dump/ to log the RS in the AecDump
* code in test/ for re-playing the RS. E.g. for APM simulation with
audioproc_f.
Bug: webrtc:9138
Change-Id: Ia2a00537c2eb19484ff442fbffd0b95f8495516f
Reviewed-on: https://webrtc-review.googlesource.com/70502
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24647}
This CL introduces a new behavior for leveraging early information
about the delay that is acquired before the standard delay estimate
has been established.
To simplify the process of setting the parameters for that, the CL
also surfaces the delay estimator parameters to the config struct.
Bug: webrtc:9720,chromium: 880686
Change-Id: If886813f70cd805bd37752c63913d28398f1c6fe
Reviewed-on: https://webrtc-review.googlesource.com/97860
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24614}
This CL replaces std::o?stringstream with rtc::StringBuilder where that's possible to do without changing any of the surrounding code. It also updates includes and build files as appropriate.
The CL was generated by running 'git grep -l -P std::o?stringstream | xargs perl -pi -e "s/std::o?stringstream/rtc::StringBuilder/g"'. Then I've manually updated the #includes and BUILD files, run 'git cl format' and unstaged any file that would need more complex fixes.
Bug: webrtc:8982
Change-Id: Ibc32153f4a3fd177e260b6ad05ce393972549357
Reviewed-on: https://webrtc-review.googlesource.com/98460
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Jonas Olsson <jonasolsson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24605}
This CL enables -Wexit-time-destructors and -Wglobal-constructors on
rtc_static_library and rtc_source_set build targets.
It also adds the possibility to suppress these warnings because
they trigger in a few places.
The long term goal is to avoid regressions on this and remove all the
suppressions.
Bug: webrtc:9693
Change-Id: I4c1ecc137ef9e87ec5e66981ce95d96fb082727c
Reviewed-on: https://webrtc-review.googlesource.com/98380
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24604}
This was done by
* adding an EchoMetric class to EvaluationScore
* passing an echo metric binary path from the cmd arguments to the
EvaluationScoreWorkerFactory
* passing the render input filepath to the Evaluator.
The echo score is supposed to be computed by the provided binary. It
should print the echo score in [0.0, 1.0] to a text file. It should
satisfy the cmd flags in its invocation in EchoMetric._Run()
Bug: webrtc:7494
Change-Id: I397013d6ed17659ea01d0623d98a14d4fcdcc161
Reviewed-on: https://webrtc-review.googlesource.com/97022
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24537}
This CL introduces the ability to control the usage of the shadow filter
output in the echo canceller output.
Bug: webrtc:9694,chromium:879451
Change-Id: I01f90de60de1799b32892051c176bda5e1a8d33e
Reviewed-on: https://webrtc-review.googlesource.com/97020
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24506}
The intelligibility enhancer is always disabled and it is the only non-test
target using the lapped transform in common_audio (which we planned to remove).
Bug: webrtc:9689, webrtc:5298
Change-Id: Ida65d3aa11ac366471e7e5cbc053108b376c67d8
Reviewed-on: https://webrtc-review.googlesource.com/96460
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24504}
CustomAudioAnalyzer is an interface of a component into APM that
reads AudioBuffer without changing it.
The APM sub-module is optional. It operates in full band.
As described in the comments, it is an experimental interface which
may be changed in the nearest future.
Change-Id: I21edf729d97947529256407b10fa4b5219bb2bf5
Bug: webrtc:9678
Reviewed-on: https://webrtc-review.googlesource.com/96560
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Valeriia Nemychnikova <valeriian@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24481}
During this work a parameter is added to the configuration file for the AEC3 that allows to enable or disable the use of a different ERLE estimation for the render onsets.
Bug: webrtc:9677
Change-Id: I467f2cd20683fee06b69c0ba51a90816c9e14f29
Reviewed-on: https://webrtc-review.googlesource.com/96082
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24470}
- Changes in the early reverberation estimation.
- Code optimization by avoiding squaring the whole impulse response.
Bug: webrtc:9651
Change-Id: Iefd4f5ad52a2584d21b20934db1fae5cb1bc81ed
Reviewed-on: https://webrtc-review.googlesource.com/95483
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24464}
Disables the faster filter adaptation in the event of
microphone gain changes as it sometimes impacted transparency
negatively.
Bug: webrtc:9526,chromium:863826
Change-Id: I48fb6dd45440518aaf94b6469d6bb891247ea4ab
Reviewed-on: https://webrtc-review.googlesource.com/95143
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24461}
Removing the some kill switches from the AEC3 codebase. CL is tested for
bit exactness.
Bug: webrtc:8671
Change-Id: I6ecdb1b5ccb05dca79bf0a0cd471f53d79d71d7e
Reviewed-on: https://webrtc-review.googlesource.com/96181
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24460}
When FixedGainController::SetGain() is called first on a large value (e.g., 40 dB)
and afterwards on a smaller one (e.g., 0 dB), the limiter used by FixedGainController
takes time (about 10-20 seconds) to converge. During that period, the audio is not
audible and the volume slowly increases.
Even if switching from 40 dB to 0 dB is unlikely, this behavior can be corrected by
resetting the limiter every time that FixedGainController::SetGain() is called.
This eliminates the undesired effect described above even when the transient is short.
Bug: webrtc:7494
Change-Id: I419b8986d2181448b4671cdbbd1c256dfb460216
Reviewed-on: https://webrtc-review.googlesource.com/94902
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24451}
This CL adds adaptive handling of platforms where the echo path has
a strong gain above 10 kHz. A configurable offset is adaptively applied
depending on the amount of echo and mode of the echo suppressor.
Bug: webrtc:9663
Change-Id: I27dde6dc23b04a76a3be8c49d7fc9e226b9137e6
Reviewed-on: https://webrtc-review.googlesource.com/95947
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24448}
Disable the use of ERLE uncertainty with a diverged filter as it has
been shown to make transparency worse.
Bug: webrtc:9668
Change-Id: I5e23665def187c0d1cf47a029c4ebc950e79bb44
Reviewed-on: https://webrtc-review.googlesource.com/96140
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24446}
This CL allows selecting an echo suppressor behavior which is specific
for whether the nearend is dominant, or the echo is dominant.
The changes in this CL are bitexact.
Bug: webrtc:9660
Change-Id: Ie32e65efe47e692de6d6a22a7ad3b469d745fd6b
Reviewed-on: https://webrtc-review.googlesource.com/95725
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24434}
The AGC2 is enabled by flipping
AudioProcessing::Config::GainController2::enabled. The flag enables
both AdaptiveAgc and FixedGainController. Before this CL, there was no
way(*) to only enable the FixedGainController. After this CL, it's
also possible to flip the setting
|AudioProcessing::Config::GainController2::adaptive_digital_mode|. The
default is |true|, which is the previous behavior.
* Except for instantiating and setting it up outside of the APM like
it's done in the AudioMixer.
Bug: webrtc:7494
Change-Id: I506e93b6687221ac467f083fa8db3d45c98c1b83
Reviewed-on: https://webrtc-review.googlesource.com/95426
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24432}
This CL removes the UpdateGainIncrease code that is not used anymore.
The CL has been tested for bit exactness.
Bug: webrtc:8671
Change-Id: I4fcf26c3b4b5bba760ee139416ddefac86a36c2e
Reviewed-on: https://webrtc-review.googlesource.com/95940
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24425}
This CL removes some of the unused code in the suppressor. The CL has
been tested for bit exactness.
Bug: webrtc:8671
Change-Id: I960f9445dfd109cf1d5790debb8758872b5b8d0d
Reviewed-on: https://webrtc-review.googlesource.com/95682
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24417}
This CL adds a quiet mode for audioproc_f and hooks up the verbose
output of the AEC3 settings read from the JSON input file to that.
Bug: webrtc:8671
Change-Id: I93bbd1efc6502649da7b2b3e9f7557e9c184b0ed
Reviewed-on: https://webrtc-review.googlesource.com/95700
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24416}
The introduction of the new AEC proxies caused audioproc_f to fail.
This CL corrects audioproc_f so that the AEC2 and AECM echo cancellers
are properly activated using the new AEC proxies.
Bug: webrtc:9535
Change-Id: I48b9deaad873aee597f56ebd33814420024e0d58
Reviewed-on: https://webrtc-review.googlesource.com/95645
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24405}
This CL removes the unused coherence computation from AEC3. This CL
only removes unused code, the output of AEC3 does not change.
Bug: webrtc:8671
Change-Id: Ie127c5ec64e29414f1e1570511d57a4d09fc9145
Reviewed-on: https://webrtc-review.googlesource.com/95650
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24403}
This CL adds functionality for applying an optional fixed delay in AEC3
to the capture signal
Bug: webrtc:9647
Change-Id: Id3b3f896bcf203e6611298dc804c3c80da9f1883
Reviewed-on: https://webrtc-review.googlesource.com/95142
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24399}
The introduction of the new AEC proxies caused audioproc_f to fail.
This CL corrects audioproc_f so that the AEC2 and AECM echo cancellers
are properly activated using the new AEC proxies.
Bug: webrtc:9535
Change-Id: I0e1462fa6e35944f7dbb02580f1db09401c8f7c8
Reviewed-on: https://webrtc-review.googlesource.com/95484
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24394}
This CL:
-Adds another config parameter that controls the duration of the initial
state.
-Adds reading of that parameter in audioproc_f from the json settings file.
-Adds missing reading of another parameter in audioproc_f from the json
settings file.
Bug: webrtc:8671
Change-Id: Ie6164c360492de5e6b0ade8838bbabe214560b5e
Reviewed-on: https://webrtc-review.googlesource.com/94621
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24360}
The introduction of the new AEC proxies caused audioproc_f to fail.
This CL corrects audioproc_f so that the AEC2 and AECM echo cancellers
are properly activated using the new AEC proxies.
Bug: webrtc:9535
Change-Id: I1be59a9277aad8f51765c26e34ab16b63bcaeb42
Reviewed-on: https://webrtc-review.googlesource.com/94774
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24340}
This CL lowers the margins in the AEC3 conservative mode to increase
the transparency when there are audio buffer issues, and during call
startup.
In particular, this CL adjusts the parameters and thresholds to
-Make the requirements for filter divergence more strict, to minimize
the transparency loss during minor filter divergence.
-Decrease the echo power uncertainty used during initial filter
convergence, to increase transparency after audio buffer issues.
-Deactivate the enforcement of conservative suppressor gain after
audio buffer.
Bug: webrtc:9641,chromium:875611
Change-Id: Ie171bb411f17a1e8661c291118debd334f65c74f
Reviewed-on: https://webrtc-review.googlesource.com/94776
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24333}
This allows clients to stop using the old pointer-to-submodule interfaces
for enabling/disabling AEC2 and AECM.
The legacy suppression level flag for AEC2 is not yet activated.
NoTry=TRUE
Bug: webrtc:9535
Change-Id: Ie2c3378d832a6b393aec656d96597f85e299f500
Reviewed-on: https://webrtc-review.googlesource.com/94771
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24328}
Some changes need access to both the APM interface and the AECs,
hence we can't make the changes inside the AECs themselves.
The proxies also make it easy to drop support for individual parts of the
interfaces one at a time.
Bug: webrtc:9535
Change-Id: I3398e1182157f7d8b1e4c455060b830b61c20dd9
Reviewed-on: https://webrtc-review.googlesource.com/94500
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24317}
The other modes are little-tested and nigh-unsupported.
Surrounding APM code is tuned for high suppression.
Both WebRtcVoiceEngine and Chrome default all usage to high
suppression.
Bug: webrtc:9535
Change-Id: Ic1a6bd90b86a994338addfef7f473132ab43092a
Reviewed-on: https://webrtc-review.googlesource.com/91865
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24313}
This will be hooked up in clients who need to keep using the moderate
suppression level in AEC2 until other tuning options are available.
Bug: webrtc:9535
Change-Id: I6c40898954d9c856f58bcea87271f4b98fa124de
Reviewed-on: https://webrtc-review.googlesource.com/94148
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24292}
We add 2 metrics for measuring applied digital gain to
AgcManagerDirect. We also add an applied gain and an estimated noise
metric to Agc2.
