This CL changes the GetStatistics call in the audio processing module
(APM) to not aquire the render or capture locks in APM, while still
being thread-safe.
This change eliminates the risk of thread-priority inversion due to the
GetStatistics call.
Apart from the above the CL:
-Corrects the GetStatistics to not be const (it was const even though it
aquired locks).
-Slightly changes the statistics reporting, so that the stats received
may be older than the most recent stats reported.
Bug: webrtc:11241
Change-Id: I00deb5507e004cbe6e4a19a8bad357491f86f4ab
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/163982
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30131}
This CL enables extracting the linear AEC output,
allowing for more straightforward
testing/development.
Bug: b/140823178
Change-Id: I14f7934008d87066b35500466cb6e6d96f811688
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153672
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29789}
Adding a version of AnalyzeReverseStream with audio parameters
described by StreamConfig. This is part of preparations for
multichannel APM in Chromium.
Bug: webrtc:10913
Change-Id: I7c4650eab8bd7fcdec970a7e4a8fa203f09bed9e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/157897
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29573}
The new configuration path is via AudioProcessing::ApplyConfig and
AudioProcessing::GetStatistics.
Bug: webrtc:9878
Change-Id: Ic912d67455fcef4895566edb8fef62baf62d7cfe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/156440
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29454}
This change keeps the original 48 kHz signal and uses it for the
fullband processing given that the following requirements are
fulfilled:
- Input signal is 48 kHz
- Output signal is 48 kHz
- Multiband processing is performed at 32 kHz
- The multiband processing does not modify the original signal
This avoids unnecessary, lossy resampling and band merging.
Bug: b/130016532
Change-Id: I690c26faba07eab0cbff6c0a95a81d89255dd1a1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155966
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29425}
The new configuration path is via AudioProcessing::ApplyConfig and
AudioProcessing::GetStatistics.
ApmTest.Process passes with unchanged reference files if
audio_processing_impl would initialize the VAD with
VoiceDetection::kLowLikelihood instead of kVeryLowLikelihood.
This was verified by testing this CL with that modification.
Bug: webrtc:9878
Change-Id: I4d08df37a07e5c72feeec02a07d6b9435f917d72
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155445
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29395}
This CL removes and replaces the legacy fixed-point high-pass filter in
APM with the floating point high-pass filter in AEC3.
Bug: webrtc:10907
Change-Id: I88cf8f622ab139e4ffa97f89a72425aa3becfc58
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150103
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28950}
Semi-automatically created with:
git grep -l " testing::" | xargs sed -i "s/ testing::/ ::testing::/g"
git grep -l "(testing::" | xargs sed -i "s/(testing::/(::testing::/g"
git cl format
After this, two .cc files failed to compile and I have fixed them
manually.
Bug: webrtc:10523
Change-Id: I4741d3bcedc831b6c5fdc04485678617eb4ce031
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132018
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27526}
The pointer-to-submodule interfaces are being removed.
This CL:
1) introduces AudioProcessing::Config::GainController1 with most config,
2) adds functions to APM for setting and getting analog gain,
3) creates a temporary GainControlConfigProxy to support the transition
to the new config.
4) Moves the lock references in GainControlForExperimentalAgc and
GainControlImpl into the GainControlConfigProxy, as it becomes the
sole AGC object with functionality exposed to the client.
Bug: webrtc:9947, webrtc:9878
Change-Id: Ic31e15e9bb26d6497a92b77874e0b6cab21ff2b2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126485
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27316}
Additionally, AudioProcessing::GetStatistics(bool) is made pure
virtual and the default implementation in AudioProcessing is removed.
Deprecation PSA:
https://groups.google.com/forum/#!msg/discuss-webrtc/NgqEPvkNuDE/7HtwnMmADgAJ
Bug: webrtc:9947, webrtc:8572
Change-Id: I123402bf7d6c49f3613154c469b818109d8fad43
Reviewed-on: https://webrtc-review.googlesource.com/c/108783
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25463}
CustomAudioAnalyzer is an interface of a component into APM that
reads AudioBuffer without changing it.
The APM sub-module is optional. It operates in full band.
As described in the comments, it is an experimental interface which
may be changed in the nearest future.
Change-Id: I21edf729d97947529256407b10fa4b5219bb2bf5
Bug: webrtc:9678
Reviewed-on: https://webrtc-review.googlesource.com/96560
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Valeriia Nemychnikova <valeriian@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24481}
Running clang-format with chromium's style guide.
The goal is n-fold:
* providing consistency and readability (that's what code guidelines are for)
* preventing noise with presubmit checks and git cl format
* building on the previous point: making it easier to automatically fix format issues
* you name it
Please consider using git-hyper-blame to ignore this commit.
Bug: webrtc:9340
Change-Id: I694567c4cdf8cee2860958cfe82bfaf25848bb87
Reviewed-on: https://webrtc-review.googlesource.com/81185
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23660}
CustomProcessing is the interface to injectable audio processing
submodules to AudioProcessing. This CL makes it possible to set
runtime settings on the injected render processing component.
Note that the current runtime setting handling happens on the capture
thread. Therefore, we add another SwapQueue to communicate with the
render thread.
