Refactoring CL to improve names and allow to inject a VAD into
`VadLevelAnalyzer` (new name for `VadWithLevel`).
The injectable VAD is needed to inject a mock VAD and write better
unit tests as new features are going to be added to the class.
Bug: webrtc:7494
Change-Id: Ic0cea1e86a19a82533bd40fa04c061be3c44f068
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185180
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32195}
This CL activates the newly added AVX2 support by default.
The activation is done beneath a kill-switch.
Beyond the above, the CL also changes an incorrect DCHECK_GT
to a DCHECK_GE.
Bug: webrtc:11663
Change-Id: I231ccb2f5efabf74cd8190411daa954b2b94a2a0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183042
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32193}
First step to only expose the relevant RNN VAD API to AGC2.
Bug: webrtc:7494
Change-Id: I7f11f6eebded124c30cabd64963c8e3ccc35e58f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185124
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32185}
This change introduces a new Hidden Markov Model based classifier for
AEC3's 'transparent mode'. Transparent mode is used with
headsets/headphones where the speaker signal does not leak into the
microphone signal.
The current classifier suffers from two problems:
1. It sometimes takes a long time to enter transparent mode.
2. Sometimes transparent mode is left (and it once again takes a long
time to re-enter).
Both problems have a severe effect on AEC transparency.
The new classifier enters transparent mode quicker and is less likely
to exit transparent mode when there is no echo. This improves the
audio experience when using headset/headphones.
Another (minor) benefit of this change is that when transparent mode
is disabled no classifier is run (or even created) saving some memory
and CPU cycles.
Bug: webrtc:10232
Change-Id: I509af0e22b59463aeaead53c78c35be1e97fe8c3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/184500
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32182}
In preparation for a coming refactoring CL, the (fixed) extra saturation
margin is now applied into `AdaptiveModeLevelEstimator`.
This CL also improves the unit tests by hard-coding its saturation
params instead of reading them from a field trial.
This reduces the chances of making the test flaky if a default value
changes.
Tested: Bit-exactness verified with audioproc_f
Bug: webrtc:7494
Change-Id: I6765def9887a2f4e55b04d929af754cfecbb1626
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/184927
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Reviewed-by: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32172}
- Passing the speech peak power instead of VAD data
- The private class SaturationProtector::PeakEnveloper has been removed
- Added `initial_saturation_margin_db_` parameter to correctly
initialize `last_margin_` (renamed to `margin_db_`)
- Member names have been fixed and/or shortened for better readability
Tested: Bit-exactness verified with audioproc_f
Bug: webrtc:7494
Change-Id: I6cad2974397319737c8ac201d44311bf16275f28
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/184925
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32168}
Even if small, the peak delay buffer copies N-1 elements for each frame
whereas a ring buffer is copy-free and scales better if the buffer size
increases.
Tested: Bit-exactness verified with audioproc_f
Bug: webrtc:7494
Change-Id: If8c33877b7ab1d881a0606e222b26857a82fff69
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/184920
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32165}
This CL adds explicit initialization of the FilterAnalyzer in AEC3.
While the current code never uses any fields before they are initialized,
it makes sense to be on the safe side and add initialization during
construction.
Bug: webrtc:11918
Change-Id: I467c4c8b8d6dd859a1b216baef28ac1e9d3f76c2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183764
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32069}
This is a reland of 2b242d8fba
Original change's description:
> Merge cpu_features build targets into //system_wrappers.
>
> Before this CL, functions declared in cpu_features_wrapper.h where
> not defined in the same build target, causing brittle builds that
> might fail at link time if the binary was not depending on
> //system_wrappers (the target with the definitions), violating [1].
>
> This CL moves everything into //system_wrappers and also moves
> cpu_features_wrapper.h definitions from C to C++ (in order to be able
> to add the definitions to a C++ build target like //system_wrappers).
>
> [1] - https://webrtc.googlesource.com/src/+/refs/heads/master/style-guide.md#h-cc-pairs
>
> Bug: None
> Change-Id: I5a0009cddb17206b19f2a71eeba722faacc4bcae
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183380
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32039}
TBR=kwiberg@webrtc.org
Bug: None
Change-Id: I1695b9a34d3ec20c50c1202a745f64fac58edef0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183444
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32042}
This reverts commit 2b242d8fba.
Reason for revert: Breaks downstream project.
Original change's description:
> Merge cpu_features build targets into //system_wrappers.
>
> Before this CL, functions declared in cpu_features_wrapper.h where
> not defined in the same build target, causing brittle builds that
> might fail at link time if the binary was not depending on
> //system_wrappers (the target with the definitions), violating [1].
>
> This CL moves everything into //system_wrappers and also moves
> cpu_features_wrapper.h definitions from C to C++ (in order to be able
> to add the definitions to a C++ build target like //system_wrappers).
>
> [1] - https://webrtc.googlesource.com/src/+/refs/heads/master/style-guide.md#h-cc-pairs
>
> Bug: None
> Change-Id: I5a0009cddb17206b19f2a71eeba722faacc4bcae
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183380
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32039}
TBR=mbonadei@webrtc.org,kwiberg@webrtc.org
Change-Id: I4daa7582e55a0343eef72f08ed023c73e0b6456b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: None
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183443
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32040}
Before this CL, functions declared in cpu_features_wrapper.h where
not defined in the same build target, causing brittle builds that
might fail at link time if the binary was not depending on
//system_wrappers (the target with the definitions), violating [1].
This CL moves everything into //system_wrappers and also moves
cpu_features_wrapper.h definitions from C to C++ (in order to be able
to add the definitions to a C++ build target like //system_wrappers).
[1] - https://webrtc.googlesource.com/src/+/refs/heads/master/style-guide.md#h-cc-pairs
Bug: None
Change-Id: I5a0009cddb17206b19f2a71eeba722faacc4bcae
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183380
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32039}
This CL removes the possibility that APM cannot be created, i.e., that
the create method can return nullptr. That was already the case
implicitly but this CL makes that behavior explicit.
Bug: webrtc:5298
Change-Id: I2706ea538c9d1b4bcd65faecab637640a209a4dc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183101
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32029}
This is a reland of 8be2f201ba
Original change's description:
> Add ability to state whether the APM output will be used
>
> This CL adds the ability for the surrounding code to state that the
> APM output will not be used. The intended usecase for this is to allow
> APM to run at a lower complexity when the endpoint is muted.
> When APM has been informed that the output will not be used, it can
> turn off code that is needed only for ensuring that the output audio
> will sound good.
>
> Bug: b/154437967,b/163802450
> Change-Id: I8e22989e35354372e96191d15da44beb9d1b26ae
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181200
> Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#31949}
Bug: b/154437967
Bug: b/163802450
Change-Id: Ia77a9e43f913929d1afa72212f1ea6c192d0e519
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181887
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31957}
This reverts commit 8be2f201ba.
Reason for revert: Breaks downstream
Original change's description:
> Add ability to state whether the APM output will be used
>
> This CL adds the ability for the surrounding code to state that the
> APM output will not be used. The intended usecase for this is to allow
> APM to run at a lower complexity when the endpoint is muted.
> When APM has been informed that the output will not be used, it can
> turn off code that is needed only for ensuring that the output audio
> will sound good.
>
> Bug: b/154437967,b/163802450
> Change-Id: I8e22989e35354372e96191d15da44beb9d1b26ae
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181200
> Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#31949}
TBR=alessiob@webrtc.org,peah@webrtc.org
Change-Id: I1e56dafbbfa6ea69cccbbb5cdc2b1e2a6c122c11
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: b/154437967
Bug: b/163802450
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181884
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31953}
This CL adds the ability for the surrounding code to state that the
APM output will not be used. The intended usecase for this is to allow
APM to run at a lower complexity when the endpoint is muted.
When APM has been informed that the output will not be used, it can
turn off code that is needed only for ensuring that the output audio
will sound good.
Bug: b/154437967,b/163802450
Change-Id: I8e22989e35354372e96191d15da44beb9d1b26ae
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/181200
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31949}
Internal counters in the RenderDelayBuffer can slip out of sync with external counters, leading to buffer misalignment.
This CL gives the RenderDelayBuffer an opportunity to update its counters.
Tested:
Passes: modules_unittests --gtest_filter=BlockProcessor.*
Fails as expected due to new unit test: modules_unittests --gtest_filter=BlockProcessor.* --force_fieldtrials="WebRTC-Aec3RenderBufferCallCounterUpdateKillSwitch/Enabled/"
audioproc_f with default AEC settings has been verified to be bit-exact on a large number of aecdumps.
Bug: webrtc:11803
Change-Id: I9363b834c8c8c934add0335013df60bf131da4bc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/180126
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31795}
Removes usage of Chromium's //third_party/pymock in favor of the version
provided by vpython. This is so that the third_party version can
eventually be removed.
TBR=aleloi@webrtc.org
Bug: chromium:1094489
Change-Id: I68511e11ed1e517c2b6d3bb832090a3c27e480e5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/177921
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@google.com>
Cr-Commit-Position: refs/heads/master@{#31568}
This required for gcc-10.
Bug: None
Change-Id: Iba3ff0881005cb2ae4574e47284a1b881594de86
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/176361
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31417}
This CL extends the WebRTC testing API to allow audioproc_f -based
testing using a pre-created AudioProcessing object. This is an
important feature to allow testing any AudioProcessing objects
that are injected into WebRTC.
Beyond adding this, the CL also changes the simulation code to
operate on a scoped_refptr<AudioProcessing> object instead of a
std::unique<AudioProcessing> object
Bug: webrtc:5298
Change-Id: I70179f19518fc583ad0101bd59c038478a3cc23d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/175568
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31319}
...for the NullDataDumper, WrongCaptureBlockSize and
DISABLED_WrongRenderBlockSize tests. This is to avoid creation
of additional threads on Mac, which can cause issues on asan bots.
Bug: webrtc:11577
Change-Id: I4e6a64d47ec3b0a0e0018b19a0486208ba7e6ae2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/175600
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Tommi <tommi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31307}
This CL changes the way that AecDumps are created in APM. Instead
of being injected, they are now created via the API.
This removes the AecDumpFactory from the API surface of APM and
makes the API more explicit.
The CL will be followed by one more CL that deprecates the usage
of the AttachAecDump API also within the audio_processing
and the fuzzer folders.
The CL also moves the aec_dump.* files from the include folder
to the aec_dump folder and changes the build files. The reasons
for this are that
1) The content of aec_dump.h is not really part of the API
surface of APM.
2) Those files anyway needed to be moved to a separate build-
target to avoid a circular build-file dependency caused by
the other changes in this CL
Bug: webrtc:5298
Change-Id: I7dd6b49de76eb44158472874e1d4ae17dca9be54
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/174750
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31207}
This API is and has always been unused.
Bug: webrtc:5298
Change-Id: If1201d37a00e387567d44a9ed8be99a157915b47
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/174661
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31180}
This makes it optional for an echo detector to report metrics through
the getStats interface.
Bug: webrtc:11539
Change-Id: I1fef93b7bf534637b69c16971d38709b3e849a08
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/174100
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31146}
This introduces a function AudioProcessingImpl::SetCreateOptionalSubmodulesForTesting to simulate the exclusion of build-optional submodules, and tests of the currently only excludable submodule.
Bug: webrtc:11292
Change-Id: If492606205c9fdc669a6dce3a8989a434aeeed1f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/173746
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31138}
This CL adds a build flag to allow building the non-test parts
of WebRTC without the audio processing module.
The CL also ensures that the WebRTC code correctly handles
the case when no APM is available.
