enable this opt can give 20% performance improvement for video
decoding with 720P video loopback and fake camera on chromebook sarien.
Bug: None
Test: ./modules_tests on chromebook sarien
Change-Id: I8c6487b291b5861e6ba6b6d55b24d7ddb51c341e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/177335
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31543}
This is a reland of d592575698
Patchset 2 is a reland of
https://webrtc-review.googlesource.com/c/src/+/177012
Patchset 3 is a fix for a potential crash when InitDecode()is called from
VideoStreamDecoderImpl::GetDecoder(), where the decoder_settings
parameter is a but surprisingly set to nullptr.
Original change's description:
> VP9 decoder: Sets thread count based on resolution, reinit on change.
>
> Previously, number of decoder threads for VP9 were always set to 8 but
> with a cap at number of cores. This was done since we "can't know" the
> resolution that will be used.
>
> With this change, we now intialize the number of threads based on
> resolution given in InitDecode(). If a resolution change happens in
> flight, it requires a keyframe. We therefore parse the header from
> any key frame and if it has a new resolution, we re-initialize the
> decoder.
>
> The number of threads used is based on pixel count. We set one thread
> as target for 1280x720, and scale up lineraly from there. The 8-thread
> cap is gone, but still limit it core count.
>
> This means for instance: 1 <= 720p, 2 for 1080p, 4 for 1440p, 9 for 4K.
>
> Bug: webrtc:11551
> Change-Id: I14c169a6c651c50bd1b870c4b22bc4495c8448fd
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/174460
> Commit-Queue: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#31507}
Bug: webrtc:11551
Change-Id: I2b4b146d0b8319f07ce1660202d6aa4b374eb015
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/177246
Reviewed-by: Johannes Kron <kron@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31527}
This reverts commit d592575698.
Reason for revert: May cause crashes.
Original change's description:
> VP9 decoder: Sets thread count based on resolution, reinit on change.
>
> Previously, number of decoder threads for VP9 were always set to 8 but
> with a cap at number of cores. This was done since we "can't know" the
> resolution that will be used.
>
> With this change, we now intialize the number of threads based on
> resolution given in InitDecode(). If a resolution change happens in
> flight, it requires a keyframe. We therefore parse the header from
> any key frame and if it has a new resolution, we re-initialize the
> decoder.
>
> The number of threads used is based on pixel count. We set one thread
> as target for 1280x720, and scale up lineraly from there. The 8-thread
> cap is gone, but still limit it core count.
>
> This means for instance: 1 <= 720p, 2 for 1080p, 4 for 1440p, 9 for 4K.
>
> Bug: webrtc:11551
> Change-Id: I14c169a6c651c50bd1b870c4b22bc4495c8448fd
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/174460
> Commit-Queue: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#31507}
TBR=ilnik@webrtc.org,sprang@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:11551
Change-Id: Id235c8ded83b3e1fc1d132c8f56c9f20001f6f22
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/177242
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31521}
This reverts commit 26e5046951.
Reason for revert: Part of change that may cause crashes.
Original change's description:
> Adjusts allowable thread count for vp9 decoders.
>
> Set 2 thread as target for 1280x720 pixel count, and then scale up
> linearly from there - but cap at physical core count.
> For common resolutions this results in:
> 1 for 360p
> 2 for 720p
> 4 for 1080p
> 8 for 1440p
> 18 for 4K
>
> Bug: webrtc:11551
> Change-Id: I666bd971eccddee096749f20d3b08eb40fe868ad
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/177012
> Reviewed-by: Johannes Kron <kron@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#31513}
TBR=sprang@webrtc.org,kron@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:11551
Change-Id: I4ea5166efeed3d55255a0243a69deb584a0e19e2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/177240
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31517}
Set 2 thread as target for 1280x720 pixel count, and then scale up
linearly from there - but cap at physical core count.
For common resolutions this results in:
1 for 360p
2 for 720p
4 for 1080p
8 for 1440p
18 for 4K
Bug: webrtc:11551
Change-Id: I666bd971eccddee096749f20d3b08eb40fe868ad
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/177012
Reviewed-by: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31513}
Previously, number of decoder threads for VP9 were always set to 8 but
with a cap at number of cores. This was done since we "can't know" the
resolution that will be used.
With this change, we now intialize the number of threads based on
resolution given in InitDecode(). If a resolution change happens in
flight, it requires a keyframe. We therefore parse the header from
any key frame and if it has a new resolution, we re-initialize the
decoder.
The number of threads used is based on pixel count. We set one thread
as target for 1280x720, and scale up lineraly from there. The 8-thread
cap is gone, but still limit it core count.