Chromium histogram CL is
https://chromium-review.googlesource.com/c/chromium/src/+/1170833
Bug: webrtc:7494
Change-Id: Ie40873f9e43bc7d34d8f5473cd73bd47eb84e855
Reviewed-on: https://webrtc-review.googlesource.com/93468
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24290}
The FixedGainController is used in two places.
One is the AudioMixer. There it's used to limit the audio level after
adding streams. The other is GainController2, where it's placed after
steps that could boost the audio level outside the allowed range.
We log metrics from the FGC. To avoid confusion, this CL makes the two
use cases log to different histograms.
Chromium histogram CL is
https://chromium-review.googlesource.com/c/chromium/src/+/1170833
Bug: webrtc:7494
Change-Id: I1abe60fd8e96556f144d2ee576254b15beca1174
Reviewed-on: https://webrtc-review.googlesource.com/93464
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24284}
This CL ensures that the linear echo prediction mode is not used
when the transparent mode is active.
TBR: saza@webrtc.org,gustaf@webrtc.org
Bug: webrtc:9612,chromium:873074
Change-Id: I25cda5226251df769b6524594ea8a2b78532aaec
Reviewed-on: https://webrtc-review.googlesource.com/93740
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24268}
This CL changes the AEC3 code to allow the main and shadow filters
to have different lengths.
Bug: webrtc:9614,chromium:873100
Change-Id: I3ec2861d496986610d5a73db5771bbe9b8bf7dcd
Reviewed-on: https://webrtc-review.googlesource.com/93465
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24265}
This CL makes the jump-starting of the shadow filter more extreme.
It furthermore utilizes this to allow the AEC to rely further, and
more quickly on its linear filter estimates.
The result is mainly increased transparency but also some
cases of fewer echo blips.
Bug: webrtc:9612,chromium:873074
Change-Id: I90f7cfbff9acb9d0c36409593afbf476e7a830d3
Reviewed-on: https://webrtc-review.googlesource.com/93461
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24264}
This CL ensures that the shadow filter is adapted at each block, which
avoids that a temporary filter length mismatch can occur between the
main and shadow filters.
Bug: webrtc:9602,chromium:872201
Change-Id: I651812b4e3b134c6c5e1fe3df5ab78dbdb5c1fb4
Reviewed-on: https://webrtc-review.googlesource.com/93000
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24253}
Any modification of the render stream now happens *before* the
echo detector enqueues render stream frames. In this way, there
is no impact of the render pre-processor on the echo likelihood
metric.
Bug: webrtc:9591
Change-Id: I9b5e339e892796a0d0cd072fdd45d35ec89d8802
Reviewed-on: https://webrtc-review.googlesource.com/93031
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24251}
This CL adds a flag to optionally disable the digital gain control in
ExperimentalAgc. With the flag, Experimental Agc (henceforth AGC1)
only controls the adaptive analog gain. This flag can be combined to
that which activates AGC2. That way, one can enable the hybrid AGC
configuration AGC1 analog only + AGC2 fixed+adaptive digital.
Previously, there was a flag "use_agc2_digital_adaptive" in
AgcManagerDirect. Our ambition was that to activate the hybrid mode
described above with this flag. The behavior of the flag was not
implemented.
To activate the hybrid mode after this CL, set
ExperimentalAgc::digital_adaptive_disabled=true and
AudioProcessing::Config::GainController2::enabled=true.
We also add flags for these settings in audioproc_f.
Then the required settings are currently
audioproc_f --agc2 1 --agc 1 --experimental_agc 1 \
--experimental_agc_disable_digital_adaptive 1 \
-i [INPUT]
Bug: webrtc:7494
Change-Id: Iea798dc3899cec83d30ba71caba787262fcaef41
Reviewed-on: https://webrtc-review.googlesource.com/89740
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24249}
Agc2 applies a digital gain to the nearend signal.
When the analog level changes, the digital gain calculation is no
longer valid. Therefore Agc2 should be notified to analog gain
changes.
This CL also allow audioproc_f to chain AGC1 and AGC2. In a dependent
CL we will allow using AGC1 for analog gain and AGC2 for digital
gain.
Bug: webrtc:7494
Change-Id: Id75b3728fbf2de1d84b7fba005e4670c7a2985d9
Reviewed-on: https://webrtc-review.googlesource.com/89387
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24231}
This CL adds functionality to use the shadow filter output instead
of the main filter output for cases when the former is better than
the latter. One case when that happens is when there have been an
echo path change, either in the acoustic path, in the audio buffers
or due to some active audio processing effects being applied on
the device.
The CL causes less echo leaks, in particular on devices with
active render processing.
Bug: webrtc:9581,chromium:869821
Change-Id: Icb8df1b94141598da82dc188051ac59e43338938
Reviewed-on: https://webrtc-review.googlesource.com/91820
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24166}
Protect from negative second moments, which are unexpected in TransientDetector::Detect
and may lead to invalid results.
Bug: chromium:866925
Change-Id: Id1d5b2ebb51e54d9d332b869c6f63dcd03cc461c
Reviewed-on: https://webrtc-review.googlesource.com/91164
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24153}
This CL introduces an adaptive estimation of the early reverb
in the estimation for the room reverberation. The benefits of
this is that for room with long early reflections there is
a lower risk of underestimating the reverberation.
This CL is for a landing the code in
https://webrtc-review.googlesource.com/c/src/+/87420,
and the review of the code was done in that CL. The author of
code is devicentepena@webrtc.org
Bug: webrtc:9479, chromium:865397
Change-Id: Id6f57e2a684664aef96e8c502e66775f37da59da
Reviewed-on: https://webrtc-review.googlesource.com/91162
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24146}
Related bug closed since half a year back.
Bug: webrtc:8665
Change-Id: I77007caaa97b5db04f5cf144323cac7a576a7fde
Reviewed-on: https://webrtc-review.googlesource.com/90872
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24135}
This CL increases the AEC3 transparency during call
startup and after echo path delay changes in 3 ways:
1. The exit requirements for the initial mode is
made less strict.
2. The requirements for using the linear echo model
are made less strict.
3. The duplicated reverb modelling in the linear mode
removed.
Bug: webrtc:9572,chromium:868329
Change-Id: I79ea0796ed26408e35576bb39eaae4e4848b4f83
Reviewed-on: https://webrtc-review.googlesource.com/90868
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24132}
This will be the one way of toggling AEC. The EchoControlMobile and
EchoCancellation interfaces will be removed.
The settings introduced here are not used yet, to allow for smooth
downstream fixes.
Bug: webrtc:9535
Change-Id: I3b1a524a0ab7daf63419d7e5ed47417b9282dbf6
Reviewed-on: https://webrtc-review.googlesource.com/90864
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24129}
This CL adds a functionality that jump-starts the
AEC3 shadow filter whenever it performs consistently
worse than the main filter.
The jump-start is done such that the shadow filter
is re-initialized using the main filter coefficients.
The effects of this is a significantly more accurate
main linear filter which leads to less echo leakage
and better transparency
Bug: webrtc:9565, chromium:867873
Change-Id: Ie0b23cd536adc7ce96fc3ed2a7db112aec7437f1
Reviewed-on: https://webrtc-review.googlesource.com/90413
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24117}
This CL corrects the way that the echo subtractor output is
adjusted during the adjustment of the adaptive filter when the
analog AGC gain changes.
The CL also ensures that the main adaptive filter is not updated
when this occurs.
Bug: webrtc:9561,chromium:867373
Change-Id: I636f936128f7d9f0d82ca4140b59f148eb35d6a4
Reviewed-on: https://webrtc-review.googlesource.com/90401
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24101}
All clients who do not own their own APM turn it off by default
(in WebrtcVoiceEngine). AECM with comfort noise is a little-exercised
code path. Configurability of this setting is going away, so we're
better off disabling it by default.
Bug: webrtc:9535
Change-Id: Iba839aa18e79ae29ff20bdf6e30de77870ba4143
Reviewed-on: https://webrtc-review.googlesource.com/89583
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24078}
This reverts commit 771b50ca0b.
Reason for revert: Introduces error-prone config.
Original change's description:
> Add one-stop-shop for built-in AEC toggling in APM
>
> This does not change what AEC functionality is available.
> However, a client that only uses this interface - and not the submodule
> pointer accessors - gets simpler code, and is guaranteed not to run any
> two AECs in tandem.
>
> The submodule interface EchoControlMobile is being deprecated in
> https://webrtc-review.googlesource.com/c/src/+/89392
>
> Bug: webrtc:9535
> Change-Id: Id9326074e566be6d8768010fc421c457beff402c
> Reviewed-on: https://webrtc-review.googlesource.com/89386
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24066}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: I43283a1b22538a4caa77313499989146b2ce67f1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9535
Reviewed-on: https://webrtc-review.googlesource.com/90060
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24067}
This does not change what AEC functionality is available.
However, a client that only uses this interface - and not the submodule
pointer accessors - gets simpler code, and is guaranteed not to run any
two AECs in tandem.
The submodule interface EchoControlMobile is being deprecated in
https://webrtc-review.googlesource.com/c/src/+/89392
Bug: webrtc:9535
Change-Id: Id9326074e566be6d8768010fc421c457beff402c
Reviewed-on: https://webrtc-review.googlesource.com/89386
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24066}
In AgcManagerDirect::UpdateGain(), Agc::GetRmsErrorDb() is
called. Depending on the result of that call, the analog gain may be
changed. After an analog gain change, the Agc should be reset, because
it's memory contains now invalid loudness levels.
The Agc in modules/audio_processing/agc/agc.cc resets itself at every
successful Agc::GetRmsErrorDb call. The AdaptiveModeLevelEstimatorAgc
does not. This change makes sure all Agcs are reset from
AgcManagerDirect.
It will cause some Agcs to be reset twice. This is fine, because
Agc::Reset() is cheap and idempotent.
Bug: webrtc:7494
Change-Id: Iee7495d699cbdb9d69b2ae0cb07034c6e2761e22
Reviewed-on: https://webrtc-review.googlesource.com/89040
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24054}
A 32-bit number overflows. It's then capped to compute a 16-bit value.
This CL introduces a 64-bit variable on which equivalent operations are
performed instead.
Bug: chromium:864883
Change-Id: I371af869c6586256b900356491f467bed357e11d
Reviewed-on: https://webrtc-review.googlesource.com/89584
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24041}
This CL removes //build/config/clang:find_bad_constructs from the
suppressed_configs list, which means that clang:find_bad_constructs
is now enabled on these translation units.
Bug: webrtc:9251
Change-Id: Ibdafc0bb08de1be7189af7053a67a24e3a26bd6b
Reviewed-on: https://webrtc-review.googlesource.com/89001
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23997}
This CL re-activates the explicit handling of microphone
gain changes in the AEC3 code. The implementation is done
beneath a kill-switch so that when that switch is active
the changes in this CL are bitexact.
Bug: webrtc:9526,chromium:863826
Change-Id: I58e93d8bc0bce7bec91e102de9891ad48ebc55d8
Reviewed-on: https://webrtc-review.googlesource.com/88620
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23986}
This CL refactors the code in AEC3 that analyzes how
well the adaptive filter performs. The purpose of this
is both to simplify code that is more complex than needed
and also to pave the wave for the upcoming CLs that
softens the echo suppression during doubletalk.
The main changes are that:
-The shadow adaptive filter is now never analyzed. This
turned out to never affect the output in the recordings
it was tested on.
-The convergence analysis was moved to the aec state
code.
The changes are bitexact on all testcases where they
have been tested on.
Bug: webrtc:8671
Change-Id: If76b669565325c8eb4d11d1178a7e20306da9a26
Reviewed-on: https://webrtc-review.googlesource.com/87430
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23958}
This CL changes a constant from an approximately correct limit
of 2^25.5.
The new limit is the largest x such that z = 10 satisfies:
((x >> z) + 1)^2 <= 2^31 - 1.
If gains[k + 1] > x, then z >= 11 and needs to be computed.
Bug: chromium:860638
Change-Id: If17f257dacd94806e59e4f32b345a5fb15b4e32b
Reviewed-on: https://webrtc-review.googlesource.com/87583
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23908}
This clarifies dependencies and makes it easier to customize builds
for different binaries.