Bug: webrtc:5298
Change-Id: I5c8b5d1f7115e5cce2af4c2b5ff701fa1c54e49e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/171509
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31133}
This CL moves the two OOURA implementations present in the WebRTC tree
in one place.
No functional change is expected.
TBR=kwiberg@webrtc.org
No-Try: True
Bug: webrtc:11509
Change-Id: I330a9ec57e3dc65c9c8b43edd4bb295c55920efa
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/173682
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31106}
This is a reland of 12e2d4ddb2
Original change's description:
> APM: Remove the usage of AudioFrame in the AudioProcessing interface
>
> This CL removes the AudioFrame-based APIs from the AudioProcessing
> interface.
>
> Bug: webrtc:5298
> Change-Id: Iab470b26b10e06dcf29c543851ae0085bc5b66f0
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172939
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#31016}
Bug: webrtc:5298
Change-Id: I70e6d59afc3716ee6109d8b9dc384abc71c93624
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/173476
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31066}
This CL removes the AudioFrame-based APIs from the AudioProcessing
interface.
Bug: webrtc:5298
Change-Id: Iab470b26b10e06dcf29c543851ae0085bc5b66f0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172939
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31016}
This CL adds several field-trial-based overrides for parameters related
to AEC transparency.
The changes have been shown to be bitexact for a test dataset.
Bug: webrtc:11487,chromium:1067597
Change-Id: Ica9613db74240687fc85efe059874ef8c20aa7d5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172844
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31007}
This CL adds two kill-switches to the AEC3 code to be used as
safe fallbacks to increase AEC transparency.
The changes have been shown to be bitexact for a test dataset.
Bug: webrtc:11487,chromium:1067597
Change-Id: I7f9f78db4964990bcdfa9adae6ef36a56bce7224
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172840
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30998}
This allows clients to exclude the transient suppression submodule from WebRTC builds, by defining WEBRTC_EXCLUDE_TRANSIENT_SUPPRESSOR.
The changes have been shown to be bitexact for a test dataset (when the flag is _not_ defined.)
No-Try: True
Bug: webrtc:11226, webrtc:11292
Change-Id: I6931c82a280a9b40a53ee1c2a9820ed9e674a9a5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/171421
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30978}
This allows the user to run audioproc_f with various field trials set.
The approach is copied from test/test_main_lib.cc.
Tested:
1. Verified bitexactness vs ToT audioproc_f on a large dataset of aecdumps
2. Ran it with flags --aec=1 --force_fieldtrials="WebRTC-Aec3ClampInstQualityToZeroKillSwitch/Enabled/WebRTC-Aec3ClampInstQualityToOneKillSwitch/Enabled/" and verified in GDB that the AEC3 config was changed accordingly.
No-Try: True
Bug: webrtc:5298
Change-Id: I70eec7777f70893b36af33794a5842f67d56af31
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172623
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30976}
Currently, audioproc_f crashes on a DCHECK as the data vector of Int16Frame is not resized.
Bug: webrtc:5298
Change-Id: I897cf0fce07e0ed2c0a365a965fa50fd3d8ddd18
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172624
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30969}
This CL adds a number of kill-switches to the AEC3 code to be used as
safe fallbacks to increase AEC transparency.
The changes have been shown to be bitexact for a test dataset.
Bug: webrtc:11475,chromium:1066836
Change-Id: Ibebcbbfbbd958cb6fcc6993247e3030fa65b582c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172600
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30964}
This started to happen after turning on "gn analyze" on trybots. It
looks like this code was never built on MSVC trybots.
This CL tries to avoid the type deduction.
Error:
quality_assessment/sound_level.cc(103):
error C3535: cannot deduce type for 'const auto *' from '_FwdIt'
with
[
_FwdIt=std::_Array_iterator<int16_t,1440>
]
Bug: webrtc:11262
Change-Id: Iea7cf2ec62f1d0edfcf6ceac169c92050339d3c4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/172088
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30933}
This moves rms_level.* into a separate build target.
Bug: webrtc:11226
Change-Id: I94ceacd1ec65dda48f5d19b22ba2625d13543e08
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170323
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30856}
The error paths free the memory referenced by each pointer in the
struct, but if the pointers are not initialized, random memory belonging
to other parts of the program could be freed instead. Zero out the
entire struct as soon as it is allocated to ensure that nothing is freed
if there is nothing to free.
Bug: webrtc:11446
Change-Id: I8a2985d1388477339351aa03107ee68925372d49
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/171121
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30852}
This CL adds namespaces to those files remaining within APM that do not
have any such.
BUG=webrtc:5298
Change-Id: I710b3d2a3644bea9d4bdffef0d77883b30303338
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/171111
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30850}
This CL changes so that the AGC legacy C code is built as C++.
The CL also
-removes #defines from the header files.
-adds namespaces
-removes unused code.
To simplify the review, the CL is partitioned into different patchsets
where each comprising of one step in the modification of the code
(e.g., patch set 1 performs the renaming of the .c files to .cc).
Bug: webrtc:5298
Change-Id: I362b17bde91142b2f2166acba4f2f888efd50fa1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/171064
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30847}
This CL renames the shadow filter in AEC3 to have the more accurate name
coarse filter.
The CL consists of 3 main initial patch sets, designed to simplify
the review:
1) Replaces "shadow" with "coarse" and adds a fall-back functionality
to support the old filter naming.
2) Renames the files according to the new naming.
3) Performs a "git cl format"
Bug: webrtc:8671
Change-Id: I28d6041d0d34e85f8f8048d004b44a1a5f07bb07
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170981
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30846}
This CL renames the main filter in AEC3 to have the more accurate name
refined filter.
The CL consists of 3 main initial patch sets, designed to simplify
the review:
1) Replaces "main" with "refined" and adds a fall-back functionality
to support the old filter naming.
2) Renames the files according to the new naming.
3) Performs a "git cl format"
Bug: webrtc:8671
Change-Id: Ifd0aab34e291736a2250e0986348404618630b1d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170825
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30843}
A follow-up CL will move the rms_level.* files into the new target.
Bug: webrtc:11226
Change-Id: I59579b026346f627c0a2739d25f90c12bffbf248
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/171102
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30840}
This CL removes the redundant VAD output from the newly introduced
integer API in AudioProcessing.
Bug: webrtc:5298
Change-Id: Iad2b1b97ada7f4863139655526c110e326c6788a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170824
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30832}
This CL replaces all remaining usage of AudioFrame within APM,
with the exception of the AudioProcessing interface.
The main changes are within the unittests.
Bug: webrtc:5298
Change-Id: I219cdd08f81a8679b28d9dd1359a56837945f3d4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170362
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30831}
This CL corrects an issue in the storing of the processed capture output
into aecdump recordings for the case when the integer API interface is
used.
Bug: webrtc:11441
Change-Id: I24aad47b5d62e0738d412ec270ad1db3a76aa94f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170823
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30829}
This CL moves the implementation of of the AudioFrame
support from the implementation of AudioProcessing
to proxy methods that map the call to the integer
stream interfaces (added in another CL).
The CL also changes the WebRTC code using the AudioFrame
interfaces to instead use the proxy methods.
This CL will be followed by one more CL that removes
the usage of the AudioFrame class from the rest of
APM (apart from the AudioProcessing API).
Bug: webrtc:5298
Change-Id: Iecb72e9fa896ebea3ac30e558489c1bac88f5891
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170110
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30812}
This CL creates a new stream interface and uses it to replace
most of the usage of AudioFrame in the non-test code.
The CL changes some of the test code as well, as the other
changes required that.
The CL will be followed by 2 more related CLs.
Bug: webrtc:5298
Change-Id: I5cfbe6079f30fc3fbf35b35fd077b6fb49c7def0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/170040
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30799}
This is a first step to make the transient suppressor and voice detection optional.
Bug: webrtc:11226, webrtc:11292
Change-Id: I203125e11694a957a32bc7f98f3bec3ec8867839
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166523
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30783}
This CL fixes the build for the meta taret "all"
(ninja -C out/Debug all).
More interestingly fixes cascaded_biquad_filter_unittest.cc which
seems not to be run at the moment.
Bug: webrtc:11411
Change-Id: I3d5f83c3898cca96aff8fbdad97d7b48caa9fffa
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/169858
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30722}
This CL refactors and optimizes the 3-band split-filter in APM, which
is a very computationally complex component.
Beyond optimizing the code, the filter coefficients are also quantized
to avoid denormals.
The changes reduces the complexity of the split filter by about 30-50%.
The CL has been tested for bitexactness on a number of aecdump
recordings.
(the CL also removes the now unused code for the sparse_fir_filter)
Bug: webrtc:6181
Change-Id: If45f8d1f189c6812ccb03721156c77eb68181211
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/168189
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30592}
This CL avoids the head-allocations done in a sum of the squared values
in a nested vector.
Bug: webrtc:11361, chromium:1052086
Change-Id: I698b855bdd54df2147ef3b6d5e3d401401228d76
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/168543
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30520}
This CL removes the code for the deprecated legacy noise.
Bug: webrtc:5298
Change-Id: If287d8967a3079ef96bff4790afa31f37d178823
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167922
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30434}
This CL adds support for reading and writing floating point
wav files in WebRTC. It also updates the former wav handling
code as well as adds some simplifications.
Beyond this, the CL also adds support in the APM data_dumper
and in the audioproc_f tool for using the floating point wav
format.
Bug: webrtc:11307
Change-Id: I2ea33fd12f590b6031ac85f75708f6cc88a266b4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/162902
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30423}
This CL adds the missing support for multi-channel in the code that
provides an optional and configurable delay to be added to the
microphone signal.
The CL also makes the creation of the delay object conditional on the
need for that support (this is important since this adds a significant
heap memory footprint)
Bug: webrtc:11314,chromium:1045910
Change-Id: I92d577e31af830945fe9d5ca2032000aad4266be
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167525
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30392}
This is a reland of 48148dc840
Original change's description:
> Change log level of AEC3 buffer info to VERBOSE
>
> Otherwise, test logs become very verbose:
> https://chrome-swarming.appspot.com/task?id=49b6fa6ac93e2310
> See linked issue.
>
> Bug: webrtc:11278
> Change-Id: I778ee4826de6c1b23d47a5d5ce302d074900ce6b
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165786
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30233}
Bug: webrtc:11278, webrtc:11295
Change-Id: I8e6f11457e283c83cae5581adcacdc4d3b5431bb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167360
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30372}
This reverts commit 48148dc840.
Reason for revert: Causing tests to timeout, see bugs.webrtc.org/11295
Original change's description:
> Change log level of AEC3 buffer info to VERBOSE
>
> Otherwise, test logs become very verbose:
> https://chrome-swarming.appspot.com/task?id=49b6fa6ac93e2310
> See linked issue.
>
> Bug: webrtc:11278
> Change-Id: I778ee4826de6c1b23d47a5d5ce302d074900ce6b
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165786
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30233}
TBR=saza@webrtc.org,peah@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:11278
Change-Id: I283648a6d4d58cfe7af7a646d915122207883007
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167180
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30357}
This CL reduces the complexity of the Subtractor.ConvergenceMultiChannel
test by
1. Slightly reducing the amount of tested combinations for the non-debug
mode.
2. Drastically reduce the amount of tested combinations for the debug
mode.
Bug: webrtc:11295
Change-Id: I56bfa4a1463d26e5217b6a4d7f2ef54de7aab512
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166529
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30343}
`gn format` recently [1] changed its formatting behavior
for deps, source, and a few other elements when they
are assigned (with =) single-element lists to be consistent
with the formatting of updates (with +=) with single-element.
Now that we've rolled in a GN binary with the change,
reformat all files so that people don't get presubmit
warnings due to this.