Bug: webrtc:9138, webrtc:9262
Change-Id: I665ce2d83a2b35ca8b25cca813d2cef7bd0ba911
Reviewed-on: https://webrtc-review.googlesource.com/76123
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23236}
This CL adds support for using any externally reported audio buffer
delay to set the initial alignment in AEC3 which is used before the
AEC has been able to detect the delay.
Bug: chromium:834182,webrtc:9163
Change-Id: Ic71355f69b7c4d5815b78e49987043441e7908fb
Reviewed-on: https://webrtc-review.googlesource.com/70580
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22917}
This CL includes the following changes:
- APM runtime setting (ID + float payload) and unit tests
- Swap queue of APM runtime settings used in AudioProcessingImpl
- runtime settings handler that forwards the settings to APM
sub-modules when a message is retrieved from the queue
- Unit test placeholder to check that the pre-gain update message
is correctly delivered
Bug: webrtc:9138
Change-Id: Id22704af15fde2b87a4431f5ce64ad1aeafc5280
Reviewed-on: https://webrtc-review.googlesource.com/69320
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22873}
This provides the empty shell of an AudioGenerator class.
It is intended to be used for debugging purposes and can be inserted
into the APM much like an AecDump. It allows for playing out diagnostic
audio unaffected by codecs and network jitter, while still capturing
API interaction like in a normal call.
NOTRY=True
Bug: webrtc:8882
Change-Id: I8132afc95cdba02ab233f44e22e0a5f530710ef7
Reviewed-on: https://webrtc-review.googlesource.com/53300
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22282}
The unit tests for AudioSendStream was generating a lot of warnings
about "Uninteresting mock function call" on mocked objects. This is due
to the default gmock implementation being NaggyMock and there was no
NiceMock override.
With this change the mocks are replaced with NiceMock implementations
which do not output warnings for unexpected calls. This makes the error
output from the test runner much easier to visually parse to find the
actual errors in failing tests.
Bug: None
Change-Id: Ic40db78159536ddeaa72a468fc2cb3ec17386d44
Reviewed-on: https://webrtc-review.googlesource.com/56220
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22152}
This CL adds a way to insert a custom render-side pre-processor to
APM. The pre-processor operates in full-band mode before anything
else. Currently the render processing chain is (if everything is
enabled):
Network --> [Pre processing] --> [Band split] -->
[IntelligibilityEnhancer] --> [Echo canceller (read-only)] -->
[Band merge] --> Playout
Since the render pre processor and capture post processor have the
same interface, I renamed webrtc::PostProcessing into
webrtc::CustomProcessing.
The old APM factory method PostProcessing will be deprecated and
dependencies updated as part of webrtc:8665
NOTRY=True
Bug: webrtc:8665
Change-Id: Ia381cbf12e336d6587406a14d77243d931f69a31
Reviewed-on: https://webrtc-review.googlesource.com/29201
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21327}
The new interface uses optionals instead of default values, and only values that are actually used are included. To make it easy to add/remove stats in the future, the struct itself is copied around on all layers, instead of copying the values one by one. This CL also fixes a bug which caused several APM statistics to get stuck at a fixed level when there are no more receive streams (after some period where there were receive streams). Since APM doesn't know this happens, an argument was added to the GetStats call to pass this information down to APM.
Bug: webrtc:8563, b/67926135
Change-Id: I96cc008353355bb520c4523f5c5379860f73ee24
Reviewed-on: https://webrtc-review.googlesource.com/25621
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20877}
The audio processing module reports the metrics 'echo return loss'
and 'echo return loss enhancement' for AEC3.
Bug: webrtc:8533
Change-Id: I166c504adf013d6cb5d6d3c9717d0622c3454bb7
Reviewed-on: https://webrtc-review.googlesource.com/24880
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20835}
The factory for EchoControl is changed from an rtc::Callback1 to an
interface. This avoids using rtc::Callback1 outside of WebRTC.
This also makes the EchoControl factory more similar to other
factories in the code base.
Bug: webrtc:8345
Change-Id: Ie61b9416ed771f8c756326736d17e339eb768469
Reviewed-on: https://webrtc-review.googlesource.com/8900
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20272}
This CL adds an interface for a generic PostProcessing module that
is optionally added to the APM at construction time.
(Parenthetically this CL also adds a missing lock check to
InitializeGainController2.)
Bug: webrtc:8201
Change-Id: I7de64cf8d5335ecec450da8a961660906141d42a
Reviewed-on: https://webrtc-review.googlesource.com/1570
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19973}
In https://webrtc-review.googlesource.com/c/src/+/1560 we moved WebRTC
from src/webrtc to src/ (in order to preserve an healthy git history).
This CL takes care of fixing header guards, #include paths, etc...
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iea91618212bee0af16aa3f05071eab8f93706578
Reviewed-on: https://webrtc-review.googlesource.com/1561
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19846}
In order to eliminate the WebRTC Subtree mirror in Chromium,
WebRTC is moving the content of the src/webrtc directory up
to the src/ directory.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iac59c5b51b950f174119565bac87955a7994bc38
Reviewed-on: https://webrtc-review.googlesource.com/1560
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19845}
2017-09-15 04:25:06 +00:00
Renamed from webrtc/modules/audio_processing/include/mock_audio_processing.h (Browse further)