Also adds BUILD files in aec/ and aecm/.
Moves unit tests to their own target, which subjects them to Chromium
Clang style checks.
The CL contains a fix for a thusly induced warning.
Bug: webrtc:9488
Change-Id: I77b680b42a4dccc5f025005e0890f60b4eaf2961
Reviewed-on: https://webrtc-review.googlesource.com/87304
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23887}
This CL does the following:
1. Adds a new AdaptiveModeLevelEstimatorAgc implementation of the Agc
interface. The new implementation differs from webrtc::Agc by
1. using the AGC2 speech level estimator in
GetRmsErrorDb. webrtc::Agc implements its own with help of
webrtc::LoudnessHistogram.
2. Doesn't forget its past at every GetRmsErrorDb call.
2. Makes AgcManagerDirect use AdaptiveModeLevelEstimatorAgc instead of
webrtc::Agc if the use_agc2_level_estimation flag is set.
Bug: webrtc:7494
Change-Id: I8df3f52e322d433eb5ce5297f4236af2f1877b04
Reviewed-on: https://webrtc-review.googlesource.com/86603
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23875}
Splits 'modules/audio_processing:audio_processing' target. The files
in modules/audio_processing/agc now are in targets in that folder.
Reason for doing this was to include
modules/audio_processing/agc/agc.h from another target in the
dependent CL https://webrtc-review.googlesource.com/c/src/+/86603
This could help reducing the binary size in the future.
Bug: webrtc:7494
Change-Id: I61f50ab6d5ce24d19f4097e0f3fa8b0170010887
Reviewed-on: https://webrtc-review.googlesource.com/87422
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23873}
This reverts commit e90879097c.
Reason for revert: breaking downstream projects
Original change's description:
> IWYU: Add <cmath> for fabsf() and powf(), switch to C++ versions
>
> Fix the build with libstdc++ after 496cedfe5 ("AEC3: Reverberation model:
> Changes on the decay estimation") by including the missing header:
>
> ../../modules/audio_processing/aec3/reverb_model_estimator.cc: In constructor ‘webrtc::ReverbModelEstimator::ReverbModelEstimator(const webrtc::EchoCanceller3Config&)’:
> ../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: error: ‘fabsf’ was not declared in this scope
> reverb_decay_(fabsf(config.ep_strength.default_len)),
> ^~~~~
> ../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: note: suggested alternative: ‘labs’
> reverb_decay_(fabsf(config.ep_strength.default_len)),
> ^~~~~
> labs
> ../../modules/audio_processing/aec3/reverb_model_estimator.cc: In member function ‘void webrtc::ReverbModelEstimator::UpdateReverbDecay(const std::vector<float>&)’:
> ../../modules/audio_processing/aec3/reverb_model_estimator.cc:206:15: error: ‘powf’ was not declared in this scope
> decay = powf(2.0f, -exp_candidate * kFftLengthBy2);
> ^~~~
>
> While here, also switch to the C++ versions of those functions: std::fabs()
> and std::pow() respectively.
>
> Spotted by Jose Dapena Paz <jose.dapena@lge.com>.
>
> Bug: chromium:819294
> Change-Id: Id803243be8dd17eac95c70a88a37ee2fe1505a5a
> Reviewed-on: https://webrtc-review.googlesource.com/87421
> Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#23870}
TBR=gustaf@webrtc.org,alessiob@webrtc.org,raphael.kubo.da.costa@intel.com,devicentepena@webrtc.org
Change-Id: I22423a2d4201183f70ae084e0e21930367824f1c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:819294
Reviewed-on: https://webrtc-review.googlesource.com/87401
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23871}
Fix the build with libstdc++ after 496cedfe5 ("AEC3: Reverberation model:
Changes on the decay estimation") by including the missing header:
../../modules/audio_processing/aec3/reverb_model_estimator.cc: In constructor ‘webrtc::ReverbModelEstimator::ReverbModelEstimator(const webrtc::EchoCanceller3Config&)’:
../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: error: ‘fabsf’ was not declared in this scope
reverb_decay_(fabsf(config.ep_strength.default_len)),
^~~~~
../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: note: suggested alternative: ‘labs’
reverb_decay_(fabsf(config.ep_strength.default_len)),
^~~~~
labs
../../modules/audio_processing/aec3/reverb_model_estimator.cc: In member function ‘void webrtc::ReverbModelEstimator::UpdateReverbDecay(const std::vector<float>&)’:
../../modules/audio_processing/aec3/reverb_model_estimator.cc:206:15: error: ‘powf’ was not declared in this scope
decay = powf(2.0f, -exp_candidate * kFftLengthBy2);
^~~~
While here, also switch to the C++ versions of those functions: std::fabs()
and std::pow() respectively.
Spotted by Jose Dapena Paz <jose.dapena@lge.com>.
Bug: chromium:819294
Change-Id: Id803243be8dd17eac95c70a88a37ee2fe1505a5a
Reviewed-on: https://webrtc-review.googlesource.com/87421
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23870}
Fix the build with libstdc++ after 496cedfe5 ("AEC3: Reverberation model:
Changes on the decay estimation") by including the missing header:
../../modules/audio_processing/aec3/reverb_model_estimator.cc: In constructor ‘webrtc::ReverbModelEstimator::ReverbModelEstimator(const webrtc::EchoCanceller3Config&)’:
../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: error: ‘fabsf’ was not declared in this scope
reverb_decay_(fabsf(config.ep_strength.default_len)),
^~~~~
../../modules/audio_processing/aec3/reverb_model_estimator.cc:61:21: note: suggested alternative: ‘labs’
reverb_decay_(fabsf(config.ep_strength.default_len)),
^~~~~
labs
../../modules/audio_processing/aec3/reverb_model_estimator.cc: In member function ‘void webrtc::ReverbModelEstimator::UpdateReverbDecay(const std::vector<float>&)’:
../../modules/audio_processing/aec3/reverb_model_estimator.cc:206:15: error: ‘powf’ was not declared in this scope
decay = powf(2.0f, -exp_candidate * kFftLengthBy2);
^~~~
Spotted by Jose Dapena Paz <jose.dapena@lge.com>.
Bug: chromium:819294
Change-Id: If992e5e473b9d4d0c1b3c1006c3816b7c4eee296
Reviewed-on: https://webrtc-review.googlesource.com/87241
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Raphael Kubo da Costa (rakuco) <raphael.kubo.da.costa@intel.com>
Cr-Commit-Position: refs/heads/master@{#23863}
This clarifies the dependencies of utility/ a lot (spoiler:
there are very few) and makes it easier to separate the build
targets for aecm and aec2.
Bug: webrtc:9488
Change-Id: If916f86e80c19d1b650d0908fbe8343ea7c47bd7
Reviewed-on: https://webrtc-review.googlesource.com/87141
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23860}
The main filter is adapted at a lower rate which reduces the risk of
diverging during double talk. The change yields notable transparency
improvements.
Bug: webrtc:9497
Change-Id: Ib23b7a4055d313dede535d2b65dc7e023a2db042
Reviewed-on: https://webrtc-review.googlesource.com/87300
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23858}
In this CL we have introduced changes on the estimation of the decay involved in the exponential modeling of the reverberation. Specifically, the instantaneous ERLE has been tracked and used for adapting faster in the regions when the linear filter is performing well. Furthermore, the adaptation is just perform during render activity.
Change-Id: I974fd60e4e1a40a879660efaa24457ed940f77b4
Bug: webrtc:9479
Reviewed-on: https://webrtc-review.googlesource.com/86680
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23836}
This change simplifies the calculation of the suppression gains.
It also contains a new tuning of the suppressor.
The suppressor behavior is tuned by setting echo-to-nearend ratios
for when the suppressor is to be fully transparent and for when to
fully suppress. An echo-to-masker value determines when the signal
is masked by noise. These three values are specified for low and
high frequencies.
Change-Id: I108e83c8f2a35462085a3fabaebcc02fa3103607
Bug: webrtc:9482
Reviewed-on: https://webrtc-review.googlesource.com/86021
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23830}
Much like https://bugs.chromium.org/p/chromium/issues/detail?id=855900,
the int32 gain table isn't always small enough for plain multiplication
with an int16.
This appears fixable through regular fixed-point arithmetic (multiply
out[i][n] by integer and fractional part of gain separately), but it's
less readable.
Bug: chromium:858989
Change-Id: Ie5aac25fd0cca4e51858cba69bde06c54a5d31bf
Reviewed-on: https://webrtc-review.googlesource.com/86602
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23815}
1. Adds support for Reset calls in AGC2. The AGC will be reset during
analog gain changes.
2. Allows AdaptiveModeLevelEstimator to return estimates > 0. This can
happen if the signal gain is too high. It's needed for letting the
analog AGC know that the gain is too high.
Bug: webrtc:7494
Change-Id: I38def17c21cc01c36aaea79a2401d8c2f289407b
Reviewed-on: https://webrtc-review.googlesource.com/79360
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23805}
This CL adds two flags to audioproc_f. The flags control
AgcManagerDirect. The flags are
'--experimental_agc_agc2_level_estimator' and
'--experimental_agc_agc2_digital_adaptive'.
After this CL, the flags are be applied to AgcManagerDirect. The flags
have no effect in release-mode. They cause a crash in debug-mode.
In an upcoming CL, '--experimental_agc_agc2_level_estimator 1' will
replace the speech level estimation in ExperimentalAgc with that of
AGC2.
'--experimental_agc_agc2_digital_adaptive 1' will replace the digital
gain selection and application with that of AGC2.
These audioproc_f will activate both new settings:
./out/Target/audioproc_f --agc 1 --experimental_agc 1
--experimental_agc_agc2_digital_adaptive 1
--experimental_agc_agc2_level_estimator 1 --simulate_mic_gain 1
--simulated_mic_kind 2
See also https://webrtc-review.googlesource.com/c/src/+/79360
Bug: webrtc:7494
Change-Id: If0e65893dffdddb312e553787b8cedaf9a334323
Reviewed-on: https://webrtc-review.googlesource.com/86548
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23802}
The AGC submodule of APM changes analog gain. These gain changes are
typically ignored by the test tool audioproc_f.
There is an option of the test tool to take action on the gain
changes. It's the '--simulate_mic_gain' option. The option converts
the analog gain to a digital gain. The digital gain is applied to the
capture stream.
This change adds a new simulated microphone kind. The new microphone
has a gain curve defined by
modules/audio_processing/agc/gain_map_internal.h. That gain curve
defines how AGC1 expects a microphone to behave.
Bug: webrtc:7494
Change-Id: Ifb3f54a8c6f8c001a711fa977f39f32413069780
Reviewed-on: https://webrtc-review.googlesource.com/86128
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23801}
We dump the compression level from AgcManagerDirect.
We use the same names and structure as in
GainControlForExperimentalAgc.
This is to get Apm dump file names to match in the upcoming AGC
changes: https://webrtc-review.googlesource.com/c/src/+/79360
TBR: alessiob@webrtc.org
Bug: webrtc:7494
Change-Id: I1e6260ea48ffc43f709e4b0c97f843ad9c3d1824
Reviewed-on: https://webrtc-review.googlesource.com/86546
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23800}
In this work the performance of the linear filter is
estimated. The estimation aims at capture situations when the linear
filter is largely over-estimating the echo. In those circumstances,
the linear filter is scaled with the purpose of accelerating its
convergence.
Change-Id: I05ea3739d82838a6f08673432da92125c47943e0
Bug: webrtc:9466,chromium:857426
Reviewed-on: https://webrtc-review.googlesource.com/86133
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23789}
This CL removes the constraint that freezes the filter adaptation
whenever the estimated echo or the prediction error is saturated. This
allows for much more rapid filter recovery in cases where the echo path
gain for some reason changes, such as when the analog AGC gain is
adjusted or the loudspeaker volume is changed.
TBR: devicentepena@webrtc.org
Bug: webrtc:9466,chromium:857426
Change-Id: Ic0b3b03f41f12e9a607aaadd2ee91cbaa16cac52
Reviewed-on: https://webrtc-review.googlesource.com/86124
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23775}
This CL changes the behavior when the main filter diverges.