This means for instance: 1 <= 720p, 2 for 1080p, 4 for 1440p, 9 for 4K.
Bug: webrtc:11551
Change-Id: I14c169a6c651c50bd1b870c4b22bc4495c8448fd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/174460
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#31507}
This CL fixes a few issues where the reported fraction of frames
allocated to various temporal layers could be incorrect:
* In LibvpxVp8Encoder, calling GetEncoderInfo() while not initialized,
or when first configuring with temporal layers and then without,
could trigger incorrect fps allocations.
* In VP9 when different spatial layers have different max framerates,
the layer fps should be compared to the layer with the highest
configured fps, not codec_.maxFramerate which is updated to the
current input fps on SetRates().
* In EncoderBitrateAdjuster, just warn and ignore if a layer has
non-zero bps but zero fps, rather than passing down the chain and
risk weird behavior or divide by zero.
Bug: b/152040235
Change-Id: I548fb3e099b1ec9f536a7b93313fb40c4d32e596
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/171516
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30880}
~3-5% speed up on webrtc_perf_tests of vp9 on linux desktop.
Avoid going thru a lot of unnecessary code checks.
Change-Id: I2cb0d794bcf239c5057dfc04cd07a496f89a5016
Bug: None
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167640
Commit-Queue: Jerome Jiang <jianj@google.com>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30586}
This CL uses |width| and |height| in RTPVideoHeaderVP9 to pass information
about enabled layers from encoder to packetizer.
Bug: webrtc:11319
Change-Id: Idc1c337f8dfb3f7631506acb784d2a634b41b955
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/167724
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30428}
Chromting is trying vp9 444 to have better color. This fix is needed to decode 444 properly.
Bug: webrtc:11326
Change-Id: I4498930591d8876af9f6b7238a8c9fe450ecbfcc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/166220
Commit-Queue: Jerome Jiang <jianj@google.com>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30410}
This CL was generated by running:
git ls-files | grep ".cc" | xargs perl -i -ne 'BEGIN {undef $/}; s/("[\s\n]*<<[\s\n]*")/" "/g; print;'; git cl format
After that I manually edited modules/audio_processing/gain_controller2.cc to preserve its original
formatting.
This primary benefit of this change is a small reduction in binary size.
Bug: None
Change-Id: I689fa7ba9c717c314bb167e5d592c3c4e0871e29
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165961
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Jonas Olsson <jonasolsson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30251}
Now vp9 screenshare would enable new layers as soon as requested and will force all spatial layers present on the next frame, even if they should be dropped because of frame-rate limiting.
This might cause frame-rate liming to be exceeded if layer is toggling on and off very often, but this situation is bad itself. E.g. in realtime video it will cause too many key-frames.
Now SvcRateAllocator and VP9EncoderImpl are aware that there may be some skipped layers before the first enabled. Key-frames and ss_info triggering logic is also updated.
(This is a reland without changes after updates to downstream projects)
Original-Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153483
Bug: webrtc:10977
Change-Id: I02459c5982da2e0542a837514f5753c5f96401c6
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/154355
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29330}
This reverts commit 88fe84b7fb.
Reason for revert: Downstream project isn't updated to the latest libvpx roll yet, thus some tests are broken.
Original change's description:
> VP9 encoder: handle disabled layers correctly
>
> Now vp9 screenshare would enable new layers as soon as requested and will
> force all spatial layers present on the next frame, even if they should be
> dropped because of frame-rate limiting.
>
> This might cause frame-rate liming to be exceeded if layer is toggling on
> and off very often, but this situation is bad itself. E.g. in realtime video
> it will cause too many key-frames.
>
> Now SvcRateAllocator and VP9EncoderImpl are aware that there may be some skipped
> layers before the first enabled. Key-frames and ss_info triggering logic is also
> updated.
>
> Bug: webrtc:10977
> Change-Id: Ie2555210c0368a1d3c51ddf6670d0052e6d679de
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153483
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29296}
TBR=ilnik@webrtc.org,ssilkin@webrtc.org
Change-Id: If33886a5f8a0c3b33168dcadfe45c11a6f4387c1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10977
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/154354
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29299}
Now vp9 screenshare would enable new layers as soon as requested and will
force all spatial layers present on the next frame, even if they should be
dropped because of frame-rate limiting.
This might cause frame-rate liming to be exceeded if layer is toggling on
and off very often, but this situation is bad itself. E.g. in realtime video
it will cause too many key-frames.
Now SvcRateAllocator and VP9EncoderImpl are aware that there may be some skipped
layers before the first enabled. Key-frames and ss_info triggering logic is also
updated.
