CustomAudioAnalyzer is an interface of a component into APM that
reads AudioBuffer without changing it.
The APM sub-module is optional. It operates in full band.
As described in the comments, it is an experimental interface which
may be changed in the nearest future.
Change-Id: I21edf729d97947529256407b10fa4b5219bb2bf5
Bug: webrtc:9678
Reviewed-on: https://webrtc-review.googlesource.com/96560
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Valeriia Nemychnikova <valeriian@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24481}
The AGC2 is enabled by flipping
AudioProcessing::Config::GainController2::enabled. The flag enables
both AdaptiveAgc and FixedGainController. Before this CL, there was no
way(*) to only enable the FixedGainController. After this CL, it's
also possible to flip the setting
|AudioProcessing::Config::GainController2::adaptive_digital_mode|. The
default is |true|, which is the previous behavior.
* Except for instantiating and setting it up outside of the APM like
it's done in the AudioMixer.
Bug: webrtc:7494
Change-Id: I506e93b6687221ac467f083fa8db3d45c98c1b83
Reviewed-on: https://webrtc-review.googlesource.com/95426
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24432}
This will be hooked up in clients who need to keep using the moderate
suppression level in AEC2 until other tuning options are available.
Bug: webrtc:9535
Change-Id: I6c40898954d9c856f58bcea87271f4b98fa124de
Reviewed-on: https://webrtc-review.googlesource.com/94148
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24292}
This CL adds a flag to optionally disable the digital gain control in
ExperimentalAgc. With the flag, Experimental Agc (henceforth AGC1)
only controls the adaptive analog gain. This flag can be combined to
that which activates AGC2. That way, one can enable the hybrid AGC
configuration AGC1 analog only + AGC2 fixed+adaptive digital.
Previously, there was a flag "use_agc2_digital_adaptive" in
AgcManagerDirect. Our ambition was that to activate the hybrid mode
described above with this flag. The behavior of the flag was not
implemented.
To activate the hybrid mode after this CL, set
ExperimentalAgc::digital_adaptive_disabled=true and
AudioProcessing::Config::GainController2::enabled=true.
We also add flags for these settings in audioproc_f.
Then the required settings are currently
audioproc_f --agc2 1 --agc 1 --experimental_agc 1 \
--experimental_agc_disable_digital_adaptive 1 \
-i [INPUT]
Bug: webrtc:7494
Change-Id: Iea798dc3899cec83d30ba71caba787262fcaef41
Reviewed-on: https://webrtc-review.googlesource.com/89740
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24249}
Related bug closed since half a year back.
Bug: webrtc:8665
Change-Id: I77007caaa97b5db04f5cf144323cac7a576a7fde
Reviewed-on: https://webrtc-review.googlesource.com/90872
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24135}
This will be the one way of toggling AEC. The EchoControlMobile and
EchoCancellation interfaces will be removed.
The settings introduced here are not used yet, to allow for smooth
downstream fixes.
Bug: webrtc:9535
Change-Id: I3b1a524a0ab7daf63419d7e5ed47417b9282dbf6
Reviewed-on: https://webrtc-review.googlesource.com/90864
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24129}
This reverts commit 771b50ca0b.
Reason for revert: Introduces error-prone config.
Original change's description:
> Add one-stop-shop for built-in AEC toggling in APM
>
> This does not change what AEC functionality is available.
> However, a client that only uses this interface - and not the submodule
> pointer accessors - gets simpler code, and is guaranteed not to run any
> two AECs in tandem.
>
> The submodule interface EchoControlMobile is being deprecated in
> https://webrtc-review.googlesource.com/c/src/+/89392
>
> Bug: webrtc:9535
> Change-Id: Id9326074e566be6d8768010fc421c457beff402c
> Reviewed-on: https://webrtc-review.googlesource.com/89386
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24066}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: I43283a1b22538a4caa77313499989146b2ce67f1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9535
Reviewed-on: https://webrtc-review.googlesource.com/90060
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24067}
This does not change what AEC functionality is available.
However, a client that only uses this interface - and not the submodule
pointer accessors - gets simpler code, and is guaranteed not to run any
two AECs in tandem.
The submodule interface EchoControlMobile is being deprecated in
https://webrtc-review.googlesource.com/c/src/+/89392
Bug: webrtc:9535
Change-Id: Id9326074e566be6d8768010fc421c457beff402c
Reviewed-on: https://webrtc-review.googlesource.com/89386
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24066}
Splits 'modules/audio_processing:audio_processing' target. The files
in modules/audio_processing/agc now are in targets in that folder.