Instead of entering non-linear mode, the AEC continues to operate in
linear mode but estimates the residual echo differently. R2 is S2
scaled by a factor of 10.
Bug: chromium:857018,webrtc:9462
Change-Id: I41212efe164ad319cf38a163cdf9d3ea151e0997
Reviewed-on: https://webrtc-review.googlesource.com/85981
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23772}
The frequency shape of the echo path has been included in the reverberation model.
Bug: webrtc:9454,chromium:856636
Change-Id: Id2bc3096df31e29328936f94fe965ed1883d70f7
Reviewed-on: https://webrtc-review.googlesource.com/85370
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23746}
common_audio/fft4g.c is third party codem that have to be moved into
third_party folder, so to be able to do it at first we have to extract
it into separate target. It is extracted with corresponding header file
and will be moved in futher CL.
Bug: webrtc:8366
Change-Id: I586ca94d4e9242c23163b987fa334dfa705020ed
Reviewed-on: https://webrtc-review.googlesource.com/85372
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Artem Titov <titovartem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23742}
This CL removes the remaining beamformer parts from the APM.
Bug: webrtc:9402
Change-Id: I9ab2795bd2813d17166ed0925125257b82d98a74
Reviewed-on: https://webrtc-review.googlesource.com/83340
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23694}
* Move 'VadWithLevel' to AGC2 where it belongs.
* Remove the vectors from VadWithLevel. They were there to make it work
with modules/audio_processing/vad, which we don't need any longer.
* Remove the vector handling from AGC2. It was spread out across
AdaptiveDigitalGainApplier, AdaptiveAGC and their unit tests.
* Hack the RNN VAD into VadWithLevel. The main issue is the resampling.
Bug: webrtc:9076
Change-Id: I13056c985d0ec41269735150caf4aaeb6ff9281e
Reviewed-on: https://webrtc-review.googlesource.com/77364
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23688}
GainControlImpl was inited with two refs to the APM capture lock. As a
result, it could modify member vars without holding the render
lock. The Process and Analyze calls are not affected, because they are
made from audio_processing_impl when APM holds both locks.
Bug: webrtc:9354
Change-Id: I814b69602280921dda9dc45ffcbddb38de4a3394
Reviewed-on: https://webrtc-review.googlesource.com/84182
Reviewed-by: Max Morin <maxmorin@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23677}
Running clang-format with chromium's style guide.
The goal is n-fold:
* providing consistency and readability (that's what code guidelines are for)
* preventing noise with presubmit checks and git cl format
* building on the previous point: making it easier to automatically fix format issues
* you name it
Please consider using git-hyper-blame to ignore this commit.
Bug: webrtc:9340
Change-Id: I694567c4cdf8cee2860958cfe82bfaf25848bb87
Reviewed-on: https://webrtc-review.googlesource.com/81185
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23660}
Reduce noise of the nearend spectrum estimation by averaging multiple
frames.
Bug: webrtc:9420,chromium:853699
Change-Id: Iad7e68b1209a369e263b2d892791943e42bfbb3f
Reviewed-on: https://webrtc-review.googlesource.com/83960
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23655}
This is a no-op change because rtc::Optional is an alias to absl::optional
This CL generated by running script with parameter 'modules/audio_processing'
find $@ -type f \( -name \*.h -o -name \*.cc \) \
-exec sed -i 's|rtc::Optional|absl::optional|g' {} \+ \
-exec sed -i 's|rtc::nullopt|absl::nullopt|g' {} \+ \
-exec sed -i 's|#include "api/optional.h"|#include "absl/types/optional.h"|' {} \+
find $@ -type f -name BUILD.gn \
-exec sed -r -i 's|"(../)*api:optional"|"//third_party/abseil-cpp/absl/types:optional"|' {} \+;
git cl format
Bug: webrtc:9078
Change-Id: Id29f8de59dba704787c2c38a3d05c60827c181b0
Reviewed-on: https://webrtc-review.googlesource.com/83982
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23653}
This removes beamformer references from audioproc_f, some non-beamformer tests, and a few other bits and bobs.
The beamformer is, after this, very decoupled from the remaining APM code.
Bug: webrtc:9402
Change-Id: Iaafc95517013d7a17723ef2329f17b5e09069bc9
Reviewed-on: https://webrtc-review.googlesource.com/83983
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23649}
Removes the usage of an injected/enabled beamformer in APM, and marks
the API parts as deprecated.
Initialization and process calls are removed, and all enabled/disabled
flags are replaced by assuming no beamforming. Additionally, an AGC test
relying on the beamformer as a VAD is removed.
Bug: webrtc:9402
Change-Id: I0d3d0b9773da083ce43c28045db9a77278f59f95
Reviewed-on: https://webrtc-review.googlesource.com/83341
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23643}
The echo detector is currently stored as a unique_ptr, but when injecting an echo detector, a scoped_refptr makes more sense since the ownership will be shared.
Bug: webrtc:8732
Change-Id: I2180014acb84f1cd5c361864a444b7b6574520f5
Reviewed-on: https://webrtc-review.googlesource.com/83325
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23610}
In this work we introduce some changes on how the reverberation model for AEC3 is applied. Currently, the exponential modelling of the tails is applied over the linear echo estimates. That might result in an overestimation of the reverberation tails under certain conditions. In this work, the reverberation model is instead applied over an estimate of the energies at the tails of the linear estimate.
Additionally, the stationary estimator is changed so it does not disable the aec immediately after a burst of activity.
Bug: webrtc:9384,webrtc:9400,chromium:852257
Change-Id: Ia486694ed326cfe231fc688877c0b9b6e2c450ff
Reviewed-on: https://webrtc-review.googlesource.com/82161
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23599}
This CL ensures that the linear-filter based refined delay is chosen to
match the delay that was detected by the delay estimator during the time
it takes for the linear filter to converge.
Bug: webrtc:9371,chromium:850451
Change-Id: Ib9cf532df0577ceca10a260d9d2deba5306f88bb
Reviewed-on: https://webrtc-review.googlesource.com/81682
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23537}
This filter preprocess the time domain representation of the adaptive
linear filter to avoid low-frequency components causing issues in
the filter analysis.
Bug: webrtc:9343, chromium:848231
Change-Id: I40494959f1b76242a7c9f2a2fc85c2ad4af9e164
Reviewed-on: https://webrtc-review.googlesource.com/79142
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23536}
This change contains a new anti-aliasing filter for the delay estimator
for down-sampling factor 4. The new (elliptic) filter has a much wider
main lobe allowing for faster convergence.
Bug: webrtc:9288,chromium:846615
Change-Id: Id109974a59fe6f48c5e0ccc4f4e06c0d94c8bd03
Reviewed-on: https://webrtc-review.googlesource.com/81680
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23534}
Preparing for changing the filters of the decimator by moving the old
filters to the new zero, pole, gain notation.
Bug: webrtc:9288,chromium:846615
Change-Id: I2b01a2555d34617e0bf251c782703753f72cd56f
Reviewed-on: https://webrtc-review.googlesource.com/81189
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23528}
The signal used for delay estimation at downsampling factor 8 is bandpass
filtered and contains less energy than for other downsampling factors.
This CL adjusts the energy threshold used for determining if there is enough
farend activity to update the matched filters in the delay estimator.
Only downsampling factor 8 is affected.
Bug: webrtc:9288,chromium:846615
Change-Id: I6f38f5609a31e7a08e60571ac75ea75c9962e026
Reviewed-on: https://webrtc-review.googlesource.com/80443
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23486}
CascadedBiQuadFilter can run identical filters multiple times. This CL
allows the use of different filters in each step. This enables the use
of more elaborate filters. The filters are defined by zeros, poles and
gains.
The 'old' way of initializing CascadedBiQuadFilter with a transfer
function and number of filters is left intact.
Bug: webrtc:9288,chromium:846615
Change-Id: Ie4a5b98eba044415571cdcac087b20870a0b5d33
Reviewed-on: https://webrtc-review.googlesource.com/80060
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23473}
In this work, we change the behavior of the gain limiter so it also looks at the energy
on farend around the default delay for deciding the suppression gain
that should be applied at the initial portion of the call.
Bug: webrtc:9311,chromium:846724
Change-Id: I0b777cedbbd7fd689e72070f72237296ce120d3c
Reviewed-on: https://webrtc-review.googlesource.com/78960
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23400}
Letting the delay estimator operate at a sampling frequency of 2 kHz
with audio between 0 and 1 kHz makes it sensitive to noisy environments.
This CL bandpass filters the 16 kHz signal before downsampling to 2 kHz
in a way that the downsampled 2 kHz signal contains audio between 1 and
2 kHz. It also sets downsampling factor 8 as default which significantly
reduces computational complexity.
Bug: webrtc:9288,chromium:846615
Change-Id: Iaf67898a1a14326cd61bb7f81c14d3c12a697c8d
Reviewed-on: https://webrtc-review.googlesource.com/78703
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23395}
Code using the macro change to a plain declaration+init of a local
variable.
Also delete includes of <stdint.h> and <stddef.h> from basictypes.h.
Bug: webrtc:6853
Change-Id: I5ffceb449c1bf8f5badb595d5a343a47b0c6deae
Reviewed-on: https://webrtc-review.googlesource.com/78460
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23377}
This CL fixes the rounding of the estimated average call skew. Before it
was rounded down (toward INT_MIN). Now it is rounded to the nearest integer.
This avoids unnecessary fluctuations of the estimated call skew (and
unnecessary resets).
Bug: webrtc:9283,chromium:888042
Change-Id: Id5b3c593f812f5f9fd3dcdafb7e388a6ef1ac153
Reviewed-on: https://webrtc-review.googlesource.com/77684
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23338}
This is a kitchen-sink header, some pieces should be moved to
byteorder.h, the rest likely deleted.
Delete most includes of basictypes.h. In leaf headers,
include stddef.h and stdint.h explicitly where needed.
Bug: webrtc:6853
Change-Id: Ibc809936a8f94d418e4eb650da1e89c1b9142073
Reviewed-on: https://webrtc-review.googlesource.com/77721
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23333}
The ERLE computation was improved by two means:
- The update function was always called and just parts of the internal code reacts to the converged filter flag
- When computing the ERLE, the ratio of energies is now computed using more points and, therefore, a more robust estimation is achieved.
Bug: webrtc:9284
Change-Id: Ie4f871f19cfad1a13741352ddd7b0a27ad6c3fb6
Reviewed-on: https://webrtc-review.googlesource.com/77767
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23329}
This CL applies a high pass filter to the delay estimator signals which
improves the adaptation of the matched filters in noisy environments.
This results in faster delay estimation.
Bug: webrtc:9288
Change-Id: I8ffe5442eab7ac2f10a7ba236b08a0f07ec90645
Reviewed-on: https://webrtc-review.googlesource.com/77725
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23308}
This CL increases the allowed variations in the API call skew limit in
AEC3.
Bug: webrtc:9283,chromium:888042
Change-Id: Ib5e784c6f3dcf1bf3a2cbfe2b1559953db9227a8
Reviewed-on: https://webrtc-review.googlesource.com/77430
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23305}
This CL turns on the previously implemented AEC3 audibility
improvements, which before has been off by default.
Bug: webrtc:9193,chromium:836790
Change-Id: Ibcd057ba5dd002718d62fd83db33d01d9563b8ea
Reviewed-on: https://webrtc-review.googlesource.com/77123
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23265}
Merges the two targets in modules/audio_processing
and removes some redundant code. This enables not writing
a bunch of redundant code in
https://webrtc-review.googlesource.com/c/src/+/70502
':audio_processing' did depend on ':aec_dump_interface'.
'modules/audio_processing/aec_dump' did depend on
'aec_dump_interface' but not ':audio_processing'.
Having the AecDump implementation not depending on
'audio_processing' allows to have faster compilation time and
reduces the dependencies. However, maintaining such a decoupling
makes APM and AecDump client code more complex.
NOTRY=true # want this in and 'ios_api_framework' seems stuck.