CL generated with:
$ git ls-files | grep BUILD.gn | xargs gn format
$ gn format build_overrides/build.gni
$ gn format build_overrides/gtest.gni
$ gn format modules/audio_coding/audio_coding.gni
$ gn format webrtc.gni
$ gn format .gn
Plus a few manual changes to add exceptions for
"public_deps" (after changing these lines the presubmit
started to complain).
[1] - https://gn-review.googlesource.com/c/gn/+/6860
Bug: webrtc:11302
Change-Id: Iac29d23c1618ebef925c972e2891cd9f4e8cd613
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166882
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30334}
This is a reland of f3aa6326b8
Original change's description:
> Replace the ExperimentalAgc config with the new config format
>
> This CL replaces the use of the ExperimentalAgc config with
> using the new config format.
>
> Beyond that, some further changes were made to how the analog
> and digital AGCs are initialized/called. While these can be
> made in a separate CL, I believe the code changes becomes more
> clear by bundling those with the replacement of the
> ExperimentalAgc config.
>
> TBR: saza@webrtc.org
> Bug: webrtc:5298
> Change-Id: Ia19940f3abae048541e6716d0184b4caafc7d53e
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163986
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30149}
Bug: webrtc:5298
Change-Id: I6db03628ed3fa2ecd36544fe9181dd8244d7e2df
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165760
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30295}
The test is likely timing out on iOS simulator (see bug). Maybe I'm
going a bit overboard here :) if you want to keep all the cases I
removed, you can run some cases in one test method and the others in
another test method. Are the cases I removed particularly important?
Bug: webrtc:11284
Change-Id: I8f2e8830f931594c3471d1c20a2654e258b9fcf0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166169
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30277}
This CL was generated by running:
git ls-files | grep ".cc" | xargs perl -i -ne 'BEGIN {undef $/}; s/("[\s\n]*<<[\s\n]*")/" "/g; print;'; git cl format
After that I manually edited modules/audio_processing/gain_controller2.cc to preserve its original
formatting.
This primary benefit of this change is a small reduction in binary size.
Bug: None
Change-Id: I689fa7ba9c717c314bb167e5d592c3c4e0871e29
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165961
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Jonas Olsson <jonasolsson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30251}
This reverts commit f3aa6326b8.
Reason for revert: Breaks downstream project.
Original change's description:
> Replace the ExperimentalAgc config with the new config format
>
> This CL replaces the use of the ExperimentalAgc config with
> using the new config format.
>
> Beyond that, some further changes were made to how the analog
> and digital AGCs are initialized/called. While these can be
> made in a separate CL, I believe the code changes becomes more
> clear by bundling those with the replacement of the
> ExperimentalAgc config.
>
> TBR: saza@webrtc.org
> Bug: webrtc:5298
> Change-Id: Ia19940f3abae048541e6716d0184b4caafc7d53e
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163986
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#30149}
TBR=saza@webrtc.org,peah@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:5298
Change-Id: I794d2ab4b8caa5330c5ad490ba604646a249a1c1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/164530
Reviewed-by: Yves Gerey <yvesg@google.com>
Commit-Queue: Yves Gerey <yvesg@google.com>
Cr-Commit-Position: refs/heads/master@{#30153}
This CL replaces the use of the ExperimentalAgc config with
using the new config format.
Beyond that, some further changes were made to how the analog
and digital AGCs are initialized/called. While these can be
made in a separate CL, I believe the code changes becomes more
clear by bundling those with the replacement of the
ExperimentalAgc config.
TBR: saza@webrtc.org
Bug: webrtc:5298
Change-Id: Ia19940f3abae048541e6716d0184b4caafc7d53e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163986
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30149}
The two functions have a lot of shared logic and locking. This CL consolidates that into a single function.
Bug: webrtc:111235
Change-Id: Ib1c32165dbf0e212c7d4b0753bcbb5ffd05eb6fe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163022
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30144}
This CL ensures that the pre-amplifier and the high-pass filter
submodules are not reallocated more than needed.
Bug: webrtc:5298
Change-Id: I7ed23807d4d2d9fef0eda2e7dca9de9b0b1a4649
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163988
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30143}
This brings the two ProcessStream functions closer in implementation.
Additionally, the error checking that is currently done in the period of not holding the lock seems cheaper than releasing and reacquiring the capture lock.
Bug: webrtc:11235
Change-Id: Ib4afc68afb419fcabbb8cf08a3a2e61d2c12acda
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163021
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30140}
This CL ensures that the AGC2 is created and initialized only when
needed.
Apart from that, the CL also avoids a runtime-reallocation that happens
each time the setting is applied.
Bug: webrtc:5298
Change-Id: Iad9eaa05a3d0baa0788cd11b2aa17ddd8e0c509b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163987
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30139}
This CL moves the activation of the transient suppression to the APM
config.
Bug: webrtc:5298
Change-Id: Iba7975bec4654c3df8834fd5b7d1082ff53641dd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163985
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30137}
This CL changes the GetStatistics call in the audio processing module
(APM) to not aquire the render or capture locks in APM, while still
being thread-safe.
This change eliminates the risk of thread-priority inversion due to the
GetStatistics call.
Apart from the above the CL:
-Corrects the GetStatistics to not be const (it was const even though it
aquired locks).
-Slightly changes the statistics reporting, so that the stats received
may be older than the most recent stats reported.
Bug: webrtc:11241
Change-Id: I00deb5507e004cbe6e4a19a8bad357491f86f4ab
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163982
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30131}
This CL allows the noise suppressor to use the linear AEC output
for analysis whenever that is available. This will potentially
lower the risk that the noise suppressor estimates the noise
based on echo.
The feature is off by default.
Bug: webrtc:5298,b:132164318
Change-Id: Idc6c8e197d96209d213819d87a8fb2533b7303ec
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/162900
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30116}
This CL ensures that the no data vectors in the reverb computer code
are fixed. This allows arbitrary long filters to be used, and ensures
that a minimum required heap size is used.
Bug: webrtc:8671
Change-Id: I7085ed262a3f5965d796270434b6578f4030606e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/162661
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30115}
This CL moves the high-pass filter to run in the full-band domain
instead of the split-band domain.
Bug: webrtc:11193
Change-Id: Ie61f4a80afda11236ecbb1ad544bbd0350c7bbfd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161453
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30112}
from LS_INFO to LS_VERBOSE.
By default, unit tests run with logging at info level.
A random run today produced more than 70.000 lines of
output. This CL would reduce that by approximately 15.000.
Bug: none
Change-Id: Ie62708cebf109510a2443aa5ab5c4e645ffc6707
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161950
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30077}
The motivation in https://webrtc-review.googlesource.com/c/src/+/32340/3 applies here as well. We
would like to use this tool downstream.
Bug: None
Change-Id: Id5b23f792679ab9c07294bfb8e53119c423044b1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161681
Commit-Queue: Daniel Johansson <dajo@webrtc.org>
Reviewed-by: Daniel Johansson <dajo@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30051}
This CL removes the remaining settings for using the legacy AEC.
It also adds a missing printout of the enforce_high_pass_filtering
parameter in the ToString method.
Bug: webrtc:11165
Change-Id: I58f0861bf1c6cd24bd83f4d3e394653b2fab3d71
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161683
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30050}
This CL removes the deprecated legacy AEC code.
Note that this CL should not be landed before the M80 release has been cut.
Bug: webrtc:11165
Change-Id: I59ee94526e62f702bb9fa9fa2d38c4e48f44753c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161238
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30036}
This CL follows the "Rule of zero".
Those constructors made no sense compared to default generated ones,
since all members are POD.
They were introduced to quiet a memory sanitizer warning,
which apparently was misleading.
As a bonus, the struct is now movable.
Bug: webrtc:11180, webrtc:9855
Change-Id: Iff9fd950bec8040bc6e7e7ece33cc49c5f453f5d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161381
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Yves Gerey <yvesg@google.com>
Cr-Commit-Position: refs/heads/master@{#30023}
This CL ensures that the high-pass filter is on whenever the echo
controller is on. This is important as the echo controller code assumes
that the external high-pass filter is active.
The CL also corrects the ToggleAec unit test (which started failing
after this code change).
Bug: webrtc:11159, chromium:1030179
Change-Id: Ief86eda8f7c67df1c25ac1a06d2cc0778e01196d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161228
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29998}
This reverts commit 3a77f93589.
Reason for revert: The change is breaking downstream tests.
Original change's description:
> AEC3: Ensure that the high-pass filter effect is on when AEC3 is active
>
> This CL ensures that the high-pass filter is on whenever the echo
> controller is on. This is important as the echo controller code assumes
> that the external high-pass filter is active.
>
> The CL also corrects the ToggleAec unit test (which started failing
> after this code change).
>
> Bug: webrtc:11159,chromium:1030179
> Change-Id: Ie29db74bf3de6279a08564398d32d67d5e1569db
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161222
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29979}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: I78b4e397555f50898ca42c4b32fb39cf06a2541a
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:11159, chromium:1030179
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161226
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29981}
This CL adds code for doing signal-dependent downmixing
before the delay estimation in the multichannel case.
As part of the CL, the unittests of the render delay
controller are corrected. However, as that caused some of
them to fail, the CL (for now) as well disables the failing
test.
Bug: webrtc:11153,chromium:1029740, webrtc:11161
Change-Id: I0b765c28fa5e547aabd6dfbd24b626ff9a16346f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161045
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29980}
This CL ensures that the high-pass filter is on whenever the echo
controller is on. This is important as the echo controller code assumes
that the external high-pass filter is active.
The CL also corrects the ToggleAec unit test (which started failing
after this code change).
Bug: webrtc:11159,chromium:1030179
Change-Id: Ie29db74bf3de6279a08564398d32d67d5e1569db
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161222
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29979}
This adds functionality to AEC3 to produce setup-specific
default configurations that are tailored to work well for the
number of channels at hand.
The tunings are only used for the case when no echo control factory
has been provided.
Bug: webrtc:11151,chromium:1029717
Change-Id: I1bd2d10327300c7b0f3169a52bf66700b781fd6b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161086
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29972}
This CL changes the downmixing of the input to the delay estimation
for surround/stereo signals to be off by default.
A kill-switch is also added for enforcing the downmix to be on.
Bug: webrtc:10913
Change-Id: I1030fef593ba56416deeb13b80d2f3812bffb9ed
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161012
Commit-Queue: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29951}
This CL corrects the analog AGC code so that the levels are properly
aggregated and not only the level of the first channel is chosen.
It also adds a kill-switch to allow the aggrated level to be the maximum
level rather than the minimum level.
Bug: webrtc:10859
Change-Id: Ibf4fecb53cfaf0dc064c334112105bf26401f78d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/160708
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29931}
This CL removes the experimental status of the multi-channel processing
in APM, and accordingly updates the variable naming.
It also splits the activation of multi-channel processing to be separate
for render and capture.
Bug: webrtc:10859
Change-Id: I0e5d04dcb94b6637c33d97146231b8ddddbaea39
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/160707
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29926}
This CL corrects the re-initialization behavior of the analog
AGC to work correctly when the AGC is reinitialized.
Bug: webrtc:11131
Change-Id: Ie455ba3db1aa3936cbcbb2fab023528124853284
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/160650
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29924}
This CL adds a DCHECK for the deprecated 8 kHz rate in APM.
It also updates the agc fuzzer code to properly do band-split on
the signals, and not send 8 kHz signals into the AGC.
Bug: chromium:1028092,chromium:1028172
Change-Id: I1e7c8d721834310e94b0e21efea07f75da837cab
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/160600
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29914}
Implements an alternative to the dominant nearend detector.
