This CL adds a flag to optionally disable the digital gain control in
ExperimentalAgc. With the flag, Experimental Agc (henceforth AGC1)
only controls the adaptive analog gain. This flag can be combined to
that which activates AGC2. That way, one can enable the hybrid AGC
configuration AGC1 analog only + AGC2 fixed+adaptive digital.
Previously, there was a flag "use_agc2_digital_adaptive" in
AgcManagerDirect. Our ambition was that to activate the hybrid mode
described above with this flag. The behavior of the flag was not
implemented.
To activate the hybrid mode after this CL, set
ExperimentalAgc::digital_adaptive_disabled=true and
AudioProcessing::Config::GainController2::enabled=true.
We also add flags for these settings in audioproc_f.
Then the required settings are currently
audioproc_f --agc2 1 --agc 1 --experimental_agc 1 \
--experimental_agc_disable_digital_adaptive 1 \
-i [INPUT]
Bug: webrtc:7494
Change-Id: Iea798dc3899cec83d30ba71caba787262fcaef41
Reviewed-on: https://webrtc-review.googlesource.com/89740
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24249}
This CL adds two flags to audioproc_f. The flags control
AgcManagerDirect. The flags are
'--experimental_agc_agc2_level_estimator' and
'--experimental_agc_agc2_digital_adaptive'.
After this CL, the flags are be applied to AgcManagerDirect. The flags
have no effect in release-mode. They cause a crash in debug-mode.
In an upcoming CL, '--experimental_agc_agc2_level_estimator 1' will
replace the speech level estimation in ExperimentalAgc with that of
AGC2.
'--experimental_agc_agc2_digital_adaptive 1' will replace the digital
gain selection and application with that of AGC2.
These audioproc_f will activate both new settings:
./out/Target/audioproc_f --agc 1 --experimental_agc 1
--experimental_agc_agc2_digital_adaptive 1
--experimental_agc_agc2_level_estimator 1 --simulate_mic_gain 1
--simulated_mic_kind 2
See also https://webrtc-review.googlesource.com/c/src/+/79360
Bug: webrtc:7494
Change-Id: If0e65893dffdddb312e553787b8cedaf9a334323
Reviewed-on: https://webrtc-review.googlesource.com/86548
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23802}
This removes beamformer references from audioproc_f, some non-beamformer tests, and a few other bits and bobs.
The beamformer is, after this, very decoupled from the remaining APM code.
Bug: webrtc:9402
Change-Id: Iaafc95517013d7a17723ef2329f17b5e09069bc9
Reviewed-on: https://webrtc-review.googlesource.com/83983
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23649}
In this work we introduce some changes on how the reverberation model for AEC3 is applied. Currently, the exponential modelling of the tails is applied over the linear echo estimates. That might result in an overestimation of the reverberation tails under certain conditions. In this work, the reverberation model is instead applied over an estimate of the energies at the tails of the linear estimate.
Additionally, the stationary estimator is changed so it does not disable the aec immediately after a burst of activity.
Bug: webrtc:9384,webrtc:9400,chromium:852257
Change-Id: Ia486694ed326cfe231fc688877c0b9b6e2c450ff
Reviewed-on: https://webrtc-review.googlesource.com/82161
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23599}
In this work, we change the behavior of the gain limiter so it also looks at the energy
on farend around the default delay for deciding the suppression gain
that should be applied at the initial portion of the call.
Bug: webrtc:9311,chromium:846724
Change-Id: I0b777cedbbd7fd689e72070f72237296ce120d3c
Reviewed-on: https://webrtc-review.googlesource.com/78960
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23400}
This CL is created from a work initiated at https://webrtc-review.googlesource.com/c/src/+/61160
The purpose of this work is to improve the performance of the echo canceler (AEC3) when the farend signal contains stationary noises:
- An stationarity estimator of the farend signal has been added for detecting the portions of the farend signal that are pure noise.
- When the echo canceler deals with a portion of the signal that contains basically noise, the echo suppressor is able to back-off and avoid the fading of the nearend speech.
Change-Id: Id4b87fc59f4765bf1fca36d1cab39a49aabe104a
Bug: webrtc:9193,chromium:836790
Reviewed-on: https://webrtc-review.googlesource.com/64141
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23024}
This CL increases the transparency in AEC3 during regions of low level
echo. What is done is:
-Low-level echoes are smoothly weighted so as to be deemed less
disturbing.
-The time-domain masking effect of the nearend speech is increased for
all frequencies.
-A separate, even more increased, time-domain masking effect is
introduced for lower frequencies.
-The intra-band masking is reduced to reduce the risk of echo leakage.
-The limiting of maximum gain due to filter-bank dynamics is removed
as the usecase for it could no longer be identified.
Bug: webrtc:9159,cromium:833801
Change-Id: I289b92919763124d6c5e5ede19e9a5917877c654
Reviewed-on: https://webrtc-review.googlesource.com/70421
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22915}
Add configuration fields for the pre-amplifier in the Audio Processing
Module. Also add flags and settings for the pre-amplifier in
audioproc_f.
Also make the setting stored in Aec Dumps. And make the setting
applied when playing back Aec Dumps in audioproc_f.
Bug: webrtc:9138
Change-Id: I4e59df200e1ebc56f06fae74ebf17d85858958a3
Reviewed-on: https://webrtc-review.googlesource.com/69560
Reviewed-by: Oleh Prypin <oprypin@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22876}
This CL corrects some errors that were included in the CL for reading
the AEC3 options in the audioproc_f tool
Bug: webrtc:8671
Change-Id: Iecaee0ebf08f8a8f75aba1d395dd467a41b876f3
Reviewed-on: https://webrtc-review.googlesource.com/60870
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22384}
This refactoring makes it easier to experiment with injectable components.