Bug: webrtc:7404
Change-Id: I75a5f234591014ac42d52bc1a36526072f5be89c
Reviewed-on: https://webrtc-review.googlesource.com/76603
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23244}
CustomProcessing is the interface to injectable audio processing
submodules to AudioProcessing. This CL makes it possible to set
runtime settings on the injected render processing component.
Note that the current runtime setting handling happens on the capture
thread. Therefore, we add another SwapQueue to communicate with the
render thread.
Bug: webrtc:9138, webrtc:9262
Change-Id: I665ce2d83a2b35ca8b25cca813d2cef7bd0ba911
Reviewed-on: https://webrtc-review.googlesource.com/76123
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23236}
This CL finalizes the feature extraction part for the RNN VAD adding
a class that combines a high-pass filter, LP residual computation,
pitch estimation and spectral features extraction.
This CL also includes a minor refactoring of the pitch estimation
library.
Bug: webrtc:9076
Change-Id: I918b9e143bc6dd2bf508a891446067258a68a777
Reviewed-on: https://webrtc-review.googlesource.com/75504
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23235}
Mini-change: add 'webrtc' namespace. The template class AudioFrameView
got declared in the global namespace by mistake. (My fault). Now
fixing.
Bug: webrtc:9262.
Change-Id: I6f2b4ab1ccdb223505e7181b8e6f12f5f23b3684
Reviewed-on: https://webrtc-review.googlesource.com/76140
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23215}
This CL defines SpectralFeaturesExtractor which is responsible for
computing the spectral features used as input for the RNN.
Bug: webrtc:9076
Change-Id: I5e1396b89eca9c13bb268e8419a16436a9c3450f
Reviewed-on: https://webrtc-review.googlesource.com/73760
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23206}
This CL adds robustness to avoid the AEC3 transparent mode to be
incorrectly activated when
-there is strong near-end noise
-there is only low-level nearend activity.
Bug: webrtc:9256,chromium:841193
Change-Id: I26c2759d163914eb85dc3d863da8acbf28cbb88d
Reviewed-on: https://webrtc-review.googlesource.com/75511
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23191}
This CL corrects the usage of the estimated echo path gain to not be
hardcoded to 1. In order to retain the tuned behavior, the CL for now
maintains the former behavior in the code.
Bug: webrtc:9255,chromium:851187
Change-Id: I7f91c72e476680a8a854c22b74b1771fae446110
Reviewed-on: https://webrtc-review.googlesource.com/75510
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23190}
This CL ensures that the external audio buffer delay is correctly used
by removing the applied headroom and avoiding that the delay estimation
feedback fromt the echo remover overrules the external delay
information.
Bug: webrtc:9241,chromium:839860
Change-Id: I53cc78ace34a71994ab24a3b552f29979e2aae78
Reviewed-on: https://webrtc-review.googlesource.com/75513
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23189}
During pitch search in the RNN VAD, we calculate auto
correlation. Before this CL, we computed kNumInvertedLags12kHz=147 dot
products of vectors with kBufSize12kHz-kMaxPitch12kHz=240
elements. This was the most time consuming step of the new VAD.
This CL makes the computation happen in frequency domain. Profiling
shows a 3x speed increase. In future, we can try using a more efficient
FFT and to reduce the FFT length to some of e.g. 400, 405, 432.
# For minimal Clang plugin check change.
TBR: kwiberg@webrtc.org
Bug: webrtc:9076
Change-Id: I688251a415869d53175a37f390f441d4e035d954
Reviewed-on: https://webrtc-review.googlesource.com/73366
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23171}
This CL adds helper functions to be used for the spectral features
computation. Namely, it includes the following:
- band boundaries (frequency to FFT coeffcient index)
- band energy coefficients
- log band energy coefficients
- fixed size DCT table and computation
Bug: webrtc:9076
Change-Id: I03a8799b226d986bc1e37cefd0c3039f94b5592a
Reviewed-on: https://webrtc-review.googlesource.com/73687
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23170}
BandAnalysisFft class that wraps the FFT library, makes it easy to change
FFT library, applies windowing function and owns the FFT input buffer.
Bug: webrtc:9076
Change-Id: I9e7ed587ae263b906e04a66bf8c06eaae64daf19
Reviewed-on: https://webrtc-review.googlesource.com/72900
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23150}
This CL softens the effect of the AEC3 transparent mode to also handle
headsets that leak low-level echoes in a nonlinear way.
This is handled by reintroducing the limit in the echo path gain for the
nonlinear mode. Due to recent improvements in echo suppressor behavior
this is now possible to do with a limited impact on the near-end speech.
Bug: webrtc:9246,chromium:840347
Change-Id: I0ca5157160d1884ba93b962323b56016756986d3
Reviewed-on: https://webrtc-review.googlesource.com/74703
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23145}
Adding a build target for the bi-qaud filter to make it available for
the RNN VAD of AGC2. Also adding a unit test to test the computation
both in-place and not in-place while comparing the produced output to
that of scipy.signal.
Bug: webrtc:9076
Change-Id: I16176a477ee4b81bb1e090c4906c3a9948ad2772
Reviewed-on: https://webrtc-review.googlesource.com/74220
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23141}
Fixes a confusion of time units (milliseconds vs blocks) of externally
reported audio delay. This fix reduces the risk of echo in the beginning
of a call.
Bug: webrtc:9241,chromium:839860
Change-Id: I534cc15d6b215a5881ae46759f573a56871170a3
Reviewed-on: https://webrtc-review.googlesource.com/74589
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23128}
This CL contains changes to the echo suppressor that improves the
transparency of AEC3.
- The comfort noise level is used as masker and the masking threshold is
increased.
- Suppression gains are allowed to increase more rapidly.
- Suppression gains decrease slower in the lower frequencies after strong
nearend.
Change-Id: I7adf31ed90b0e007072191f40439f27c3b0bccf2
Bug: webrtc:9230,chromium:839379
Reviewed-on: https://webrtc-review.googlesource.com/73680
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23115}
The audio processing code is using parts of the iSAC codec to do voice
activity detection (VAD), but it's undesirable for it to pull in the
entire iSAC codec as a dependency. So this CL factors out the parts of
iSAC that's needed for VAD to a separate build target.
Bug: webrtc:8396
Change-Id: I884e25d8fd0bc815fca664352b0573b4b173880e
Reviewed-on: https://webrtc-review.googlesource.com/69640
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23110}
RNN implementation for the AGC2 VAD that includes a fully connected
layer and a gated recurrent unit layer.
Bug: webrtc:9076
Change-Id: Ibb8b0b4e9213f09eb9dbe118bbdc94d7e8e4f91b
Reviewed-on: https://webrtc-review.googlesource.com/72060
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23101}
Functions to estimate pitch period and gain.
Bug: webrtc:9076
Change-Id: Icfe9430dcae11bdb96165c5bfe6e2b1d3bf848ab
Reviewed-on: https://webrtc-review.googlesource.com/70382
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23066}
This CL removes the updating of the buffered data used to to pad the
64 sample blocks to 128 samples FFTs. As that padding was used
incorrectly in one place this resolves an important issue.
Bug: webrtc:9159,chromium:833801,webrtc:9206
Change-Id: Ie6830878ebec6130b61d4e7e3169357f2e253073
Reviewed-on: https://webrtc-review.googlesource.com/73240
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23059}
This CL changes the way the suppressor gain is computed in AEC3 in that
the FFTs used are padded with data and windowed with a Hanning-style
window.
This gives better FFT accuracy, an behavior matching the suppressor
gain application, and also results in one less FFT operation.
Bug: webrtc:9204,chromium:837563
Change-Id: I612676c389cb76a3130966a9b596ff3f44d21863
Reviewed-on: https://webrtc-review.googlesource.com/73141
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23057}
If the adaptive gain is too low, we raise it slowly and only during
speech.
The CL gives better behavior at the start of a call. If the gain is too
high, the fixed-digital limits it. The gain is also quickly reduced by
the AdaptiveGainApplier.
Bug: webrtc:7494
Change-Id: I683f1e3e463cddec2d91f6c7f15c73e744430034
Reviewed-on: https://webrtc-review.googlesource.com/71484
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23053}
This reverts commit b04e5cae08.
Reason for revert: The reason for the revert is that some scenarios were detected where this caused the delay estimation to occur too slowly.
Original change's description:
> Making the delay estimator more robust to noisy nearends and low echoes
>
> This CL reduces the delay estimator step size to make it react better in
> scenarios where the environment is noisy, or the echo level is fairly
> low.
>
> Bug: webrtc:9177,chromium:835281
> Change-Id: I482d898c91eddc497e1284ee500d26df21a0574a
> Reviewed-on: https://webrtc-review.googlesource.com/71486
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#22990}
TBR=gustaf@webrtc.org,peah@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:9177, chromium:835281
Change-Id: I33e09ebfed8ad8330419e554f482c956608befce
Reviewed-on: https://webrtc-review.googlesource.com/72843
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Oleh Prypin <oprypin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23042}
This CL makes sure that the coherence-based gains are affected by the
upper gain limit during call start-up and after resets.
Bug: webrtc:9159,chromium:833801
Change-Id: I93fdd173b6e11ea861d0e01e12c048ec0a91db70
Reviewed-on: https://webrtc-review.googlesource.com/72841
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23039}
This CL is created from a work initiated at https://webrtc-review.googlesource.com/c/src/+/61160
The purpose of this work is to improve the performance of the echo canceler (AEC3) when the farend signal contains stationary noises:
- An stationarity estimator of the farend signal has been added for detecting the portions of the farend signal that are pure noise.
- When the echo canceler deals with a portion of the signal that contains basically noise, the echo suppressor is able to back-off and avoid the fading of the nearend speech.
Change-Id: Id4b87fc59f4765bf1fca36d1cab39a49aabe104a
Bug: webrtc:9193,chromium:836790
Reviewed-on: https://webrtc-review.googlesource.com/64141
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23024}
The code that attenuates narrow banded echo peaks in low frequencies
is removed as it affects transparency negatively.
Bug: webrtc:9192,chromium:836729
Change-Id: Ib90ce6a3db0a75e8d69bdca432e1f8f8bfbbd988
Reviewed-on: https://webrtc-review.googlesource.com/72380
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23022}
This CL overrides the power-based suppressor gain decision with
a coherence based descision for the cases when that indicates a
higher suppressor gain.
Bug: webrtc:9159,chromium:833801
Change-Id: I0e7d82ac1b8c70ffe9d45907559bb14b1b849d71
Reviewed-on: https://webrtc-review.googlesource.com/71660
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22997}
This CL reduces the delay estimator step size to make it react better in
scenarios where the environment is noisy, or the echo level is fairly
low.
Bug: webrtc:9177,chromium:835281
Change-Id: I482d898c91eddc497e1284ee500d26df21a0574a
Reviewed-on: https://webrtc-review.googlesource.com/71486
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22990}
Only specially taggged targets may transitively depend on poisonous
targets. We first apply it to audio codecs.
This makes it much clearer exactly what parts of the code still have
dependencies on the audio codecs (and we want to eventually get rid of
pretty much all of them).
Bug: webrtc:8396, webrtc:9121
Change-Id: Iba5c2e806c702b5cfe881022674705f647896d43
Reviewed-on: https://webrtc-review.googlesource.com/69520
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22979}
- No need to have a unique ptr for the swap queue
- Remove default case from the switch in
AudioProcessingImpl::HandleRuntimeSettings()
Bug: webrtc:9138
Change-Id: I346ba1db6510b5caa637510298b67ead07197b81
Reviewed-on: https://webrtc-review.googlesource.com/71164
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22958}
Functions to estimate the inverse filter via LPC and compute the LP
residual applying the inverse filter.
This CL also includes test utilities, in particular BinaryFileReader,
used to read chunks of data and optionally cast them on the fly, and
Create*Reader() functions to read resource files available at test
time.
Bug: webrtc:9076
Change-Id: Ia4793b8ad6a63cb3089ed11ddad89d1aa0b840f6
Reviewed-on: https://webrtc-review.googlesource.com/70244
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22946}
Adding a data structure to cache the results of pair-wise comparisons
between items stored in a ring buffer. This is used to avoid recomputing
the pair-wise comparison every time that a new item is added in a ring
buffer.