Bug: b/130016532
Change-Id: If4867d58aad036ccf4e456ef81689b8db0284f7d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159865
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29906}
Beyond making the digital AGC1 code properly support
multichannel, this CL also
-Removes deprecated debug logging code.
-Converts the gain application to be fully in floating point
which
--Is less computationally complex.
--Does not quantize the samples to 16 bit before applying the
gains.
Bug: webrtc:10859
Change-Id: I6020ba8ae7e311dfc93a72783a2bb68d935f90c5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159861
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29886}
The changes have been shown to be bitexact on a large dataset.
Bug: webrtc:10859
Change-Id: Iedc0e9e944ebfabb717dd7fb4d2682c695da883e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159694
Reviewed-by: Benjamin Wright <benwright@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Benjamin Wright <benwright@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29883}
AECM only supports up to two capture channels, this CL extends it to arbitrary channel counts.
Bug: webrtc:10859
Change-Id: Id56ca633cd9de706fa1254bfa8153de88de0ef70
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/160340
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29880}
This CL adds proper multi-channel support to the analog AGC.
Beyond that, it prepares adding multi-channel support to the digital
AGC by removing the tight dependency between the analog and digital
AGC codes.
Bug: webrtc:10859
Change-Id: I4414ccbc3db5dbb5ae069fdf426cbd038375ca7b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159480
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29878}
This CL refactors the analog AGC functionality. In particular it:
-Breaks then tight dependency between the analog AGC and the digital
AGC implementation.
-Removes the complicated callback interface for reporting the analog
level and replaces it with an int.
Bug: webrtc:10859
Change-Id: I3572d60ab98edebbcffa25af64cc74c66f9868fc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159039
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29838}
This CL enables extracting the linear AEC output,
allowing for more straightforward
testing/development.
Bug: b/140823178
Change-Id: I14f7934008d87066b35500466cb6e6d96f811688
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153672
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29789}
This CL adds a dependecy on rtc_base/system:rtc_export to rtc_event but
only when built as part of Chromium (since rtc::Event should not be
used outside of WebRTC).
It also adds other missing RTC_EXPORTS.
Bug: webrtc:9419
Change-Id: Ib338004a5404a6b3c7929e146c29ad42572632cc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159692
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29781}
This CL changes the AGC saturation detection so that saturations only
in one mic channel is counted equally bad as saturations in more than
one channel.
Bug: webrtc:10859
Change-Id: I3cf9fce17c2dd51a70365cc408fe6276944b4b19
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159021
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29731}
Add a runtime setting that notifies play-out audio device changes.
The payload is a pair indicating a device id and its maximum play-out
volume.
kPlayoutVolumeChange is now forwarded not only to capture, but also
render (required by render_pre_processor).
Bug: webrtc:10608
Change-Id: I8997c207422c1dcd1d53775397d6290939ef3db8
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/159002
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29725}
This CL prepares parts the analog AGC code to make it properly
multichannel.
Bug: webrtc:10859
Change-Id: I693d0d004dd2c7495ebdc60a43e9a53a441a93e0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158896
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29718}
This CL adds the GRU weights memory layout optimization with which it
will be easier to add SSE2 code in a follow up CL. The new memory
layout also improves the performance of the unoptimized code.
This CL also includes a bug fix in the GRU layer input validation.
It was a silent bug since the GRU layer of the RNN VAD has the same
input and output size. This was caught by changing memory layout of
the recurrent weights. The unit test has been adapted by removing the
unused recurrent weights (the expected result does not change).
Bug: webrtc:10480
Change-Id: Ia1551abde4cb24aa7e109c4447e0fffe7c839077
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/142177
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29717}
This CL adds the SSE2 optimized implementation for fully connected
(FC) layers. The change includes a weights re-alignment op done once
at construction time. It is required in order to optimize the load op
to fill 128 bit registers.
This CL also includes unit test adaptations and a benchmark test
(disabled by default).
Bug: webrtc:10480
Change-Id: I5ed87f0a629faaaf4c8bffbce1cea5557518f8c8
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/141862
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29712}
This reverts commit 7350a90237.
Reason for revert: possibly breaking downstream projects
Original change's description:
> RNN VAD: prepare for SIMD optimization
>
> This CL adds the boilerplate for SIMD optimization of FC and GRU layers
> in rnn.cc. The same scheme of AEC3 has been used. Unit tests for the
> optimized architectures have been added (the same unoptimized
> implementation will run).
>
> Minor changes:
> - unnecessary const removed in rnn.h
> - FC and GRU test data in the anon namespace as constexpr
>
> Bug: webrtc:10480
> Change-Id: Ifae4e970326e7e7c603d49aeaf61194b5efdabd3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/141419
> Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29696}
TBR=gustaf@webrtc.org,alessiob@webrtc.org,fhernqvist@webrtc.org
Change-Id: I9ae82f4bd2d30797646fabfb5ad16bea378208b8
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10480
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158893
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29699}
This CL adds the boilerplate for SIMD optimization of FC and GRU layers
in rnn.cc. The same scheme of AEC3 has been used. Unit tests for the
optimized architectures have been added (the same unoptimized
implementation will run).
Minor changes:
- unnecessary const removed in rnn.h
- FC and GRU test data in the anon namespace as constexpr
Bug: webrtc:10480
Change-Id: Ifae4e970326e7e7c603d49aeaf61194b5efdabd3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/141419
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29696}
This change adds multichannel support to the AEC3 suppressor.
Processing of mono capture is bit-exact to the previous code.
Bug: webrtc:10913
Change-Id: I89affe3e066021bc34e4b525edf44dd3bea68365
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158882
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29692}
This is a reland of 9dda1b3a48
Original change's description:
> Correct AEC3 multichannel functionality activation
>
> This CL corrects the AEC3 multichannel activation
> to also work for the case when a factory is used
> for the activation.
>
> Bug: webrtc:10913
> Change-Id: Ic2807d8bcef759261fde14447cff30633ba248dc
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158794
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29676}
Bug: webrtc:10913
Change-Id: I1cb3d0de61ea0b299158ca85433f2442c65c196f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158886
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29690}
This is a reland of 9dda1b3a48
Original change's description:
> Correct AEC3 multichannel functionality activation
>
> This CL corrects the AEC3 multichannel activation
> to also work for the case when a factory is used
> for the activation.
>
> Bug: webrtc:10913
> Change-Id: Ic2807d8bcef759261fde14447cff30633ba248dc
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158794
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29676}
Bug: webrtc:10913
Change-Id: Ibfe4e8a51183390a4054514bb294c89c2ea201e9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158880
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29685}
This reverts commit 9dda1b3a48.
Reason for revert: The CL is causing downstream issues
Original change's description:
> Correct AEC3 multichannel functionality activation
>
> This CL corrects the AEC3 multichannel activation
> to also work for the case when a factory is used
> for the activation.
>
> Bug: webrtc:10913
> Change-Id: Ic2807d8bcef759261fde14447cff30633ba248dc
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158794
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29676}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: Ic487f77f5c11485a0f25a2a1d3797d0ec956f913
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10913
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158797
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29678}
This CL corrects the AEC3 multichannel activation
to also work for the case when a factory is used
for the activation.
Bug: webrtc:10913
Change-Id: Ic2807d8bcef759261fde14447cff30633ba248dc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158794
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29676}
This CL has two goals: (i) avoid casting and scaling of the NN weights
for every processed feature vector and (ii) prepare for SIMD
optimizations.
Bug: webrtc:10480
Change-Id: Ice7bac5657123354714cc7c63b00abbb8a76c7d7
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/141413
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Fredrik Hernqvist <fhernqvist@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29675}
Instead of having a comfort noise generator (CNG) instance per capture
channel, one instance handles CNG for all capture channels.
Bug: webrtc:10913
Change-Id: I897471be6d203ad750c517c5076d421f2ae3879b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158780
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29668}
This is a reland of 87a7b82520
Original change's description:
> Refactoring of the noise suppressor and adding true multichannel support
>
> This CL adds proper multichannel support to the noise suppressor.
> To accomplish that in a safe way, a full refactoring of the noise
> suppressor code has been done.
>
> Due to floating point precision, the changes made are not entirely
> bitexact. They are, however, very close to being bitexact.
>
> As a safety measure, the former noise suppressor code is preserved
> and a kill-switch is added to allow revering to the legacy noise
> suppressor in case issues arise.
>
> Bug: webrtc:10895, b/143344262
> Change-Id: I0b071011b23265ac12e6d4b3956499d122286657
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158407
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29646}
Bug: webrtc:10895, b/143344262
Change-Id: I236f1e67bb0baa4e30908a4cf7a8a7bb55fbced3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158747
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29663}
This reverts commit 87a7b82520.
Reason for revert: Speculative revert. Breaks downstream projects.
Original change's description:
> Refactoring of the noise suppressor and adding true multichannel support
>
> This CL adds proper multichannel support to the noise suppressor.
> To accomplish that in a safe way, a full refactoring of the noise
> suppressor code has been done.
>
> Due to floating point precision, the changes made are not entirely
> bitexact. They are, however, very close to being bitexact.
>
> As a safety measure, the former noise suppressor code is preserved
> and a kill-switch is added to allow revering to the legacy noise
> suppressor in case issues arise.
>
> Bug: webrtc:10895, b/143344262
> Change-Id: I0b071011b23265ac12e6d4b3956499d122286657
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158407
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29646}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: I4d4025bda01f484979961fe57380a705e4d78397
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10895, b/143344262
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158701
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Commit-Queue: Artem Titov <titovartem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29651}
This CL adds proper multichannel support to the noise suppressor.
To accomplish that in a safe way, a full refactoring of the noise
suppressor code has been done.
Due to floating point precision, the changes made are not entirely
bitexact. They are, however, very close to being bitexact.
As a safety measure, the former noise suppressor code is preserved
and a kill-switch is added to allow revering to the legacy noise
suppressor in case issues arise.
Bug: webrtc:10895, b/143344262
Change-Id: I0b071011b23265ac12e6d4b3956499d122286657
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158407
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29646}
This change removes the deprecated ChannelLayout versions of ProcessStream
and AnalyzeReverseStream.
Bug: webrtc:5298
Change-Id: I8a7e33e89cffac5eceecd00dfd3c96000643f51b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158529
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29641}
This tests that both the ApplyConfig() and SetRuntimeSetting() route of
APM configuration correctly induce the pre-amplifier gain effect in APM.
Bug: webrtc:11045
Change-Id: Iddaa1c19487c6f68ed6eb1be6913ec2dfd284b04
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/158083
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29607}
Adding a version of AnalyzeReverseStream with audio parameters
described by StreamConfig. This is part of preparations for
multichannel APM in Chromium.
Bug: webrtc:10913
Change-Id: I7c4650eab8bd7fcdec970a7e4a8fa203f09bed9e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/157897
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29573}
It is unclear what configuration the APM is running with.
This CL helps some of that. Note that the webrtc::Config
is still not reported.
Bug: webrtc:5298
Change-Id: Icc2cf0b20634c04d567c0951a57ba6fe7aa5c5b4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/157423
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29555}
Since rtc_base/ignore_wundef.h doesn't have any dependency, it is easy to
move it to its own target and allow its dependant to avoid to take a
dependency rtc_base:on rtc_base_approved.
Bug: webrtc:9419
Change-Id: I17f205b0cb2b21cad388b04e60082df9398dffdf
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/157428
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29548}
The estimator will simply compute the worst value of all combinations
of render and capture signal.
This has the drawback that low-volume or silent render channels may
severely misestimate the ERL.
The changes have been shown to be bitexact over a large dataset.