Bug: webrtc:8732
Change-Id: I2cd2a8ff80516a76aec814af02b61778915f2217
Reviewed-on: https://webrtc-review.googlesource.com/60863
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22372}
This is a reland of 6f37ed78d9
CQ dry run OK except for missing iOS swarming bots.
NOTRY=True
Original change's description:
> Deprecate the adaptive level controller
>
> Level control handled by default-on AGC.
>
> Bug: none
> Change-Id: I405daeceece12c896d41156b649fcfd556726f77
> Reviewed-on: https://webrtc-review.googlesource.com/59682
> Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
> Reviewed-by: Alex Loiko <aleloi@webrtc.org>
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#22305}
Bug: none
Change-Id: I0b9b8e2f3457d5efd4603efbfbbc6b84651df315
Reviewed-on: https://webrtc-review.googlesource.com/60720
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22352}
This CL extends the options for the audioproc_f tool to match the options
for AEC3.
Bug: webrtc:8671
Change-Id: I39972eae33dba461b94118ec47a8560eb9cfe5a6
Reviewed-on: https://webrtc-review.googlesource.com/43120
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22344}
The AEC3 factory is now part of the WebRTC API.
Bug: webrtc:8844
Change-Id: If6f419b4ca0354e2d346c0e6474086e456ba747e
Reviewed-on: https://webrtc-review.googlesource.com/57141
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22204}
The AudioProcessingBuilder was recently introduced in https://webrtc-review.googlesource.com/c/src/+/34651 to make it easier to create APM instances. This CL replaces all calls to the old Create methods with the new AudioProcessingBuilder.
Bug: webrtc:8668
Change-Id: Ibb5f0fc0dbcc85fcf3355b01bec916f20fe0eb67
Reviewed-on: https://webrtc-review.googlesource.com/36082
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21534}
This CL adds a way to insert a custom render-side pre-processor to
APM. The pre-processor operates in full-band mode before anything
else. Currently the render processing chain is (if everything is
enabled):
Network --> [Pre processing] --> [Band split] -->
[IntelligibilityEnhancer] --> [Echo canceller (read-only)] -->
[Band merge] --> Playout
Since the render pre processor and capture post processor have the
same interface, I renamed webrtc::PostProcessing into
webrtc::CustomProcessing.
The old APM factory method PostProcessing will be deprecated and
dependencies updated as part of webrtc:8665
NOTRY=True
Bug: webrtc:8665
Change-Id: Ia381cbf12e336d6587406a14d77243d931f69a31
Reviewed-on: https://webrtc-review.googlesource.com/29201
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21327}
This is a minor change to generated Python code used for testing the echo likelihood metric.
Bug: webrtc:8573
Change-Id: Ifb2438fdd36c3ade8cd830df0d05917af0f77dec
Reviewed-on: https://webrtc-review.googlesource.com/26281
Commit-Queue: Daniel Johansson <dajo@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20939}
The struct containing the config for AEC3 is removed from
AudioProcessing::Config and is put in a new struct called
EchoCanceller3Config.
AEC3 should no longer be activated through
AudioProcessing::ApplyConfig. Instead an EchoCanceller3Factory
can be injected at AudioProcessing creation.
Bug: webrtc:8346
Change-Id: I27e3592e675eec3632a60c45d9e0d12514c2c567
Reviewed-on: https://webrtc-review.googlesource.com/11420
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20342}
In preparation of coming CLs that will add an AGC interface to make the
gain controller injectable.
This CL simplifies AGC2 (dummy sub-module of audioproc_f) since it only
implements the fixed digital mode with hard-clipping - i.e., no limiter
is used.
The AGC2 config now includes the fixed gain to apply and audioproc_f
has been adapted accordingly.
Finally, this CL slightly simplifies the AGC2 integration into APM.
This CL is a continuation of https://codereview.webrtc.org/2995043002/
Bug: webrtc:7494
Change-Id: I3d554ea4dc6208928352059feb14987edabf14c7
Reviewed-on: https://webrtc-review.googlesource.com/4661
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20278}
The gain suggested by AGC is optionally used in audioproc_f to simulate analog gain applied to the mic.
The simulation is done by applying digital gain to the input samples.
This functionality is optional and disabled by default. If an AECdump is provided and the mic gain simulation is enabled, an extra "level undo" step is performed to virtually restore the unmodified mic signal.
This CL has been ported from https://codereview.webrtc.org/2834643002/.
Bug: webrtc:7494
Change-Id: I0df52b5d45a6bfa1efced980d8d6de5c5d9bed48
Reviewed-on: https://webrtc-review.googlesource.com/2685
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19992}
In https://webrtc-review.googlesource.com/c/src/+/1560 we moved WebRTC
from src/webrtc to src/ (in order to preserve an healthy git history).
This CL takes care of fixing header guards, #include paths, etc...
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iea91618212bee0af16aa3f05071eab8f93706578
Reviewed-on: https://webrtc-review.googlesource.com/1561
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19846}
In order to eliminate the WebRTC Subtree mirror in Chromium,
WebRTC is moving the content of the src/webrtc directory up
to the src/ directory.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iac59c5b51b950f174119565bac87955a7994bc38
Reviewed-on: https://webrtc-review.googlesource.com/1560
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19845}
2017-09-15 04:25:06 +00:00
Renamed from webrtc/modules/audio_processing/test/audio_processing_simulator.cc (Browse further)