Bug: webrtc:10977
Change-Id: Ie2555210c0368a1d3c51ddf6670d0052e6d679de
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153483
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29296}
This mode was added by libvpx team specificaly for this usecase: if a
layer is dropped, all lower layers have to be dropped also.
This ensures that higher layers always have higher framerate than the
lower layers and stream is RTP compatible.
This CL also renames full_superframe_drop_ to !layer_buffering, as it
closer reflects the purpose of that flag (in screenshare mode, no
buffering is needed, because the highest layer is always present in the
superframe, yet, it's not a full-superframe dropping mode).
Bug: webrtc:10257
Change-Id: I2589bfd2b9b63de0e410f277a716276234993843
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151764
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29155}
if higher layer is enabled, then disabled, then key-frame is issued, then
the layer is enabled again, the buffer would contain a picture from before
the key-frame and it might have a higher pid than the currently encoded one.
This would trigger the DCHECK. It's safe to remove the DCHECK completely, because
such occasions would cause unsigned overflow and cause the following check for
maximum allowed picture difference to fail and the wrong picture won't
be used as a temporal reference.
This error only caused failures in debug builds and couldn't lead to corruptions
because there're periodical key-frames generated and pid difference can never become so
big that negative value would overflow to something close to 0.
Bug: webrtc:10257
Change-Id: Ie3b3ed0e24421787e3b40a37987ccecb75d04635
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151643
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29099}
We want to evaluate more data in order to make better choices in the
bitrate allocators.
In order to freely update the parameter list without
breaking the API many times for projects customizing them, we'll use a
struct instead.
Bug: webrtc:10126
Change-Id: I443f86781c5134950294cdd1e3197a47447cf973
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/141418
Commit-Queue: Florent Castelli <orphis@webrtc.org>
Reviewed-by: Tommi <tommi@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28748}
This partially reverts these 2 CLs:
1) Reland "Copy video frames metadata between encoded and plain frames in one place"
https://webrtc.googlesource.com/src/+/2ebf5239782bf6b46d4aa812f34fa9f9e5a02be9
2) Don't copy video frame metadata in each encoder/decoder
https://webrtc.googlesource.com/src/+/ab62b2ee51e622be6d0aade15e87e927fa60e6f2
The problem with them were that ColorSpace was made to always be copied from the
EncodedImage in the GenericDecoder, which overwrote ColorSpace information from
the decoder.
If decoder applied color space transition or bitstream color space information
was different from the WebRTC signaled one, the incorrect color space data were
passed to the renderer.
This CL removes introduced change regarding color space data: GenericDecoder
doesn't copy or store it and software decoders are restored to copy it.
Relevant tests are also removed.
Bug: chromium:982486
Change-Id: I989e01476ff7f7df376c05578ab8f540b95a1dd2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/145323
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28556}
- Don't reset encoder if max/min bitrate changed.
- Removed min/max bitrate DCHECKs from encoder wrappers.
- Reset encoder if start_bitrate changed. Only do this if encoding
has not yet started.
- Updated ReconfigureBitratesSetsEncoderBitratesCorrectly test.
- Removed EncoderSetupPropagatesCommonEncoderConfigValues test since it
was a subset of ReconfigureBitratesSetsEncoderBitratesCorrectly.
Bug: webrtc:10773
Change-Id: Id9cbb2ea229232fd95967819e2a937b26948de9f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/144028
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28446}
The purpose of this interface is to allow VideoEncoder to override
the bandwidth allocation set by FecController in RtpVideoSender.
This CL defines the interface and sends it down to VideoSender.
Two upcoming CLs will:
1. Make LibvpxVp8Encoder pass it on to the (injectable)
FrameBufferController, where it might be put to good use.
2. Modify RtpVideoSender to respond to the message sent to it
via this API.
TBR=kwiberg@webrtc.org
Bug: webrtc:10769
Change-Id: I2ef82f0ddcde7fd078e32d8aabf6efe43e0f7f8a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/143962
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28416}
This is a reland of 11dfff0878
Now that I am sure that WebRTC code is not calling the obsolete
versions, I will just remove the NOT_REACHED and call the
new version from the old ones, so as not to trip up downstream
projects.
Original change's description:
> Inform VideoEncoder of negotiated capabilities
>
> After this CL lands, an announcement will be made to
> discuss-webrtc about the deprecation of one version
> of InitEncode().