Bug: webrtc:9076
Change-Id: I88fb67a80bd3fd8497764dc7ae7e0a577c06b20f
Reviewed-on: https://webrtc-review.googlesource.com/70162
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22942}
Ring buffer template for a finite number of arrays of given type and size.
Bug: webrtc:9076
Change-Id: Ia6c2065b0013f4a00f693966641f9aebe09f6f5c
Reviewed-on: https://webrtc-review.googlesource.com/70161
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22939}
- protobuf library
- file_wrapper.h
These appear to have been left behind during the AecDump refactoring.
After this CL, APM no longer depends on zlib by default! :)
Bug: webrtc:9139
Change-Id: I12a8df2a17a575515b9c07165825f0879c4e15eb
Reviewed-on: https://webrtc-review.googlesource.com/70762
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Fredrik Solenberg <solenberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22923}
The SequenceBuffer class template implements a linear buffer with a Push
operation that is used to add a fixed size chunk of new samples into the
buffer. Its properties are its size and the size of the chunks that are
pushed. It is used to implement the pitch buffer in the RNN VAD feature
extractor, for which a ring buffer would be a painful choice.
Bug: webrtc:9076
Change-Id: I4767bf06d5a414dbed724a96ea4186ef013a1e30
Reviewed-on: https://webrtc-review.googlesource.com/70204
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22919}
This CL adds support for using any externally reported audio buffer
delay to set the initial alignment in AEC3 which is used before the
AEC has been able to detect the delay.
Bug: chromium:834182,webrtc:9163
Change-Id: Ic71355f69b7c4d5815b78e49987043441e7908fb
Reviewed-on: https://webrtc-review.googlesource.com/70580
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22917}
This CL increases the transparency in AEC3 during regions of low level
echo. What is done is:
-Low-level echoes are smoothly weighted so as to be deemed less
disturbing.
-The time-domain masking effect of the nearend speech is increased for
all frequencies.
-A separate, even more increased, time-domain masking effect is
introduced for lower frequencies.
-The intra-band masking is reduced to reduce the risk of echo leakage.
-The limiting of maximum gain due to filter-bank dynamics is removed
as the usecase for it could no longer be identified.
Bug: webrtc:9159,cromium:833801
Change-Id: I289b92919763124d6c5e5ede19e9a5917877c654
Reviewed-on: https://webrtc-review.googlesource.com/70421
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22915}
This reverts commit 8628f5bb7c.
Reason for revert: iOS buildbot failing
Original change's description:
> AGC2 RNN VAD: initial build targets
>
> rnn_vad_tool is an executable that reads a wav file of any sample rate
> compatible with 10 ms frames that are resampled and, when the VAD is
> fully landed, will process the resampled frames to compute the VAD
> probability.
>
> To avoid mac, win and ios trybot failures, to_be_removed.h/.cc have
> been added and will be removed as soon as the :lib target includes
> code that leads to a non-empty static lib file on those platforms.
>
> Bug: webrtc:9076
> Change-Id: I810c08acfa1adf2029e3baac2adda3045ae5214a
> Reviewed-on: https://webrtc-review.googlesource.com/70202
> Reviewed-by: Alex Loiko <aleloi@webrtc.org>
> Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#22898}
TBR=alessiob@webrtc.org,aleloi@webrtc.org
Change-Id: Ic6014dde78b0ef371804c52608145ba8acdd9c97
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9076
Reviewed-on: https://webrtc-review.googlesource.com/70144
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22899}
rnn_vad_tool is an executable that reads a wav file of any sample rate
compatible with 10 ms frames that are resampled and, when the VAD is
fully landed, will process the resampled frames to compute the VAD
probability.
To avoid mac, win and ios trybot failures, to_be_removed.h/.cc have
been added and will be removed as soon as the :lib target includes
code that leads to a non-empty static lib file on those platforms.
Bug: webrtc:9076
Change-Id: I810c08acfa1adf2029e3baac2adda3045ae5214a
Reviewed-on: https://webrtc-review.googlesource.com/70202
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22898}
Commit bbf21a3fd6 ("Remove dependencies on
modules:module_api from AudioProcessing") causes the build to fail with
libstdc++ due to several files using memcpy(3) or memset(3) while relying on
string.h being included implicitly by other headers.
Bug: webrtc:9139
Change-Id: Ib73284962f8694d8bed0551968265bfd13cab967
Reviewed-on: https://webrtc-review.googlesource.com/70180
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Raphael Kubo da Costa (rakuco) <raphael.kubo.da.costa@intel.com>
Cr-Commit-Position: refs/heads/master@{#22895}
Since we always pass in the first audio channel, we should always pass 1 as the number of channels in the initialization function.
Bug: webrtc:8732
Change-Id: I978edb125d7cc701a5e07193256327908be00560
Reviewed-on: https://webrtc-review.googlesource.com/69660
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22885}
It's a module for applying a gain to the capture signal.
The gain is the first processing step in APM.
After this CL, these two features work:
* The PreAmplifier can be activated with
AudioProcessing::Config::pre_amplifier
* The PreApmlifier can be controlled after APM creation by
AudioProcessing::SetRuntimeSetting.
What's left is a change to AecDumps and to AecDump-replay.
NOTRY=True # 1-line change, tests just passed.
Bug: webrtc:9138
Change-Id: I85b3af511695b0a9cec2eed6fee7f05080305e1d
Reviewed-on: https://webrtc-review.googlesource.com/69811
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22881}
Add configuration fields for the pre-amplifier in the Audio Processing
Module. Also add flags and settings for the pre-amplifier in
audioproc_f.
Also make the setting stored in Aec Dumps. And make the setting
applied when playing back Aec Dumps in audioproc_f.
Bug: webrtc:9138
Change-Id: I4e59df200e1ebc56f06fae74ebf17d85858958a3
Reviewed-on: https://webrtc-review.googlesource.com/69560
Reviewed-by: Oleh Prypin <oprypin@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22876}
This CL includes the following changes:
- APM runtime setting (ID + float payload) and unit tests
- Swap queue of APM runtime settings used in AudioProcessingImpl
- runtime settings handler that forwards the settings to APM
sub-modules when a message is retrieved from the queue
- Unit test placeholder to check that the pre-gain update message
is correctly delivered
Bug: webrtc:9138
Change-Id: Id22704af15fde2b87a4431f5ce64ad1aeafc5280
Reviewed-on: https://webrtc-review.googlesource.com/69320
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22873}
Added a new sub-module 'GainApplier'. The build target is
'modules/audio_processing/agc2:gain_applier'. A small refactoring
makes the GainApplier used in adaptive-digital AGC2.
The AGC2 now multiplies samples with a gain in 3 places. It's the
GainApplier, the GainCurveApplier, and the FixedGainController. The
GainApplier is used in AdaptiveDigitalGainApplier and will be used as
a pre-amplifier.
Bug: webrtc:9138
Change-Id: Ibc4c0ea109c6757f159d4adb6e3d8614179c9bc6
Reviewed-on: https://webrtc-review.googlesource.com/69321
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22849}
- Directly include api/audio/audio_frame.h everywhere AudioFrame is used.
- This *will* remove transient dependencies on libjpeg and a bunch of other things from the e.g. APM.
- audio_frame.h still included from module_common_types.h for backwards compatibility with clients.
Bug: webrtc:9139, webrtc:7504
Change-Id: Id96f9268c01667fbcc29a01f5c1dd25a37836897
Reviewed-on: https://webrtc-review.googlesource.com/62464
Commit-Queue: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22845}
This CL changes the handling of saturated microphone signals in AEC3.
Some of the changes included are
-Make the detection of saturated echoes depend on the echo path gain
estimate.
-Remove redundant code related to echo saturation.
-Correct the computation of residual echoes when the echo is saturated.
-Soften the echo removal during echo saturation.
Bug: webrtc:9119
Change-Id: I5cb11cd449de552ab670beeb24ed8112f8beb734
Reviewed-on: https://webrtc-review.googlesource.com/67220
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22809}
instead of relying on optional.h to included these 2 headers.
Bug: webrtc:9078
Change-Id: I7a4b3facd81690b8f107640487e129986c1f5ff6
Reviewed-on: https://webrtc-review.googlesource.com/68602
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22803}
|is_posix| will be switched to false for Fuchsia, this is a preliminary change.
Bug: chromium:812974
Change-Id: I3bfda3e056ad1e5229834286ce5d095d9204a428
Reviewed-on: https://webrtc-review.googlesource.com/65782
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Commit-Queue: Fabrice de Gans-Riberi <fdegans@chromium.org>
Cr-Commit-Position: refs/heads/master@{#22753}
AGC2 component that computes and applies the digital gain.
The gain is computed from an estimated speech and noise level.
This component decides how fast the gain can change and what it
should be.
Bug: webrtc:7494
Change-Id: If55b6e5c765f958e433730cd9e3b2b93c14a7910
Reviewed-on: https://webrtc-review.googlesource.com/64985
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22741}
We put back the old noise estimator from LevelController. We add a few
new unit tests. We also re-arrange the code so that it fits with how
it is used in AGC2. The differences are:
1. The NoiseLevelEstimator is now fully self-contained.
2. The NoiseLevelEstimator is responsible for calling SignalClassifier
and computing the signal energy. Previously the signal type and
energy were used in several places. It made sense to compute the
values independently of the noise calculation.
3. Re-initialization doesn't have to be done by the caller.
4. The interface is AudioFrameView instead of AudioBuffer.
# Bots are green, nothing should break internal stuff
NOTRY=True
Bug: webrtc:7494
Change-Id: I442bdbbeb3796eb2518e96000aec9dc5a039ae6d
Reviewed-on: https://webrtc-review.googlesource.com/66380
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22738}
Another submodule of the Automatic Gain Controller 2. It refines the
biased estimate of the Adaptive Mode Level Estimator. It works by
generating a delayed stream of peak levels. The delayed peaks are
compared to the level estimate.
Bug: webrtc:7494
Change-Id: If4c2c19088d1ca73fb93511dad4e1c8ccabcaf03
Reviewed-on: https://webrtc-review.googlesource.com/65461
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22732}
We update the configuration settings for AGC2. We also update their
effects. Now, 'gain_controller2.enable=true' means 'first run Adaptive
AGC2; then run AGC2 limiter'.
Previously, only the AGC2 limiter was implemented. To run that, one
had to set both 'gain_controller2.enable=true' and
'gain_controller2.enable_limiter=true'.
This setting also enables adaptive AGC2 in the test tool 'audioproc_f'.
Bug: webrtc:7494
Change-Id: I0d5dfe443f2cdc0ecf3aa4054442dab6276d284d
Reviewed-on: https://webrtc-review.googlesource.com/64990
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22669}
This CL adds a timeout for the detection of the headset mode that
allows it to be entered also for the cases where a headset is
inserted during the call.
Bug: chromium:826720,webrtc:9083
Change-Id: Ic3cb4cc0258997a74eccd1bcdf65765e44016ad8
Reviewed-on: https://webrtc-review.googlesource.com/65240
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22658}
The level estimator (AdaptiveModeLevelEstimator) produces a biased
estimate of the speech level. In our model, we use another module
(the SaturationProtector) to compute the bias. This CL contains the
estimator and a stub of the saturation protector.
Bug: webrtc:7494
Change-Id: I0df736d0346063f544fa680b4cc84177ea548545
Reviewed-on: https://webrtc-review.googlesource.com/64820
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22641}
This CL defines the control flow of the adaptive AGC. It also defines
method and class stubs.
Contents:
1. Divide the 'agc2' build target into 'fixed_digital' and
'adaptive_digital'.
1. Update the dependencies of everything that depended on 'agc2'.
2. Define the sub-modules of the adaptive digital AGC 2. They are:
1. Level Estimator - it gets the energy and a speech probability
and updates a speech level estimate.
2. Noise Estimator - it gets an immutable view of the speech frame
and updates the noise level estimate
3. Gain applier - it gets the speech frame, the current speech and
noise estimates, and the speech probability. It finds a gain to
apply and applies it.
4. AdaptiveAgc - sets up and controls the sub-modules described
above.