Reason for doing this was to include
modules/audio_processing/agc/agc.h from another target in the
dependent CL https://webrtc-review.googlesource.com/c/src/+/86603
This could help reducing the binary size in the future.
Bug: webrtc:7494
Change-Id: I61f50ab6d5ce24d19f4097e0f3fa8b0170010887
Reviewed-on: https://webrtc-review.googlesource.com/87422
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23873}
This CL adds two flags to audioproc_f. The flags control
AgcManagerDirect. The flags are
'--experimental_agc_agc2_level_estimator' and
'--experimental_agc_agc2_digital_adaptive'.
After this CL, the flags are be applied to AgcManagerDirect. The flags
have no effect in release-mode. They cause a crash in debug-mode.
In an upcoming CL, '--experimental_agc_agc2_level_estimator 1' will
replace the speech level estimation in ExperimentalAgc with that of
AGC2.
'--experimental_agc_agc2_digital_adaptive 1' will replace the digital
gain selection and application with that of AGC2.
These audioproc_f will activate both new settings:
./out/Target/audioproc_f --agc 1 --experimental_agc 1
--experimental_agc_agc2_digital_adaptive 1
--experimental_agc_agc2_level_estimator 1 --simulate_mic_gain 1
--simulated_mic_kind 2
See also https://webrtc-review.googlesource.com/c/src/+/79360
Bug: webrtc:7494
Change-Id: If0e65893dffdddb312e553787b8cedaf9a334323
Reviewed-on: https://webrtc-review.googlesource.com/86548
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23802}
This CL removes the remaining beamformer parts from the APM.
Bug: webrtc:9402
Change-Id: I9ab2795bd2813d17166ed0925125257b82d98a74
Reviewed-on: https://webrtc-review.googlesource.com/83340
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23694}
Running clang-format with chromium's style guide.
The goal is n-fold:
* providing consistency and readability (that's what code guidelines are for)
* preventing noise with presubmit checks and git cl format
* building on the previous point: making it easier to automatically fix format issues
* you name it
Please consider using git-hyper-blame to ignore this commit.
Bug: webrtc:9340
Change-Id: I694567c4cdf8cee2860958cfe82bfaf25848bb87
Reviewed-on: https://webrtc-review.googlesource.com/81185
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23660}
This is a no-op change because rtc::Optional is an alias to absl::optional
This CL generated by running script with parameter 'modules/audio_processing'
find $@ -type f \( -name \*.h -o -name \*.cc \) \
-exec sed -i 's|rtc::Optional|absl::optional|g' {} \+ \
-exec sed -i 's|rtc::nullopt|absl::nullopt|g' {} \+ \
-exec sed -i 's|#include "api/optional.h"|#include "absl/types/optional.h"|' {} \+
find $@ -type f -name BUILD.gn \
-exec sed -r -i 's|"(../)*api:optional"|"//third_party/abseil-cpp/absl/types:optional"|' {} \+;
git cl format
Bug: webrtc:9078
Change-Id: Id29f8de59dba704787c2c38a3d05c60827c181b0
Reviewed-on: https://webrtc-review.googlesource.com/83982
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23653}
Removes the usage of an injected/enabled beamformer in APM, and marks
the API parts as deprecated.
Initialization and process calls are removed, and all enabled/disabled
flags are replaced by assuming no beamforming. Additionally, an AGC test
relying on the beamformer as a VAD is removed.
Bug: webrtc:9402
Change-Id: I0d3d0b9773da083ce43c28045db9a77278f59f95
Reviewed-on: https://webrtc-review.googlesource.com/83341
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23643}
The echo detector is currently stored as a unique_ptr, but when injecting an echo detector, a scoped_refptr makes more sense since the ownership will be shared.
Bug: webrtc:8732
Change-Id: I2180014acb84f1cd5c361864a444b7b6574520f5
Reviewed-on: https://webrtc-review.googlesource.com/83325
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23610}
CustomProcessing is the interface to injectable audio processing
submodules to AudioProcessing. This CL makes it possible to set
runtime settings on the injected render processing component.
Note that the current runtime setting handling happens on the capture
thread. Therefore, we add another SwapQueue to communicate with the
render thread.
Bug: webrtc:9138, webrtc:9262
Change-Id: I665ce2d83a2b35ca8b25cca813d2cef7bd0ba911
Reviewed-on: https://webrtc-review.googlesource.com/76123
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23236}
Add configuration fields for the pre-amplifier in the Audio Processing
Module. Also add flags and settings for the pre-amplifier in
audioproc_f.
Also make the setting stored in Aec Dumps. And make the setting
applied when playing back Aec Dumps in audioproc_f.