Bug: webrtc:10913
Change-Id: Id53c3ab81646ac0fab303edafc5e38892d285d8e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/157308
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29542}
All submodule pointers are now private.
The unique_ptr to a ApmPrivateSubmodules is replaced by a direct member
object.
The main outcome of this CL is that the code is nicer.
Bug: webrtc:5298
Change-Id: Ib8ef70a35a64b875752d2a318c572d152d51487a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/157440
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29539}
This CL contains various cleanups/corrections to the multichannel AEC
code.
The changes have been shown to be bitexact over a large dataset.
Bug: webrtc:10913
Change-Id: Idd3e410b04527666e052f57ad81d0ac9eef3179b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/157173
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29530}
- RenderBuffer::Spectrum() loses its channel argument, allowing for
greater flexibility in passing the multi-channel spectrum data into
functions.
- The FFT spectra lengths are made compile-time constant, rendering
some DCHECKs obsolete.
Bug: webrtc:10913
Change-Id: Ied0c50cf72d974cfef7279fd2b9c572d049b8b16
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/157104
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29528}
Static libraries don't guarantee that an exported symbol gets linked
into a shared library (and in order to support Chromium's component
build mode, WebRTC needs to be linked as a shared library).
Source sets always pass all the object files to the linker.
On the flip side, source_sets link more object files in release builds
and to avoid this, this CL introduces a the GN template "rtc_library" that
expands to static_library during release builds and to source_set during
component builds.
See: https://gn.googlesource.com/gn/+/master/docs/reference.md#func_source_set
Bug: webrtc:9419
Change-Id: I4667e820c2b3fcec417becbd2034acc13e4f04fe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/157168
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Nico Weber <thakis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#29525}
Also, change test target from rtc_static_library to rtc_source_set so that it is actually linked and run.
Bug: webrtc:11010, webrtc:11037
Change-Id: I05173718ee7de8a9fad73b62c0efd0da4d4f1a7e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/157166
Commit-Queue: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29509}
This CL corrects the EchoAudibility and StationarityEstimator
code to work properly with multiple channels.
It also changes the naming of the FilterDelayBlocks() method
to better reflect what it does.
The changes have been verified to be bitexact over a large number
of recordings.
Bug: webrtc:10913
Change-Id: I070b531efcdff4c33f70fd5b37fbb556dcebe5b4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/156565
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29482}
This CL adds support for multiple channels in the reverb
modelling. As a side effect, it also partly adds multi-channel
supports for the sections of the code.
Beyond adding the multi-channel support, a bug is fixed as part of
this CL. Since the bug fix affects the bitexactness, as a safety
precaution the CL includes the ability to override the bugfix.
Apart from the contributions from the bugfix, the changes have
been verified to be bitexact for a large set of mono recordings.
Bug: webrtc:10913
Change-Id: I1f307b532be85ef4182f8db41384f44d40a25219
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/156382
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29456}
The new configuration path is via AudioProcessing::ApplyConfig and
AudioProcessing::GetStatistics.
Bug: webrtc:9878
Change-Id: Ic912d67455fcef4895566edb8fef62baf62d7cfe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/156440
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29454}
This change fixes an issue with bypass of unnecessary resampling
when using ProcessStream(AudioFrame*).
Bug: b/130016532
Change-Id: I887f05d55aaa47f21164ba237cf83d0be33a1fd5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/156540
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29446}
This change keeps the original 48 kHz signal and uses it for the
fullband processing given that the following requirements are
fulfilled:
- Input signal is 48 kHz
- Output signal is 48 kHz
- Multiband processing is performed at 32 kHz
- The multiband processing does not modify the original signal
This avoids unnecessary, lossy resampling and band merging.
Bug: b/130016532
Change-Id: I690c26faba07eab0cbff6c0a95a81d89255dd1a1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155966
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29425}
This CL passes the spectral power estimates for all channels into
the AecState.
Bug: webrtc:10913
Change-Id: Ie3b5c443be0c63f205e23ed2bfea06d9c447eb39
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/156165
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29417}
The audio processing in the band-split domain on ARM platforms
operate at a sampling frequency of 32 kHz. This CL upsamples
the signal to fullband before the "fullband processing"
if an output rate of 48 kHz is chosen.
Change-Id: I268acd33aff1fcfa4f75ba8c0fb3e16abb9f74e8
Bug: b/130016532
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155640
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29415}
This CL removes the redundant class in preparation
for adding multichannel functionality to the
reverb computation.
The changes are bitexact.
Bug: webrtc:10913
Change-Id: I284665f7143cb5e1c79bfa573638fdff5f2411c9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155960
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29414}
Multi-channel behaviors introduced in this CL:
- All filters are analyzed independently. The filtering is considered
consistent if any filter is consistent.
- The filter echo path gain used to detect saturation is maxed across
capture channels.
- The filter delay is taken to be the minimum of all filters:
Any module that looks in the render data starting from the filter
delay will iterate over all render audio present in any channel.
- The FilterAnalyzer will consider a render block to be active if any
render channel has activity.
The changes in the CL has been shown to be bitexact on a
large set of mono recordings.
Bug: webrtc:10913
Change-Id: I1e360cd7136ee82d1f6e0f8a1459806e83f4426d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155363
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29408}
This CL adds support for multichannel in the residual echo
estimator code. It also adds placeholder functionality in
the surrounding code to ensure that the residual echo
estimator receives the require inputs.
The changes in the CL has been shown to be bitexact on a
large set of mono recordings.
Bug: webrtc:10913
Change-Id: I726128ca928648b1dcf36c5f479eb243f3ff3f96
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155361
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29400}
The new configuration path is via AudioProcessing::ApplyConfig and
AudioProcessing::GetStatistics.
ApmTest.Process passes with unchanged reference files if
audio_processing_impl would initialize the VAD with
VoiceDetection::kLowLikelihood instead of kVeryLowLikelihood.
This was verified by testing this CL with that modification.
Bug: webrtc:9878
Change-Id: I4d08df37a07e5c72feeec02a07d6b9435f917d72
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155445
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29395}
This CL adds support in the echo subtractor for handling multiple
capture and render channels.
The changes have passed bitexactness tests for substantial set
of mono recordings.
Bug: webrtc:10913
Change-Id: Ib448c9edf172ebc31e8c28db7b2f2a389a53adb9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155168
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29389}
This CL contains the first step of adding multi-channel support to the
echo subtractor.
The CL is bitexact for the mono case.
Bug: webrtc:10913
Change-Id: I10647b45c692bc001407afc6ff00e26a3e2cffaa
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/154356
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29303}
Simplifying the use of signal transition and removing unused code.
Bug: webrtc:8671
Change-Id: I0b845405727936b2fa7df7c92ad2e83bea3bc823
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/154348
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29298}
Suppression filter is extended to support the synthesis
of multiple channels. This CL is also a major clean-up of ApplyGain.
The CL has been tested for bit-exactness for single channel output.
Bug: webrtc:10913
Change-Id: I1319f127981552e17dec66701a248d34dcf0e563
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/154341
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29284}
Echo remover processes all microphone signals. Suppression gains are
computed separately for each capture signal. The minimum gains determine
the final suppression gains applied.
Only the first channel is synthesized. A follow-up CL will add the
synthesis of the remaining channels.
Bug: webrtc:10913
Change-Id: Ife7e74c9a9c6c208fca3992e3cfa840b6b7afcfa
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153526
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29269}
Currently, APM fakes multichannel in two ways:
- With injected AECs, capture processing is only performed on the left
channel. The result is copied into the other channels.
- With multichannel render audio, all channels are mixed into one
before analysing.
This CL adds a flag to disable these behaviors, ensuring proper
multichannel processing happens throughout the APM pipeline.
Adds killswitches to separately disable render / capture multichannel.
Additionally - AEC3 currently crashes when running with multichannel.
This CL adds the missing pieces to at least have it run without
triggering any DCHECKS, including making the high pass filter properly
handle multichannel.
Bug: webrtc:10913, webrtc:10907
Change-Id: I38795bf8f312b959fcc816a056fba2c68d4e424d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152483
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29248}
This CL allows the user to have more refined control over what band
splitting-scheme is used inside the audio processing module.
Bug: webrtc:6181
Change-Id: I236c3b1f96ab80cc4ffb8c39c045c034764567a1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152480
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29189}
In this CL:
- Render signal analyzer considers a frequency bin a narrow band
(peak) if any channel exhibits narrowband (-peak) behavior.
- The unit tests have to fill frames with noise because small
inaccuracies in the FFT spectrum lead to consistent "narrow bands"
despite spectrum being essentially flat.
Bug: webrtc:10913
Change-Id: I8fa181412c0ee1beeacfda37ffef18251d5f0cd7
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151912
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29176}
This CL introduces the handling of multiple microphone channels in
the EchoRemover layer.
The implementation is done such as to support an arbitrary number of
channels in a way that balances stack and heap-space usage.
Bug: webrtc:10913
Change-Id: I475369de6c463b8fe2d7e53799d7322eefb6938f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151647
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29140}
Multichannel signals are downmixed to mono before decimation and
delay estimation. This is useful when not all channels play
audio content. The feature can be toggled in the AEC3 configuration.
Bug: webrtc:10913
Change-Id: I7d40edf7732bb51fec69e7f3ca063d821c5069c4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151762
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29126}
This CL reduces the complexity and heap usage of the adaptive filter
in AEC3 by avoiding to compute these for the shadow
filter. In particular it
-Moves to compute the ERL, frequency response and impulse response
on an on-demand basis.
-Stores the ERL, frequency response and impulse response outside
of the adaptive filter.
All the changes have been tested for bitexactness on a sizeable
amount of recordings.
Bug: webrtc:10913
Change-Id: If83c236a6e3f2e489be129b9ebf6143a72f521d1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151138
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29081}
All channels are populated by RenderDelayBuffer. but all other
dependent modules are hardcoded to do their regular mono processing
on the first channel.
Bug: webrtc:10913
Tested: Bitexactness on a large set of aecdumps
Change-Id: I11d11aa0ad3da0f244c0ec020d2c9f0f4a735834
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151640
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29079}
The VectorBuffer and MatrixBuffer names are too generic for their use case.
Bug: webrtc:10913
Change-Id: Ideecd0d27e07487a85a61dc6474e69733d07dcd6
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151602
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29076}
All dependent modules are hardcoded to do their regular mono processing on the first channel.
This _almost_ makes RenderBuffer multi-channel: FftData is still only mono.
Bug: webrtc:10913
Change-Id: Id5cc34dbabfe59e1cc72a9675dc7979794e870ed
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151139
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29074}
This CL propagates the number of render and capture channels into
the echo subtractor and the adaptive filters.
Bug: webrtc:10913
Change-Id: I5ffff24ff64b7cc0f262bf008b34b6dfca1e78f9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151300
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29059}
This is a reland of a66395e72f
Original change's description:
> Reland "Add core multi-channel pipeline in AEC3 This CL adds basic the basic pipeline to support multi-channel processing in AEC3."
>
> This is a reland of f3a197e553
>
> Original change's description:
> > Add core multi-channel pipeline in AEC3
> > This CL adds basic the basic pipeline to support multi-channel
> > processing in AEC3.
> >
> > Apart from that, it removes the 8 kHz processing support in several
> > places of the AEC3 code.
> >
> > Bug: webrtc:10913
> > Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> > Commit-Queue: Per Åhgren <peah@webrtc.org>
> > Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#29017}
>
> Bug: webrtc:10913
> Change-Id: Ifc4b13bd994cfd22dca8f8755fa5700617cc379d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151124
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29034}
Bug: webrtc:10913
Change-Id: Id8da5666df8c86f290c73ad5dc9958199f1a7ebe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151127
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29042}
This is a reland of f3a197e553
Original change's description:
> Add core multi-channel pipeline in AEC3
> This CL adds basic the basic pipeline to support multi-channel
> processing in AEC3.