Bug: webrtc:7494
Change-Id: Ib7ccd8924e94eead0bc5f935b5d8a12e06e24fd1
Reviewed-on: https://webrtc-review.googlesource.com/64440
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22628}
We had the following pattern:
if (case_A) metric = METRIC_A;
if (case_B) metric = METRIC_B;
RTC_HISTOGRAM_COUNTS_10000(metric, value);
That's wrong, because once the logging macro runs once, it will use
the same histogram no matter what the first argument is. The macro
expands into roughly
static Histogram* histogram_ptr = nullptr;
if (histogram_ptr == nullptr) {
// Look up the histogram and put in histogram_ptr
}
// Add data through the histogram pointer.
We change the logging to use macros with string literals. We add a
macro for every of the 4 possible invocations. The macros will expand
to one static pointer each.
Bug: webrtc:8925
Change-Id: Ic7e4a6299eff31dd5988047edfcedce7d369e5ce
Reviewed-on: https://webrtc-review.googlesource.com/64724
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22606}
This moves it from an API directory (system_wrappers/include/) to a
non-API directory, which is exactly what we want for utilities like
this.
BUG=webrtc:8445
Change-Id: I440974da4d347b09ff042478720d7983056b62b9
Reviewed-on: https://webrtc-review.googlesource.com/21226
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22579}
The estimation on how well the linear filter in the AEC3 is performing
is done through an estimation of the ERLE. That estimation is then
used for knowing how much the suppressor needs to react in order to
cancel all the echoes.
In the current code, the ERLE is quite conservative during farend
inactivity and it is common that it goes to a minimum value during
those periods. Under highly varying conditions, that is probably the
right approach. However, in other scenarios where conditions does not
change that fast there is a loss in transparency that could be avoided
by means of a different ERLE estimation.
In the current CL, the ERLE estimation has been changed in the
following way:
- During farend activity the ERLE is estimated through a 1st order AR
smoother. This smoother goes faster toward lower ERLE values than to
larger ones in order to avoid overestimation of this
value. Furthermore, during the beginning of the farend burst, an
estimation of the ERLE is done that aim to represent the performance
of the linear filter during onsets. Under highly variant environments,
those quantities, the ERLE during onsets and the one computed during
the whole farend duration, would differ a lot. If the environment is
more stationary, those quantities would be much more similar.
- During nearend activity the ERLE estimation is decreased toward a
value of the ERLE during onsets.
Bug: webrtc:9040
Change-Id: Ieab86370a4333d2d0cd7041047d29651de4f6827
Reviewed-on: https://webrtc-review.googlesource.com/62342
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22568}
This CL adds robustifications for avoiding that the headset mode
is triggered for reverberant or weak echo paths.
Bug: webrtc:9047,chromium:824111,webrtc:8314,webrtc:8671,webrtc:5201,webrtc:5919
Change-Id: Ib111e617f765377c021a5b633cf13a7917fe62a6
Reviewed-on: https://webrtc-review.googlesource.com/64002
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22557}
This CL robustifies the echo removal behavior when headsets are used.
In particular it:
-Introduces a secondary, more refined alignment when no alignment can
be found using the delay estimator.
-Changes decision logic for when to use the linear filter output.
-Changes the decision logic for when to be transparent.
-Changes the way that the transparent mode works.
-Makes the nonlinear mode less aggressive.
-Removes the detector for non-audible echoes.
-Makes the attenuation when there are signals with strong narrowband
characteristics more mild in scenarios with low render.
Furthermore the CL:
-Removes the input of external echo leakage information.
Bug: webrtc:9047,chromium:824111,webrtc:8314,webrtc:8671,webrtc:5201,webrtc:5919
Change-Id: Ied1fe0c0a35d3c31b47606ed2db319a73644d406
Reviewed-on: https://webrtc-review.googlesource.com/60866
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22548}
And fix typo in UMA metric.
We have this pattern in the FrameCombiner component of the AudioMixer:
if (number_of_streams <= 1) {
// Copy or fill with zeros.
return;
}
// Mix and limit
LogMixingStats(/* args */);
When there is only one remote stream, info about active streams and
sample rate is not logged. This CL moves the call to log stats before
the 'return'.
Bug: webrtc:8925
Change-Id: I7b54f61f628273631909dafbfafa21e155e18d4a
Reviewed-on: https://webrtc-review.googlesource.com/62860
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22493}
This CL significantly improves the response time
of the AEC3 delay estimator to audio buffer issues.
The CL adds ensures that the delay estimator
correlators reacts to buffer issues from the
zero state which is much faster than if it has already
achieved a state matching a previous alignment.
The CL has been extensively tested on offline
recordings.
Bug: webrtc:9023, chromium:822245
Change-Id: Ic149b9429e592d4c3535eb8432582f435a1b4745
Reviewed-on: https://webrtc-review.googlesource.com/62081
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22461}
This CL ensures a smooth transition from the parameters used during
the startup phase in the call to the parameters used in the rest of the
call. This is achieved by slowly transitioning between the parameter
sets via interpolation.
Bug: chromium:819240,webrtc:8983
Change-Id: Ifbac4b93fc6ad6efc441f41fb88ef09e8ee3d669
Reviewed-on: https://webrtc-review.googlesource.com/60360
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22451}
The interface of the audioproc_f tool should be located in the api/ directory, so it becomes visible to the outside world.
Bug: webrtc:8732
Change-Id: Ia7475883aeb0e1f7a6afa5e791204b38dc53a8b8
Reviewed-on: https://webrtc-review.googlesource.com/61801
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22449}
We want to know how the AudioMixer is used and how FixedGainController
behaves.
The WebRTC.Audio.Agc2.FixedDigitalGainCurveRegion.* metrics measures
how often the input level hits different regions of the Fixed Gain
Controller gain curve (when the limiter is enabled). They also measure
how long the metrics stay in different regions. They are related to
WebRTC.Audio.ApmCaptureOutputLevelPeakRms, but the new metrics measure
the level before any processing done in APM.
The AudioMixer mixes incoming audio streams. Their number should be
mostly constant, and often some of them could be muted. The metrics
WebRTC.Audio.AudioMixer.NumIncomingStreams,
WebRTC.Audio.AudioMixer.NumIncomingActiveStreams log the number of
incoming stream and how many are not muted. We currently don't have
any stats related to that.
The metric WebRTC.Audio.AudioMixer.MixingRate logs the rate selected
for mixing. The rate can sometimes be inferred from
WebRTC.Audio.Encoder.CodecType. But that metric measures encoding and
not decoding, and codecs don't always map to rates.
See also accompanying Chromium CL
https://chromium-review.googlesource.com/c/chromium/src/+/939473
Bug: webrtc:8925
Change-Id: Ib1405877fc1b39e5d2f0ceccba04434813f20b0d
Reviewed-on: https://webrtc-review.googlesource.com/57740
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22443}
Since the echo detector processes both the render and the capture audio streams, it needs to know the sample rates and number of channels of both.
Bug: webrtc:8732
Change-Id: Icd26e561d5dd98bd789a6dfa75f468f3fde06fee
Reviewed-on: https://webrtc-review.googlesource.com/61861
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22436}
This CL corrects the bug that only looked at narrowband
render signals above 900 Hz and only assumed that the
influence of such lasted for 6 blocks, which resulted
in filter divergence and echo leakage.
Bug: webrtc:9008,chromium:821670
Change-Id: I9b2635d24b260e9d9a8c5c088ab663e03fb93c42
Reviewed-on: https://webrtc-review.googlesource.com/61800
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22434}
This CL corrects some errors that were included in the CL for reading
the AEC3 options in the audioproc_f tool
Bug: webrtc:8671
Change-Id: Iecaee0ebf08f8a8f75aba1d395dd467a41b876f3
Reviewed-on: https://webrtc-review.googlesource.com/60870
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22384}
This refactoring makes it easier to experiment with injectable components.
Bug: webrtc:8732
Change-Id: I2cd2a8ff80516a76aec814af02b61778915f2217
Reviewed-on: https://webrtc-review.googlesource.com/60863
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22372}
This is a reland of 6f37ed78d9
CQ dry run OK except for missing iOS swarming bots.
NOTRY=True
Original change's description:
> Deprecate the adaptive level controller
>
> Level control handled by default-on AGC.
>
> Bug: none
> Change-Id: I405daeceece12c896d41156b649fcfd556726f77
> Reviewed-on: https://webrtc-review.googlesource.com/59682
> Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
> Reviewed-by: Alex Loiko <aleloi@webrtc.org>
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#22305}
Bug: none
Change-Id: I0b9b8e2f3457d5efd4603efbfbbc6b84651df315
Reviewed-on: https://webrtc-review.googlesource.com/60720
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22352}
This CL extends the options for the audioproc_f tool to match the options
for AEC3.
Bug: webrtc:8671
Change-Id: I39972eae33dba461b94118ec47a8560eb9cfe5a6
Reviewed-on: https://webrtc-review.googlesource.com/43120
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22344}
So that we can avoid dependency cycles.
Bug: none
Change-Id: I821d9f1319dff01403d6e4e310cbb2d4b2b125e8
Reviewed-on: https://webrtc-review.googlesource.com/60500
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22328}
This CL introduces a different rampup behavir for the call startup and after resets
that may occur due to delay changes, clock-drift and audio path glitches.
Bug: chromium:819111, webrtc:8979
Change-Id: Ied1d7896be7f0c69aa6deb61475117021ca6ab09
Reviewed-on: https://webrtc-review.googlesource.com/60002
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22312}
This provides the empty shell of an AudioGenerator class.
It is intended to be used for debugging purposes and can be inserted
into the APM much like an AecDump. It allows for playing out diagnostic
audio unaffected by codecs and network jitter, while still capturing
API interaction like in a normal call.
NOTRY=True
Bug: webrtc:8882
Change-Id: I8132afc95cdba02ab233f44e22e0a5f530710ef7
Reviewed-on: https://webrtc-review.googlesource.com/53300
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22282}
Note: estimation is turned OFF if config_.ep_strength.default_len
is set >= 0 (in this case config_.ep_strength.default_len defines a
constant echo decay factor), and hence turned ON if < 0. In case the
echo tail estimation is turned ON, -config_.ep_strength.default_len is
the starting point for the estimator.
The estimation is done in two passes; first we go through all "sections"
(corresponding to chunks of length kFftLengthBy2) of the filter impulse
response to determine which sections correspond to a "stable" decay",
and then the second pass we go through each stable decay section and
estimate the decay. The actual decay estimation is based on linear
regression of the log magnitude of the squared impulse response.
A bunch of sanity checks are also performed continuously to avoid
estimation error during e.g., filter adaptation.
Bug: webrtc:8924
Change-Id: I686ce3f3e8b6b472348f8d6e01fb44c31e25145d
Reviewed-on: https://webrtc-review.googlesource.com/48440
Commit-Queue: Christian Schuldt <cschuldt@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22247}
The webrtc::AudioMixer uses a limiter component. This CL allows
changes the APM-AGC limiter to the APM-AGC2 limiter though a Chrome
field trial.
The AGC2 limiter has a float interface. We plan to eventually switch
to the AGC2 limiter. Therefore, we will now mix in de-interleaved
floats. Float mixing will happen both when using the old limiter and
when using the new one.
After this CL the mixer will support two limiters. The limiters have
different interfaces and need different processing steps. Because of
that, we make (rather big) changes to the control flow in
FrameCombiner. For a short while, we will mix in deinterleaved floats
when using any limiter.
Originally landed in https://webrtc-review.googlesource.com/c/src/+/56141/
Reverted in https://webrtc-review.googlesource.com/c/src/+/57940
because of both breaking compilation and having a severe error. The
error is fixed and a test is added. The compilation issue is fixed.
Bug: webrtc:8925
Change-Id: Ieba138dee9652c826459fe637ae2dccbbc06bcf0
Reviewed-on: https://webrtc-review.googlesource.com/58085
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22207}
The AEC3 factory is now part of the WebRTC API.
Bug: webrtc:8844
Change-Id: If6f419b4ca0354e2d346c0e6474086e456ba747e
Reviewed-on: https://webrtc-review.googlesource.com/57141
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22204}
The unit tests for AudioSendStream was generating a lot of warnings
about "Uninteresting mock function call" on mocked objects. This is due
to the default gmock implementation being NaggyMock and there was no
NiceMock override.