>
> Bug: webrtc:10720
> Change-Id: Ib992af0272bbb16ae16ef7e69491f365702d179e
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/140884
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Commit-Queue: Elad Alon <eladalon@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28224}
TBR=sakal@webrtc.org,kwiberg@webrtc.org,sprang@webrtc.org
Bug: webrtc:10720
Change-Id: I46c69e45c190805c07f7e51acbe277d7eebd1600
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/141412
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Reviewed-by: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28236}
This reverts commit 11dfff0878.
Reason for revert: Downstream import failure.
Original change's description:
> Inform VideoEncoder of negotiated capabilities
>
> After this CL lands, an announcement will be made to
> discuss-webrtc about the deprecation of one version
> of InitEncode().
>
> Bug: webrtc:10720
> Change-Id: Ib992af0272bbb16ae16ef7e69491f365702d179e
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/140884
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Commit-Queue: Elad Alon <eladalon@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28224}
TBR=sakal@webrtc.org,kwiberg@webrtc.org,eladalon@webrtc.org,kthelgason@webrtc.org,sprang@webrtc.org
Change-Id: I7f833055c67f1f879b01dd8c156ba7b8840e8747
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10720
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/141411
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28225}
After this CL lands, an announcement will be made to
discuss-webrtc about the deprecation of one version
of InitEncode().
Bug: webrtc:10720
Change-Id: Ib992af0272bbb16ae16ef7e69491f365702d179e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/140884
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28224}
As this is handled higher up the pipeline in a single
place for all encoders/decoders
Bug: webrtc:10460
Change-Id: I95b0a69aecaf07283c8776ac0d7e85d097e3576b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/139882
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28172}
Because of a low bitrate target, base layer has drops much more frequently
than other layers. But it reduces overall framerate, especially then
input framerate is low (5 fps).
This CL allows pre-layer drops and disables droppoing on higher spatial
layers for screenshare, solving the issue.
Additional care have to be taken then new spatial layers are enabled
dynamically to not create non-compatible with RTP references.
Bug: webrtc:10257
Change-Id: Ie056484c99a3f35ff4405ef71337dc2d034db8bb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/138262
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28063}
Reland with fixes.
If input framerate is a little unstable, using it to cap layers will
make output framerate even smaller for longer periods of time.
Also, fix screenshare_loopback test for low-fps vp9 testing.
Bug: webrtc:10257
Change-Id: Id40a780d461e6b51cb44d275b8aa5d7b348d3586
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/138215
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28054}
This reverts commit eb1754c575.
Reason for revert: breaks downstream projects
Original change's description:
> VP9 screenshare: Don't base layers frame-rate on input frame-rate
>
> If input framerate is a little unstable, using it to cap layers will
> make output framerate even smaller for longer periods of time.
>
> Also, fix screenshare_loopback test for low-fps vp9 testing.
>
> Bug: webrtc:10257
> Change-Id: I64aa087e859ab4ab8e484c9ab7f5ac0fb18bd37d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/138204
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28050}
TBR=ilnik@webrtc.org,ssilkin@webrtc.org
Change-Id: I82bfbac58249cfe0da5ff565aa97a4745fd078ff
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10257
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/138213
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28051}
If input framerate is a little unstable, using it to cap layers will
make output framerate even smaller for longer periods of time.
Also, fix screenshare_loopback test for low-fps vp9 testing.
Bug: webrtc:10257
Change-Id: I64aa087e859ab4ab8e484c9ab7f5ac0fb18bd37d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/138204
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28050}
This reverts commit 00d0a0a1a9.
Reason for revert: Breaks downstream tests
Original change's description:
> Copy video frames metadata between encoded and plain frames in one place
>
> Currently some video frames metadata like rotation or ntp timestamps are
> copied in every encoder and decoder separately. This CL makes copying to
> happen at a single place for send or receive side. This will make it
> easier to add new metadata in the future.
>
> Also, added some missing tests.
>
> Bug: webrtc:10460
> Change-Id: Ia49072c3041e75433f125a61050d2982b2bec1da
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133346
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Johannes Kron <kron@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27719}
TBR=ilnik@webrtc.org,sprang@webrtc.org,kron@webrtc.org
Change-Id: I8960a6cc15e552925129ba0037f197ff3fd93c25
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10460
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134100
Reviewed-by: Artem Titarenko <artit@webrtc.org>
Commit-Queue: Artem Titarenko <artit@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27737}
Currently some video frames metadata like rotation or ntp timestamps are
copied in every encoder and decoder separately. This CL makes copying to
happen at a single place for send or receive side. This will make it
easier to add new metadata in the future.
Also, added some missing tests.
Bug: webrtc:10460
Change-Id: Ia49072c3041e75433f125a61050d2982b2bec1da
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133346
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Johannes Kron <kron@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27719}