>
> Apart from that, it removes the 8 kHz processing support in several
> places of the AEC3 code.
>
> Bug: webrtc:10913
> Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29017}
Bug: webrtc:10913
Change-Id: Ifc4b13bd994cfd22dca8f8755fa5700617cc379d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151124
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29034}
This reverts commit f3a197e553.
Reason for revert: Speculative revert, as this may'be broken some build bots
Original change's description:
> Add core multi-channel pipeline in AEC3
> This CL adds basic the basic pipeline to support multi-channel
> processing in AEC3.
>
> Apart from that, it removes the 8 kHz processing support in several
> places of the AEC3 code.
>
> Bug: webrtc:10913
> Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29017}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: I877d2993b9ccf024bd1d57bca1513c3e24d0bed3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10913
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150940
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29022}
This CL adds basic the basic pipeline to support multi-channel
processing in AEC3.
Apart from that, it removes the 8 kHz processing support in several
places of the AEC3 code.
Bug: webrtc:10913
Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29017}
This CL increases the maximum supported sample rate so that all rates
up to 384000 Hz are handled.
The CL also adds tests that verifies that APM works as intended for
different combinations of number of channels and sample rates.
Bug: webrtc:10882
Change-Id: I98738e33ac21413ae00fec10bb43b8796ae2078c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150532
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29014}
This CL corrects the way the audio processing module handles sample rates that
don't allow partitioning the data into evenly sized 10 ms chunks, examples
being 22050 Hz and 11025 Hz.
Bug: webrtc:10882
Change-Id: I35d738f8a0e1debc443fe5d473c0d666a7ba8d98
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150526
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28953}
This CL removes and replaces the legacy fixed-point high-pass filter in
APM with the floating point high-pass filter in AEC3.
Bug: webrtc:10907
Change-Id: I88cf8f622ab139e4ffa97f89a72425aa3becfc58
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150103
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28950}
This is a reland of b7b8e30cb4
Original change's description:
> Reland Process 8 kHz audio as 16 kHz internally of the audio processing module
>
> This CL relands the code from the CL "Process 8 kHz audio as 16 kHz internally
> of the audio processing module" which by mistake was reverted via a rebase in
> another CL.
>
> The CL changes the behavior of APM for 8 kHz so that it is internally
> processed as 16 kHz.
>
> Bug: webrtc:10863
> Change-Id: I32a57b2d279c2134125667c19b09cfda381a33c3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150221
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28944}
Bug: webrtc:10863
Change-Id: Ic626b99b099248f0d8a677dc4cfe1505e14ae7cd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150330
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28949}
This reverts commit b7b8e30cb4.
Reason for revert: Broke ApmTest.Process test in internal iOS waterfall
Original change's description:
> Reland Process 8 kHz audio as 16 kHz internally of the audio processing module
>
> This CL relands the code from the CL "Process 8 kHz audio as 16 kHz internally
> of the audio processing module" which by mistake was reverted via a rebase in
> another CL.
>
> The CL changes the behavior of APM for 8 kHz so that it is internally
> processed as 16 kHz.
>
> Bug: webrtc:10863
> Change-Id: I32a57b2d279c2134125667c19b09cfda381a33c3
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150221
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28944}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: Ia49e07b0c25c49da646917516e317f1d57cc4e84
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10863
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150326
Reviewed-by: Artem Titarenko <artit@webrtc.org>
Commit-Queue: Artem Titarenko <artit@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28948}
This CL relands the code from the CL "Process 8 kHz audio as 16 kHz internally
of the audio processing module" which by mistake was reverted via a rebase in
another CL.
The CL changes the behavior of APM for 8 kHz so that it is internally
processed as 16 kHz.
Bug: webrtc:10863
Change-Id: I32a57b2d279c2134125667c19b09cfda381a33c3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150221
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28944}
This is a reland of 81c0cf287c
Original change's description:
> Simplification and refactoring of the AudioBuffer code
>
> This CL performs a major refactoring and simplification
> of the AudioBuffer code that.
> -Removes 7 of the 9 internal buffers of the AudioBuffer.
> -Avoids the implicit copying required to keep the
> internal buffers in sync.
> -Removes all code relating to handling of fixed-point
> sample data in the AudioBuffer.
> -Changes the naming of the class methods to reflect
> that only floating point is handled.
> -Corrects some bugs in the code.
> -Extends the handling of internal downmixing to be
> more generic.
>
> Bug: webrtc:10882
> Change-Id: I12c8af156fbe366b154744a0a1b3d926bf7be572
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149828
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28928}
Bug: webrtc:10882
Change-Id: I2ddf327e80a03468c41662ae63c619ff34f2363a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150101
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28938}
This reverts commit 81c0cf287c.
Reason for revert: internal test failures
Original change's description:
> Simplification and refactoring of the AudioBuffer code
>
> This CL performs a major refactoring and simplification
> of the AudioBuffer code that.
> -Removes 7 of the 9 internal buffers of the AudioBuffer.
> -Avoids the implicit copying required to keep the
> internal buffers in sync.
> -Removes all code relating to handling of fixed-point
> sample data in the AudioBuffer.
> -Changes the naming of the class methods to reflect
> that only floating point is handled.
> -Corrects some bugs in the code.
> -Extends the handling of internal downmixing to be
> more generic.
>
> Bug: webrtc:10882
> Change-Id: I12c8af156fbe366b154744a0a1b3d926bf7be572
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149828
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28928}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: I2729e3ad24b3a9b40b368b84cb565c859e79b51e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10882
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150084
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Commit-Queue: Steve Anton <steveanton@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28931}
This CL changes the behavior of APM for 8 kHz so that it is internally
processed as 16 kHz.
Bug: webrtc:10863
Change-Id: Ie17de6551c6e984b60534820374a49ca298f06ce
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/148800
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28929}
This CL performs a major refactoring and simplification
of the AudioBuffer code that.
-Removes 7 of the 9 internal buffers of the AudioBuffer.
-Avoids the implicit copying required to keep the
internal buffers in sync.
-Removes all code relating to handling of fixed-point
sample data in the AudioBuffer.
-Changes the naming of the class methods to reflect
that only floating point is handled.
-Corrects some bugs in the code.
-Extends the handling of internal downmixing to be
more generic.
Bug: webrtc:10882
Change-Id: I12c8af156fbe366b154744a0a1b3d926bf7be572
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149828
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28928}
This CL is a no-op since rtc_use_lto is always false and in general
such change should probably be implemented in
//build/config/compiler/BUILD.gn.
Bug: chromium:408997
Change-Id: Id37d3181e66e699f8cd535aee1af7609352a7259
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149833
Reviewed-by: Niels Moller <nisse@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28919}
This CL removes all external access to the integer sample data in the
AudioBuffer class. It also removes the API in AudioBuffer that provides this.
The purpose of this is to pave the way for removing the sample
duplicating and implicit conversions between integer and floating point
sample formats which is done inside the AudioBuffer.
Bug: webrtc:10882
Change-Id: I1438b691bcef98278aef8e3c63624c367c2d12e9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149162
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28912}
This CL changes the way that values are converted
between fixed and floating point to
-Avoid the former asymmetric conversion causing
nonlinear distortions.
-Reduce the complexity.
In contrast to the initial CL, the DCHECKS on the incoming sample
range was changed to limiting.
Bug: webrtc:6594
Change-Id: I8218dfd5c45388ad5aac61be453d2f28725a2475
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132783
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Original-Commit-Position: refs/heads/master@{#28867}
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149169
Cr-Commit-Position: refs/heads/master@{#28897}
This change fixes a bug where the initial delay could be set incorrectly.
Bug: webrtc:10896
Change-Id: I66b2234b69c46639488f4561e973384001230861
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149820
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28894}
This reverts commit 67e43c8b95.
Reason for revert: speculative revert since we see failing bots on Android after this change
https://ci.chromium.org/p/chromium/builders/webrtc.fyi/WebRTC%20Chromium%20FYI%20Android%20Tests%20%28dbg%29%20%28K%20Nexus5%29/4124
Original change's description:
> Correct conversion between float and fixed formats
>
> This CL changes the way that values are converted
> between fixed and floating point to
> -Avoid the former asymmetric conversion causing
> nonlinear distortions.
> -Reduce the complexity.
>
> Bug: webrtc:6594
> Change-Id: I64d0cc31c5d16f397686a59a062cfbc4b336d94d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132783
> Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28867}
TBR=henrik.lundin@webrtc.org,gustaf@webrtc.org,peah@webrtc.org
Change-Id: Id828a09de7075e48556fe2d0beba7a0c6ec227f6
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:6594
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149165
Reviewed-by: Henrik Andreassson <henrika@webrtc.org>
Commit-Queue: Henrik Andreassson <henrika@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28872}
This CL changes the way that values are converted
between fixed and floating point to
-Avoid the former asymmetric conversion causing
nonlinear distortions.
-Reduce the complexity.
Bug: webrtc:6594
Change-Id: I64d0cc31c5d16f397686a59a062cfbc4b336d94d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132783
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28867}
This CL moves/removes all code from the AudioBuffer that:
-Is not directly handling audio data (e.g., keytaps, VAD descisions).
-Is caching aggregated versions of the rest of the audio data.
-Is not used (or only used in testing)
Bug: webrtc:10882
Change-Id: I737deb3f692748eff30f46ad806b2c6f6292802c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149072
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28866}
This CL adds the following options:
pass an input AEC dump as a string (currently, the tool can only accept a path to an AEC dump file)
write the processed capture samples to a given vector
Bug: webrtc:10808
Change-Id: I02863c97ec3cd8c03ade2ea8521836f2e7417050
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/145208
Commit-Queue: Sonia-Florina Horchidan <soniahorchidan@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28826}
This change reduces the level of several non-critical log messages in
order to reduce log spamming.
Bug: webrtc:8671
Change-Id: I6faae7a2ae4eeafd18c2770208485a75ad946e20
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/148528
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28809}
This CL removes a long unused fallback behavior for the reverb
computation.
Bug: webrtc:8671
Change-Id: I4b57795a9bb33769237858f40392881ee235653e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/148520
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28802}
This is the last CL required to migrate WebRTC to ABSL_FLAG, rtc::Flag
will be removed soon after this one lands.
Bug: webrtc:10616
Change-Id: I2807cec39e28a2737d2c49e2dc23f2a6f98d08f0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/145727
Reviewed-by: Tommi <tommi@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28606}
Make the GN conditionals match what happens in sources, or the other way around. Include headers only when they're used.
Bug: None
Change-Id: Ib8e3346e3c24eaa7e61ac4776dcd66efe2cc5c65
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/144880
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Andreassson <henrika@webrtc.org>
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Commit-Queue: Oleh Prypin <oprypin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28500}
The last run-time logic for selecting function pointers was removed in
May 2016, here: https://codereview.webrtc.org/1955413003
It would be even better if we could eliminate the function pointers
entirely and just have different implementations that we select at
compile time; I've left a TODO asking for this.
Bug: webrtc:9553
Change-Id: Ica71d71e19759da00967168f6479b7eb8b46c590
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/144053
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28414}
Only remaining user is WavReader. Demote its constructor
accepting a PlatformFile to private, to refactor implementation
in a later cl.
Bug: webrtc:6463
Change-Id: I7b950be6f02073cb135dd0fab1190b9dc0de1fba
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/144025
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28410}
It seems unnecessary to lock it if not actually reinitializing.