Bug: webrtc:9138
Change-Id: I4e59df200e1ebc56f06fae74ebf17d85858958a3
Reviewed-on: https://webrtc-review.googlesource.com/69560
Reviewed-by: Oleh Prypin <oprypin@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22876}
This CL includes the following changes:
- APM runtime setting (ID + float payload) and unit tests
- Swap queue of APM runtime settings used in AudioProcessingImpl
- runtime settings handler that forwards the settings to APM
sub-modules when a message is retrieved from the queue
- Unit test placeholder to check that the pre-gain update message
is correctly delivered
Bug: webrtc:9138
Change-Id: Id22704af15fde2b87a4431f5ce64ad1aeafc5280
Reviewed-on: https://webrtc-review.googlesource.com/69320
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22873}
We update the configuration settings for AGC2. We also update their
effects. Now, 'gain_controller2.enable=true' means 'first run Adaptive
AGC2; then run AGC2 limiter'.
Previously, only the AGC2 limiter was implemented. To run that, one
had to set both 'gain_controller2.enable=true' and
'gain_controller2.enable_limiter=true'.
This setting also enables adaptive AGC2 in the test tool 'audioproc_f'.
Bug: webrtc:7494
Change-Id: I0d5dfe443f2cdc0ecf3aa4054442dab6276d284d
Reviewed-on: https://webrtc-review.googlesource.com/64990
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22669}
Since the echo detector processes both the render and the capture audio streams, it needs to know the sample rates and number of channels of both.
Bug: webrtc:8732
Change-Id: Icd26e561d5dd98bd789a6dfa75f468f3fde06fee
Reviewed-on: https://webrtc-review.googlesource.com/61861
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22436}
This is a reland of 6f37ed78d9
CQ dry run OK except for missing iOS swarming bots.
NOTRY=True
Original change's description:
> Deprecate the adaptive level controller
>
> Level control handled by default-on AGC.
>
> Bug: none
> Change-Id: I405daeceece12c896d41156b649fcfd556726f77
> Reviewed-on: https://webrtc-review.googlesource.com/59682
> Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
> Reviewed-by: Alex Loiko <aleloi@webrtc.org>
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#22305}
Bug: none
Change-Id: I0b9b8e2f3457d5efd4603efbfbbc6b84651df315
Reviewed-on: https://webrtc-review.googlesource.com/60720
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22352}
This provides the empty shell of an AudioGenerator class.
It is intended to be used for debugging purposes and can be inserted
into the APM much like an AecDump. It allows for playing out diagnostic
audio unaffected by codecs and network jitter, while still capturing
API interaction like in a normal call.
NOTRY=True
Bug: webrtc:8882
Change-Id: I8132afc95cdba02ab233f44e22e0a5f530710ef7
Reviewed-on: https://webrtc-review.googlesource.com/53300
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22282}
Note: estimation is turned OFF if config_.ep_strength.default_len
is set >= 0 (in this case config_.ep_strength.default_len defines a
constant echo decay factor), and hence turned ON if < 0. In case the
echo tail estimation is turned ON, -config_.ep_strength.default_len is
the starting point for the estimator.
The estimation is done in two passes; first we go through all "sections"
(corresponding to chunks of length kFftLengthBy2) of the filter impulse
response to determine which sections correspond to a "stable" decay",
and then the second pass we go through each stable decay section and
estimate the decay. The actual decay estimation is based on linear
regression of the log magnitude of the squared impulse response.
A bunch of sanity checks are also performed continuously to avoid
estimation error during e.g., filter adaptation.
Bug: webrtc:8924
Change-Id: I686ce3f3e8b6b472348f8d6e01fb44c31e25145d
Reviewed-on: https://webrtc-review.googlesource.com/48440
Commit-Queue: Christian Schuldt <cschuldt@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22247}
The AEC3 factory is now part of the WebRTC API.
Bug: webrtc:8844
Change-Id: If6f419b4ca0354e2d346c0e6474086e456ba747e
Reviewed-on: https://webrtc-review.googlesource.com/57141
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22204}
The FixedGainController (FGC) applies a fixed gain. It will also
control the limiter. The limiter will be landed over the next several
CLs.
The GainController2 is a 'private submodule' of APM. It will control
the new automatic gain controller (AGC). It controls the AGC through
Initialize() and ApplyConfig().
This CL contains
* build changes to make modules/audio_processing/agc2 an independent
target
* a new MutableFloatAudioFrame which is the audio interface between
AGC2 and APM
* move of the fixed gain application from GainController2 to
FixedGainController.