With this change the mocks are replaced with NiceMock implementations
which do not output warnings for unexpected calls. This makes the error
output from the test runner much easier to visually parse to find the
actual errors in failing tests.
Bug: None
Change-Id: Ic40db78159536ddeaa72a468fc2cb3ec17386d44
Reviewed-on: https://webrtc-review.googlesource.com/56220
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22152}
This CL moves the AEC3 API call skew estimator into a separate file.
This has the advantage that it can more easily be tested.
The CL also simplifies the code and adds unittests.
Bug: webrtc:8671
Change-Id: I19bc31ca5666cdc87a1ed14770ef20ead1b5b80d
Reviewed-on: https://webrtc-review.googlesource.com/55860
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22144}
This CL adds functionality for passing the information about the
estimated delay to the echo remover in AEC3.
The CL also adds information about how long ago the delay changed,
and how long ago the delay estimate was updated.
Bug: webrtc:8671
Change-Id: If274ffe0465eb550f3e186d0599c6dc6fef7f5e8
Reviewed-on: https://webrtc-review.googlesource.com/55261
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22137}
This CL adds functionality to allow removal of any echo occurring
before the render and capture signals have been properly aligned.
The functionality is added in such a manner that the transparency
to nearend is maintained as much as possible.
Bug: webrtc:8883
Change-Id: I813cbbc4c48822e7dffcd9ab6233be4c222089de
Reviewed-on: https://webrtc-review.googlesource.com/49941
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22107}
This CL adds the GainCurveApplier (GCA). It owns a
FixedDigitalLevelEstimator (LE) and an InterpolatedGainCurve
(IGC). The GCA uses the LE to compute the input signal level, looks up
a gain from IGC and applies it on the signal.
The other IGC and LE submodules were added in previous CLs [1] and
[2].
This CL also turns on AGC2 in the APM fuzzer.
[1] https://webrtc-review.googlesource.com/c/src/+/51920
[2] https://webrtc-review.googlesource.com/c/src/+/52381
Bug: webrtc:7949
Change-Id: Idb10cc3ca9d6d2e4ac5824cc3391ed8aa680f6cd
Reviewed-on: https://webrtc-review.googlesource.com/54361
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22103}
Targets containing files in api/audio are moved from api/BUILD.gn to
api/audio/BUILD.gn.
Bug: webrtc:8844
Change-Id: Ib7ea4b7eb3c2ea38ef8261a1fc5c2b4674985981
Reviewed-on: https://webrtc-review.googlesource.com/54360
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22074}
This CL adds the Level Estimator of the new gain controller. The Level
Estimator divides a 10ms input frame in kSubFramesInFrame=20 sub
frames. We take the maximal sample values in every sub frame. We then
apply attack/decay smoothing. This is the final level estimate.
The results will be used with InterpolatedGainCurve (see this CL
https://webrtc-review.googlesource.com/c/src/+/51920). For every level
estimate value, we look up a gain with
InterpolatedGainCurve::LookUpGainToApply. This gain is then applied to
the signal.
Bug: webrtc:7949
Change-Id: I2b4b3894a3e945d3dd916ce516c79abacb2b18b1
Reviewed-on: https://webrtc-review.googlesource.com/52381
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22054}
The FixedGainController (FGC) applies a fixed gain. It will also
control the limiter. The limiter will be landed over the next several
CLs.
The GainController2 is a 'private submodule' of APM. It will control
the new automatic gain controller (AGC). It controls the AGC through
Initialize() and ApplyConfig().
This CL contains
* build changes to make modules/audio_processing/agc2 an independent
target
* a new MutableFloatAudioFrame which is the audio interface between
AGC2 and APM
* move of the fixed gain application from GainController2 to
FixedGainController.
If you are a googler, there is more information in this doc:
https://docs.google.com/document/d/1RV2Doet3MZtUPAHVva61Vjo20iyd1bmmm3aR8znWpzo/edit#
Bug: webrtc:7949
Change-Id: Ief95cbbce83c3aafe54638fd2ab881c9fb8bdc3a
Reviewed-on: https://webrtc-review.googlesource.com/50440
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22046}
The functions replace some existing code and will be used in the
the new AutomaticGainController.
Bug: webrtc:7949
Change-Id: I9a32132d4a4699a507b8548a2eac10972a2f3fd6
Reviewed-on: https://webrtc-review.googlesource.com/53141
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22045}
Avoid including audio_processing.h from within AEC3.
Bug: webrtc:8844
Change-Id: I02c475c2fb84e2c24eac86baac3c7edaa08bebc0
Reviewed-on: https://webrtc-review.googlesource.com/53065
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22029}
This is one of several small steps of separating APM and AEC3.
Bug: webrtc:8844
Change-Id: Ib6e518fec5f7566cab3823ab35fcede8433f8f4e
Reviewed-on: https://webrtc-review.googlesource.com/53142
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22028}
This CL resets the AEC3 realignment functionality when a significant
and persistent skew in the number of render and capture API calls is
detected.
Bug: chromium:811658,webrtc:8879
Change-Id: Ib5c727b38f427da2a7d25eac7c939a17bdaabe74
Reviewed-on: https://webrtc-review.googlesource.com/52260
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21997}
This CL adds robustness in terms of echo removal and faster recovery
in order to regain echo canceller transparency after echo path changes.
The CL does:
-Improve the adaptation rate of the linear filter.
-Increase the look-window used before the linear filter has adapted.
-Decrease the effects of missed detection of residual echo.
-Increase the safety margin before allowing the suppressor gain to
increase.
Bug: chromium:804873,webrtc:8788
Change-Id: I28eedc4c8d0a4f0bc7b79c02d6d59bf00fddd566
Reviewed-on: https://webrtc-review.googlesource.com/48721
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21917}
WHAT: made a BUILD.gn with library and tests in the Audio Processing
Module Voice Activity Detector directory. Updated depending
code. Fixed a Clang warning.
WHY: to make it possible for a target to depend on just the VAD and
not the whole APM. There are other benefits:
* Sometimes faster compilation.
* The VAD takes up 28000 bytes of libjingle_peerconnection_so.so. Making
a peerconnection shared object file without the VAD has to be done in
steps. The first step is a custom target for the VAD. Hence this Cl.
Change-Id: Iea0207a0b5979db26baaf46b24beaefbb1c431af
BUG: webrtc:5716, webrtc:7494
Reviewed-on: https://webrtc-review.googlesource.com/47521
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Oleh Prypin <oprypin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21893}
Due to the growing number of arguments, these functions are being replaced by the AudioProcessingBuilder class.
Bug: webrtc:8668
Change-Id: Ic3936fbd47d92eac22a857a678dca5fd8c029d8b
Reviewed-on: https://webrtc-review.googlesource.com/46241
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21826}
If a WebRTC build target requires gmock it has to include
test/gmock.h and just depend on //test:test_support.
Unfortunately //testtest_support was a leaky abstraction because it
wasn't propagating the correct -I compiler flag. To make everything
work, all the targets that use gmock started also to depend on
//testing/gmock (even if they were not including any gmock header
directly).
This CL makes //testtest_support propagate the include path up in the
dependency chain so it is possible to remove unused dependencies.
Note: all_dependent_configs should probably be used in the original
gmock target. There is an ongoing discussion about it. This CL solves
the problem on WebRTC side and it is forward compatible.
TBR=phoglund@webrtc.org
Bug: webrtc:8603
Change-Id: If08daf2ce9a6431a6e881a236743b4ec33b59ea7
Reviewed-on: https://webrtc-review.googlesource.com/44340
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Oleh Prypin <oprypin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21776}
The AecMobile struct contains a ::farendOld field. It's type is 'short [2][80]'.
The field was initialized by
memset(&aecm->farendOld[0][0], 0, 160);
But sizeof(short) is not guaranteed to be 1. This causes use of
unititialized memory on some platforms. According to MSAN, it can
affect the output of the echo canceller.
The issue was found by the MSAN fuzzer.
This change initializes the array properly.
Bug: chromium:805396
Change-Id: Ibcaca2185cfa153e8fd826e9addfc04d7b65e417
Reviewed-on: https://webrtc-review.googlesource.com/43860
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21764}
A coherence vector cohxd is computed in
WebRtcAec_ComputeCoherence. The coherence values should theoretically
be 0 <= x <= 1. Due to the way they are computed that is not always
the case.
The coherence values are used to update an error signal
estimate hNl in webrtc::EchoSuppression. 'hNl[i]' should contain an
error magnitude for frequency 'i'.
The error magnitudes are used as a basis for exponentiation. If a
magnitude is negative, the result is NaN.
The NaNs will then spread to the output signal.
This change caps the hNl values at 0. I considered capping the
coherence values at 1. The coherence values are calculated differently
for MIPS, NEON and SSE. Therefore it's simpler to cap the hNl values
instead.
The issue was found by the AudioProcessing fuzzer.
Bug: chromium:804634
Change-Id: I8ebaa441d77c3f79d9c194a850cb2b9eed1c2024
Reviewed-on: https://webrtc-review.googlesource.com/43740
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21761}
This change
* replaces a left shift with multiplication, because the shiftee can
be negative.
* replaces a right shift (a >> b) with the expression (b >= 32 ? 0 : a >> b)
because a is a 32-bit value, and b can be >= 32.
cppreference quote relating to the second change:
"In any case, if the value of the right operand is
negative or is greater or equal to the number of bits in the promoted
left operand, the behavior is undefined."
Bug: chromium:805832 chromium:803078
Change-Id: I67db0c3fedb0af197b2205d424414a84f8fde474
Reviewed-on: https://webrtc-review.googlesource.com/43761
Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21760}
The faster AEC3 alignment introduced recently may in
cases cause the alignment (and the AEC3) to repeatedly
reset. This CL avoids these resets by handling buffer
issues (which are triggering the resets) separately
during the initial coarse alignment phase.
Change-Id: Idf5e2ffda2591906da8060d03ec8ca73cdaedf53
Bug: webrtc:8798,chromium:805815
Reviewed-on: https://webrtc-review.googlesource.com/43480
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21758}
This change handles a special case in NoiseSuppression. The special
case was found by the AudioProcessing fuzzer.
A const copy of the capture audio stream is sent to
NoiseSuppression::AnalyzeCaptureAudio. Then audio undergoes processing
by e.g. the echo canceller. Then it's processed by
NoiseSuppression::ProcessCaptureAudio.
The special case is when the following conditions are all satisfied:
* All stream samples are constantly zero in the call to
AnalyzeCaptureAudio
* a processing component modifies it to be nonzero before the call to
ProcessCaptureAudio
* The array NoiseSuppressionC::magnPrevAnalyze is filled with
zeros. This holds after initialization.
In this case, there is a division by zero in WebRtcNs_ProcessCore. The
resulting NaN values pollute the output signal. They are only detected
several submodules later in the process chain. The NaN values cause
the EchoDetector to crash in debug mode.
There is special handling of the case when the signal is constant zero
in ProcessCore. This change avoids zero division by handling this
issue the same way.
Bug: chromium:803810 chromium:804634
Change-Id: I6d698dd0cd27e6d550b42085124300ce58533125
Reviewed-on: https://webrtc-review.googlesource.com/41282
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21745}
This CL increases the speech of the initial alignment in AEC3 by
loosening the requirements on the accuracy of the initial estimates.
Bug: webrtc:8784, chromium:804270
Change-Id: I86e2d97830843524090a1cf877965739f66dc058
Reviewed-on: https://webrtc-review.googlesource.com/40660
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21728}
The conversational_speech_generator tool now adjusts the level of
different speech segments.
Implementation:
The Turn and MultiEndCall::SpeakingTurn structs have an extra 'gain'
member. It's read and parsed in timing.cc and put in a Turn
struct. It's put in a SpeakingTurn struct in multiend_call.cc and read
and applied to the signal in simulator.cc
Bug: webrtc:7494
Change-Id: I9b82a896eb616c8b5ef14d41dfdfd085ef1d3fbb
Reviewed-on: https://webrtc-review.googlesource.com/26280
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21714}