Bug: webrtc:10205
Change-Id: Ib3292e1d640a92a7df77400aebe9583cf877f824
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/115460
Commit-Queue: Oskar Sundbom <ossu@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28060}
Add a PlayoutVolumeChange RuntimeSetting. Trigger an echo path change when the playout volume is changed.
Bug: webrtc:10608
Change-Id: I1e736b93c1865d08c7d2582f6fe00216c1e1f72e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/135746
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Fredrik Hernqvist <fhernqvist@webrtc.org>
Commit-Queue: Fredrik Hernqvist <fhernqvist@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27913}
Use the C++-style stdlib headers, add `std::` prefix, in order to avoid implicit casts to double.
Bug: None
Change-Id: I78d9caaee715be341d2480c6d5e769068966d577
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133625
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Oleh Prypin <oprypin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27905}
This CL removes the redundant enable flags from AEC2 and AECM
Bug: webrtc:5298
Change-Id: Icc575abf1c368dda02ca77f057d166f1c921f662
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/135100
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27848}
This CL removes the legacy reporting of histogram data for AEC2.
Bug: webrtc:5298
Change-Id: I838e729e0fb78d28e16de0fa79ddf5c857682d65
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/135101
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27834}
- add test that checks that the computed VAD probability is within
tolerance *1
- speed-up some tests by reducing the input length and skipping frames
- remove unused code in test_utils
- fix some comments
*1: RnnVadTest::RnnBitExactness is replaced by
RnnVadTest::RnnVadProbabilityWithinTolerance
Bug: webrtc:10480
Change-Id: I19332d06eacffbbe671bf7749ff4c92798bdc55c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133910
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27803}
This CL ensures that the AECm is only created when needed.
The changes in the CL are bitexact when running AECm via
audioproc_f
The CL also corrects an issue where there is a risk for
AEC2 to not be correctly setup when the sample rate
changes inbetween activations.
Bug: webrtc:8671
Change-Id: Id3b33e20969b1543e28c885d47495246cfbe549d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134216
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27800}
This CL extends the supported runtime settings in
APM to also comprise the AGC2 fixed gain.
The CL was originally created by Adam Whiteside.
Bug: webrtc:10574
Change-Id: I79b3d6501f1e202b66a9b6018f8a493a56b01f62
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134101
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27782}
This CL ensures that the AEC2 is only created when needed.
The changes in the CL are bitexact when running AEC2 via
audioproc_f
Bug: webrtc:8671
Change-Id: I5f6d33e45a7031c69ac53098781635c415668e49
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129740
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27772}
The one with enum.IntFlag is not feasible. An attempt is done here:
https://webrtc-review.googlesource.com/c/src/+/133884
It requires re-writing QualityAssessment to Python3 which is too much
work for little benefit. (I tried, but couldn't get the unit-tests to
pass for both 2 and 3.)
The second one is not a real todo.
TBR=alessiob@webrtc.org
NOPRESUBMIT=True
Bug=None
NOTRY=True
Change-Id: Ia25817533cd504c30490f86e4058f0b2d59dd39c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133908
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27715}
The acoustic echo canceler AEC2 is being deprecated. The routing for reporting these metrics as UMA stats has outlived the metrics'usefulness.
Bug: webrtc:10563
Change-Id: Ib96693dfc43e25a0cfecad7d5d2043116ca7e6b5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133573
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27699}
As non-linear mode uses a suppressed version of y (not e) as output, this change
uses Y2, rather than E2, as nearend spectrum when computing the suppression gains.
E2 is still used in linear mode.
This change also affects how the minimum suppression gains are calculated. The
minimum gain is now min_echo_power / weighted_residual_echo.
Bug: webrtc:10550
Change-Id: I2904c5a09dd64b06bf25eb5a37c18dab50297794
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133023
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27629}
This CL changes the APM unittests to use AEC3 instead of
AEC2.
Bug: webrtc:8671
Change-Id: I80f88dbafb7c31696abd8b7efb5a187a9fb30d1c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129420
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27607}
This CL allows audioproc_f to overrule any runtime settings for the
pre-amplifier gain that are present in the aecdump file.
Bug: webrtc:10546
Change-Id: I74dbf8d043f59b516bf0abc80f266e965af0754d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132558
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27598}
* This is too brittle and might clash with MSVC's M_PI. See [1].
* We only used it once (in a unit test).
* We shouldn't use PI anyway [2].
Instead, pull it from <cmath> with _USE_MATH_DEFINES,
like it's already done in the code base.
[1] https://ci.chromium.org/p/webrtc/builders/try/win_x86_msvc_rel/6844
[2] https://tauday.com/tau-manifesto
Bug: webrtc:9855
Change-Id: I7a6976240604ef367ea07478d8cb5e4020e5dfeb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132548
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Yves Gerey <yvesg@google.com>
Cr-Commit-Position: refs/heads/master@{#27597}
This CL corrects the minimum bound for the estimated
comfort noise level.
Bug: webrtc:10533
Change-Id: I473275ffbc7bb52572315849f30e13b764109d92
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132003
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27567}
The configuration parameter filter.use_linear_filter can be used to
disable the linear filtering. Disabling the linear filter is equivalent
to runing in non-linear mode.
Bug: b/130016532
Change-Id: I8ffdf474822888b9915444bba6cc1c25ec1efe5a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132552
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27566}
This CL replaces KissFFT with PFFFT for the spectral features
computation.
Remarks:
- Extra FFT output vector copy eliminated
- Scaling and windowing merged into a single vector for efficiency
- Nyquist frequency hack to keep the iteration in
BandFeaturesExtractor::ComputeSpectralCrossCorrelation simple
Bug: webrtc:9577, webrtc:10480
Change-Id: I436563bd257f66a243f5402be270ffcf859bd184
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/130221
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27536}
This CL refactors the computation of band energy and spectral
cross-correlation coefficients by moving and optimizing
the code from ComputeBandCoefficients, ComputeBandEnergies and
ComputeSpectralCrossCorrelation into a single class (named
BandFeaturesExtractor).
This change will also help replacing FFT library in the RNN VAD.
Bug: webrtc:10480
Change-Id: I6cefa23e8f3bc8de6eb09d3ea434699d5e19124e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129726
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27535}
Semi-automatically created with:
git grep -l " testing::" | xargs sed -i "s/ testing::/ ::testing::/g"
git grep -l "(testing::" | xargs sed -i "s/(testing::/(::testing::/g"
git cl format
After this, two .cc files failed to compile and I have fixed them
manually.
Bug: webrtc:10523
Change-Id: I4741d3bcedc831b6c5fdc04485678617eb4ce031
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132018
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27526}
This change makes it possible to disable AEC3's render delay
controller and delay estimator, and instead rely on an external
delay estimator. The delay is communicated via SetAudioBufferDelay.
When the feature is enabled, no echo removal will be performed
until the first delay is provided.
The delay is
Bug: b/130016532
Change-Id: I16643109d78d770ff1d2713cf247b0b9cce1bc1c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131327
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27467}
This CL extends, and partly corrects, the benchmarking
code in audioproc_f to provide statistics for the API
call durations in audioproc_f
Bug: chromium:939791
Change-Id: I4c26c4bb3782335f13dd3e21e6f861842539ea62
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129260
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27443}
This change removes the (unused) ability of EchoRemover overriding
the delay of the RenderDelayController. The change is tested for
bit-exactness.
Bug: webrtc:8671
Change-Id: I188ef740f1437de64ffe236d07a7dcd4128192c2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/130518
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27414}
And delete corresponding dependencies on :webrtc_common. After this
change, common_types.h is included directly only from code in the
following directories:
api/
api/video/
api/video_codecs/
common_video/libyuv/include/
media/base/
modules/remote_bitrate_estimator/
modules/rtp_rtcp/source/
modules/video_coding/codecs/vp9/
There remains plenty of indirect dependencies on the types declared in
common_types.h, but the fewer direct dependencies should make it
easier to find the proper place for each type.
Bug: webrtc:5876
Change-Id: I93e8f214025ecb613c19fdec2015bd3f96c59aae
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/130501
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27376}
This change prevents FilterAnalyzer from accessing memory out-of-bounds
when the filter is resized.
Bug: chromium:946439
Change-Id: I7e2392c8b1ff0ff55566c663bf6d7a40d7754501
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129928
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27318}
The pointer-to-submodule interfaces are being removed.
This CL:
1) introduces AudioProcessing::Config::GainController1 with most config,
2) adds functions to APM for setting and getting analog gain,
3) creates a temporary GainControlConfigProxy to support the transition
to the new config.
4) Moves the lock references in GainControlForExperimentalAgc and
GainControlImpl into the GainControlConfigProxy, as it becomes the
sole AGC object with functionality exposed to the client.
Bug: webrtc:9947, webrtc:9878
Change-Id: Ic31e15e9bb26d6497a92b77874e0b6cab21ff2b2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126485
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27316}
In this CL bounds are added to the index used for accessing the filter frequency response. That vector has always a capacity in memory equal to the final number of blocks of the main filter. However, at the initial part of the call or after an echo path change, a transition phase is started and a filter with a lower number of blocks is used and, therefore, its size is lower than that capacity during that transition phase.
Bug: webrtc:10463
Change-Id: I6ebfdea43047a3fa993a27f2c52bb3024df84ffe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/128777
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27264}
This CL replaces death tests placed inside a loop with a parametric test.
A better option is to mock Pffft::IsValidFftSize and test CreatePffftWrapper
when the former returns false. However, that would require to define an
interface for the PFFFT wrapper.
Bug: webrtc:10426
Change-Id: I3c49f1b271c8bf0099a4846014bef021676ef3e0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/128862
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27260}
This CL removes parameters for AEC3 which are no longer used. To reflect
that change, one of the parameters also is renamed
Bug: chromium:941949,webrtc:8671
Change-Id: I26609b396fa14ecb7523eebfe531a1338718103b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/127780
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27128}
This change reduces the risk of echo due to noise in the headroom
of the linear filter.
Changes:
- Use shorter delay headroom
- Delay headroom is specified in samples (not blocks)
- No hysteresis limit when delay is reduced
Bug: chromium:119942,webrtc:10341
Change-Id: I708e80e26d541dff8ca04b6da2d346a1d59cbfcb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126420
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27126}
This adds a flag to audioproc_f to generate a custom call order
file from an AEC dump. This file can be used to get more realism
when simulating with wav-files.
Bug: webrtc:10393
Change-Id: I245533d18affaab2f6cef53138332d7d83c71822
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126782
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27104}
Since there is no way to enable/disable these diagnostics at runtime,
this CL moves the suppression into the rtc_* templates in order to
remove the need to explicitly add the snippet of code needed to
suppress it (currently copy/pasted in 144 locations).
The diagnostic that causes the most problems is the one about "complex
class/struct explicit ctor/dtor" [1] because WebRTC doesn't find
it useful enough.
Other diagnostics are good (for example the one that warns about
using "virtual" instead of "override", but that will be covered by
this clang-tidy check [2]) while others are Chromium related so
they have never triggered.
[1] - https://cs.chromium.org/chromium/src/tools/clang/plugins/FindBadConstructsConsumer.cpp?l=147-167&rcl=b4bebe1aa15dba7ca5fcc6456a81a55665327c3a
[2] - https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-override.html
Bug: webrtc:163
Change-Id: Icbf27efa5b369100a31e6a32df1a0913729b3b34
Reviewed-on: https://webrtc-review.googlesource.com/c/125088
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26918}
This CL adds a temporary flag for specifying that the legacy AEC2 should
be used.