If you are a googler, there is more information in this doc:
https://docs.google.com/document/d/1RV2Doet3MZtUPAHVva61Vjo20iyd1bmmm3aR8znWpzo/edit#
Bug: webrtc:7949
Change-Id: Ief95cbbce83c3aafe54638fd2ab881c9fb8bdc3a
Reviewed-on: https://webrtc-review.googlesource.com/50440
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22046}
This is one of several small steps of separating APM and AEC3.
Bug: webrtc:8844
Change-Id: Ib6e518fec5f7566cab3823ab35fcede8433f8f4e
Reviewed-on: https://webrtc-review.googlesource.com/53142
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22028}
This CL adds robustness in terms of echo removal and faster recovery
in order to regain echo canceller transparency after echo path changes.
The CL does:
-Improve the adaptation rate of the linear filter.
-Increase the look-window used before the linear filter has adapted.
-Decrease the effects of missed detection of residual echo.
-Increase the safety margin before allowing the suppressor gain to
increase.
Bug: chromium:804873,webrtc:8788
Change-Id: I28eedc4c8d0a4f0bc7b79c02d6d59bf00fddd566
Reviewed-on: https://webrtc-review.googlesource.com/48721
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21917}
Due to the growing number of arguments, these functions are being replaced by the AudioProcessingBuilder class.
Bug: webrtc:8668
Change-Id: Ic3936fbd47d92eac22a857a678dca5fd8c029d8b
Reviewed-on: https://webrtc-review.googlesource.com/46241
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21826}
This CL generalizes the hysteresis behavior on the AEC3 delay estimator
to be two-sided and easier to configure.
Bug: webrtc:8671
Change-Id: Ife21c1511416e32eb3618c81178deefe332ac1e8
Reviewed-on: https://webrtc-review.googlesource.com/39267
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21604}
This adds a generic interface for an echo detector, and makes it possible to inject one into the audio processing module.
Bug: webrtc:8732
Change-Id: I30d97aeb829307b2ae9c4dbeb9a3e15ab7ec0912
Reviewed-on: https://webrtc-review.googlesource.com/38900
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21588}
The AudioProcessingBuilder was recently introduced in https://webrtc-review.googlesource.com/c/src/+/34651 to make it easier to create APM instances. This CL replaces all calls to the old Create methods with the new AudioProcessingBuilder.
Bug: webrtc:8668
Change-Id: Ibb5f0fc0dbcc85fcf3355b01bec916f20fe0eb67
Reviewed-on: https://webrtc-review.googlesource.com/36082
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21534}
As the number of injectable components of the APM increases, it is become increasingly unwieldy to keep expanding the Create function with more parameters. This builder class should make it easier to inject more components in the future.
Bug: webrtc:8668
Change-Id: If91547527760486c2a4daa9696bee22ec1d7675e
Reviewed-on: https://webrtc-review.googlesource.com/34651
Commit-Queue: Ivo Creusen <ivoc@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21425}
This CL adds a way to insert a custom render-side pre-processor to
APM. The pre-processor operates in full-band mode before anything
else. Currently the render processing chain is (if everything is
enabled):
Network --> [Pre processing] --> [Band split] -->
[IntelligibilityEnhancer] --> [Echo canceller (read-only)] -->
[Band merge] --> Playout
Since the render pre processor and capture post processor have the
same interface, I renamed webrtc::PostProcessing into
webrtc::CustomProcessing.
The old APM factory method PostProcessing will be deprecated and
dependencies updated as part of webrtc:8665
NOTRY=True
Bug: webrtc:8665
Change-Id: Ia381cbf12e336d6587406a14d77243d931f69a31
Reviewed-on: https://webrtc-review.googlesource.com/29201
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21327}
This CL adjusts the filter adaptation behavior to better handle
reverberant environments and environments with poor SNR.
It furthermore updates the unittests to handle the reduced adaptation
speed.
Bug: webrtc:8661
Change-Id: I5f1b5a4a34b333bd6c643ed3727899d0838dbf90
Reviewed-on: https://webrtc-review.googlesource.com/34184
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21323}
This CL reverts the changes introduced that handles echoes in AEC3.
The revert is done to match the behavior which is in M63.
Bug: webrtc:8615,chromium:792346
Change-Id: I128ccb17dc359c7889a701a2faaaf06be40f86dd
Reviewed-on: https://webrtc-review.googlesource.com/30140
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21117}
This CL centralizes the render buffering in AEC3 so that all render
buffers are updated and synchronized/aligned with the render alignment
buffer.
Bug: webrtc:8597, chromium:790905
Change-Id: I8a94e5c1f27316b6100b420eec9652ea31c1a91d
Reviewed-on: https://webrtc-review.googlesource.com/25680
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20989}