Bug: webrtc:10366
Change-Id: Ie3edaa1560cdc1282b62242beb67aa6fee7f2841
Reviewed-on: https://webrtc-review.googlesource.com/c/124980
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26891}
Import proto_library.gni when rtc_enable_protobuf is true instead of when
build_with_mozilla is false.
Makes it maybe easier to reason about the intention (e.g. intention is to not
compile any protobuf in, hence flag rtc_enable_protobuf)
The build file could not work if build_with_mozilla = true but
rtc_enable_protobuf = true.
Bug: webrtc:10338
Change-Id: I26e5983bd1519aa46c308b11796d518de5ef7597
Reviewed-on: https://webrtc-review.googlesource.com/c/123763
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26868}
Pretty-Fast Fast Fourier Transform is a 3rd party FFT C library meant to
replace other FFT libraries in WebRTC (see https://crbug.com/webrtc/9577).
This CL adds a WebRTC wrapper meant to be used inside the Audio Processing
Module (APM). As a first step, it only supports aligned memory allocated
via PFFFT. Support for the C++ standard library containers will be done
afterwards since it requires careful investigation and benchmarking (because
PFFFT uses SIMD optimizations).
The wrapper pre-allocates a scratch buffer to avoid VLA.
Bug: webrtc:9577
Change-Id: Ied00c3d3b1df292024f608ccf0ed1917d6e92e56
Reviewed-on: https://webrtc-review.googlesource.com/c/122563
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Max Morin <maxmorin@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26808}
In this CL we avoid the propagation of the echo control factory to the AudioProcessing instance when this is not set. That propagation was unnecessarily overriding the echo control factory that might have been already set on that AudioProcessing instance.
Change-Id: Ife8f479bc7a81c35ecf656e7d0ddfcc98981c74f
Bug: webrtc:10344
Reviewed-on: https://webrtc-review.googlesource.com/c/123765
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26802}
This change disables the ERLE estimation of onsets and instead assumes
minimum ERLE. This reduces the risk of echo leaks during onsets. The
estimated ERLE was sometimes incorrect due to:
- Not enough data to train on.
- Platform noise suppression can change the echo-path.
Bug: chromium:119942,webrtc:10341
Change-Id: I1dd1c0f160489e76eb784f07e99af02f44f387ec
Reviewed-on: https://webrtc-review.googlesource.com/c/123782
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26794}
The FFT output buffers sizes in SpectralFeaturesExtractor have been reduced
from N to N/2+1, where N is the audio frame size. This is required since
ComputeBandEnergies() currently calls ComputeBandCoefficients() indicating
a higher value for max_freq_bin_index, hence polluting the higher bands with
unwanted energy (coming from the symmetric conjugate copy of the Fourier
coefficients).
Bug: webrtc:10332
Change-Id: Ie080050c4f357fa95e256cf2a6bf572222e8ca44
Reviewed-on: https://webrtc-review.googlesource.com/c/123239
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Pablo Barrera González <barrerap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26761}
The lock is unnecessary and potentially unsafe:
1) All gain_control accesses in AudioProcessingImpl happen - and are intended to happen - while holding the crit_capture_ lock, and all external API calls take the same lock once inside GainControlImpl.
2) If ProcessCaptureStreamLocked (locked by crit_capture) calls a gain_control function that takes crit_render, the mandated locking order (render before capture) is violated and we might get a deadlock with the render thread.
Bug: b/123456404
Change-Id: Id7a888827e347e5e1d50e2f87d90e8b68f52b7b8
Reviewed-on: https://webrtc-review.googlesource.com/c/122087
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26637}
Googletest recently started replacing the term Test Case by Test Suite.
From now on, the preferred API is TestSuite*; the older TestCase* API
will be slowly deprecated.
This CL moves WebRTC to the new set of APIs.
More info in [1].
This CL has been generated with this script:
declare -A items
items[TYPED_TEST_CASE]=TYPED_TEST_SUITE
items[TYPED_TEST_CASE_P]=TYPED_TEST_SUITE_P
items[REGISTER_TYPED_TEST_CASE_P]=REGISTER_TYPED_TEST_SUITE_P
items[INSTANTIATE_TYPED_TEST_CASE_P]=INSTANTIATE_TYPED_TEST_SUITE_P
items[INSTANTIATE_TEST_CASE_P]=INSTANTIATE_TEST_SUITE_P
for i in "${!items[@]}"
do
git ls-files | xargs sed -i "s/\b$i\b/${items[$i]}/g"
done
git cl format
[1] - https://github.com/google/googletest/blob/master/googletest/docs/primer.md#beware-of-the-nomenclature
Bug: None
Change-Id: I5ae191e3046caf347aeee01554d5743548ab0e3f
Reviewed-on: https://webrtc-review.googlesource.com/c/118701
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26494}
The type rtc::scoped_refptr<T> is now part of api/. Please include it from
api/scoped_refptr.h.
More info: See: https://groups.google.com/forum/#!topic/discuss-webrtc/Mme2MSz4z4o.
Bug: webrtc:9887, webrtc:8205
No-Try: True
Change-Id: Ic6c7c81e226e59f12f7933e472f573ae097b55bf
Reviewed-on: https://webrtc-review.googlesource.com/c/119041
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26414}
This CL removes the legacy, no longer used, render buffering code. It
also removes four unused parameters from the AEC3 config. The change
is tested for bit-exactness.
Bug: webrtc:8671
Change-Id: I2bb6cb7a1097863f228767d757d551c00593bb00
Reviewed-on: https://webrtc-review.googlesource.com/c/119701
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26399}
In this CL a warning is avoided in the reverberation decay estimator code. The change is bitexact.
Bug: chromium:921582
Change-Id: I5a91f4b5970a21ba6da7254cf7fad8c2d0bcac4b
Reviewed-on: https://webrtc-review.googlesource.com/c/118441
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26342}
This is a reland of 80b95de765
Original change's description:
> Trim down FileWrapper class to be merely a wrapper owning a FILE*
>
> Bug: webrtc:6463
> Change-Id: If71e2f3a75dc1863bc805ab71de1e2d33294f805
> Reviewed-on: https://webrtc-review.googlesource.com/c/117881
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Alex Loiko <aleloi@webrtc.org>
> Commit-Queue: Niels Moller <nisse@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#26311}
Bug: webrtc:6463
Change-Id: I12154ef65744c1b7811974a1d871e05ed3fbbc27
Reviewed-on: https://webrtc-review.googlesource.com/c/118660
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26337}
This reverts commit 74ba99062c.
Reason for revert: Breaks downstream project.
Original change's description:
> AEC3: Lockless transfer of render data to the capture thread
>
> This CL implements a lockless queue that replaces SwapQueue
> in the RenderWriter. This avoid stalls when the render and
> capture threads are accessing the queue at the same time.
>
> Bug: webrtc:10205
> Change-Id: Ie7d6fcf9c80fad957e2a90537658fb730ca2ed72
> Reviewed-on: https://webrtc-review.googlesource.com/c/117643
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#26298}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: Ie76ee8835da4e44982d181a152c9ffa19ff33e23
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10205
Reviewed-on: https://webrtc-review.googlesource.com/c/118142
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26304}
This CL implements a lockless queue that replaces SwapQueue
in the RenderWriter. This avoid stalls when the render and
capture threads are accessing the queue at the same time.
Bug: webrtc:10205
Change-Id: Ie7d6fcf9c80fad957e2a90537658fb730ca2ed72
Reviewed-on: https://webrtc-review.googlesource.com/c/117643
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26298}
The pitch gain type in ComputePitchGainThreshold() is wrong
(size_t instead of float).
The pitch period is an unsigned integer type, but it is safer to
switch to a signed type and add checks on the sign.
Bug: webrtc:9076
Change-Id: If69d182071edab9750a320f0fbfac24aa8052ee0
Reviewed-on: https://webrtc-review.googlesource.com/c/117302
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26259}
This Config configuration will eventually replace the AudioProcessing::noise_suppression() interface.
This also introduces a proxy NoiseSuppression, returned by AudioProcessing::noise_suppression.
Without this proxy, ApplyConfig could overwrite NS settings for clients who currently use noise_suppression(). For example, the following code will not preserve the noise suppression level:
apm->noise_suppression()->set_level(NoiseSuppression::kHigh);
auto cfg = apm->GetConfig();
apm->ApplyConfig(cfg);
The NoiseSuppression instance returned by noise_suppression() has no way to update the config inside APM, so GetConfig() will return an out-of-date config which is then re-applied. This CL adds a proxy that makes this update, by forwarding Enable() and set_level() calls to ApplyConfig().
Drive-by change: AudioProcessing::Config substructs are reordered to mirror the capture processing pipeline.
Tested: Ran ToT and this CL builds of audioproc_f and verified identical settings/aecdumps.
Bug: webrtc:9947
Change-Id: I823eade894be115c254d656562564108b2b63b1f
Reviewed-on: https://webrtc-review.googlesource.com/c/116521
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26248}
Comfort noise was generated by picking random angles on the unit circle
for each frequency band and then obtaining points on the unit circle from
{cos(a), -sin(a)}.
In order to reduce complexity, this change introduces a randomly indexed
table of 32 elements over sin(a). cos(a) is obtained by adding an offset
corresponding to pi/2 to the index. The table is pre-scaled by sqrt(2) to
avoid later multiplications.
This change reduces the computational complexity of AEC3 by ~8% with no
audible degradation.
Bug: webrtc:10189
Change-Id: I8cfe2469022fb1fe910ab3f966e55d9d499b7161
Reviewed-on: https://webrtc-review.googlesource.com/c/116787
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26209}
This CL adds two unit tests to make sure that, when an echo path gain
change occurs, the echo canceller is notified.
Such a change can be caused by (i) a pre-amplifier gain change or
(ii) an analog gain change.
Bug: webrtc:7494
Change-Id: Ia47cfbbc5694340cd3e760d8d3c3393f79897a9d
Reviewed-on: https://webrtc-review.googlesource.com/c/111780
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26190}
This updates some tests to use AudioProcesing::Config() and
AudioProcessing::GetStatistics() instead.
Some tests are left with voice_detection() because
a) not all tests make sense to run both APIs in parallel, and
b) we want test coverage of the old VoiceDetection until it is removed.
Bug: webrtc:9947
Change-Id: Ifb21a1e6e931d7ad3c3a4e38f5cc4f146da3c9a3
Reviewed-on: https://webrtc-review.googlesource.com/c/116160
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26134}
This adds a second (!) VoiceDetection instance in APM, activated via webrtc::AudioProcessing::Config and which reports its values in the webrtc::AudioProcessingStats struct.
The alternative is to reuse the existing instance, but that would require adding a proxy interface returned by AudioProcessing::voice_detection() to update the internal config of AudioProcessingImpl when calling voice_detection()->Enable().
Complexity-wise, no reasonable client will enable both interfaces simultaneously, so the footprint is negligible.
Bug: webrtc:9947
Change-Id: I7d8e28b9bf06abab8f9c6822424bdb9d803b987d
Reviewed-on: https://webrtc-review.googlesource.com/c/115243
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26101}
This CL guards against null pointer dereference, as caught by
clang static analyzer [1].
It also removes a useless field initialization, which happened
to trigger a false positive from said analyser.
[1] https://chromium.googlesource.com/chromium/src/+/HEAD/docs/clang_static_analyzer.md
Bug: webrtc:8793
Bug: webrtc:9855
Change-Id: Ia0fee24395eb2df16b526bbdffa5da6275b0909a
Reviewed-on: https://webrtc-review.googlesource.com/c/115044
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Jeroen de Borst <jeroendb@webrtc.org>
Commit-Queue: Yves Gerey <yvesg@google.com>
Cr-Commit-Position: refs/heads/master@{#26091}
