This CL adds basic the basic pipeline to support multi-channel
processing in AEC3.
Apart from that, it removes the 8 kHz processing support in several
places of the AEC3 code.
Bug: webrtc:10913
Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29017}
This change fixes a bug where the initial delay could be set incorrectly.
Bug: webrtc:10896
Change-Id: I66b2234b69c46639488f4561e973384001230861
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149820
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28894}
This change makes it possible to disable AEC3's render delay
controller and delay estimator, and instead rely on an external
delay estimator. The delay is communicated via SetAudioBufferDelay.
When the feature is enabled, no echo removal will be performed
until the first delay is provided.
The delay is
Bug: b/130016532
Change-Id: I16643109d78d770ff1d2713cf247b0b9cce1bc1c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131327
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27467}
This CL removes the legacy, no longer used, render buffering code. It
also removes four unused parameters from the AEC3 config. The change
is tested for bit-exactness.
Bug: webrtc:8671
Change-Id: I2bb6cb7a1097863f228767d757d551c00593bb00
Reviewed-on: https://webrtc-review.googlesource.com/c/119701
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26399}
This CL is the result of running include-what-you-use tool on part
of the code base (audio target and dependencies) plus manual fixes.
bug: webrtc:8311
Change-Id: I277d281ce943c3ecc1bd45fd8d83055931743604
Reviewed-on: https://webrtc-review.googlesource.com/c/106280
Commit-Queue: Yves Gerey <yvesg@google.com>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25311}
This CL simplifies the buffering of render data. Instead of making assumptions
about the worst possible platform, it leverages recent improvements in
the delay estimator to quickly adapt when the conditions change.
Pros:
- No capture delay, delay is found ~200 ms faster.
- Cleaner code that makes the concept of delay more clear.
- Allows for removal of one matched filter because of the jitter headroom
removal.
Cons:
- Delay estimator needs to re-adapt when the call jitter increases.
The code can be deactivated by a kill switch. When the kill switch is
pulled the CL is bit exact.
Bug: webrtc:9726,chromium:895338
Change-Id: Ie2f9c8c5ce5b5a4510b4bdb95db2b970b57cd5d0
Reviewed-on: https://webrtc-review.googlesource.com/c/96920
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25169}
This is a no-op change because rtc::Optional is an alias to absl::optional
This CL generated by running script with parameter 'modules/audio_processing'
find $@ -type f \( -name \*.h -o -name \*.cc \) \
-exec sed -i 's|rtc::Optional|absl::optional|g' {} \+ \
-exec sed -i 's|rtc::nullopt|absl::nullopt|g' {} \+ \
-exec sed -i 's|#include "api/optional.h"|#include "absl/types/optional.h"|' {} \+
find $@ -type f -name BUILD.gn \
-exec sed -r -i 's|"(../)*api:optional"|"//third_party/abseil-cpp/absl/types:optional"|' {} \+;
git cl format
Bug: webrtc:9078
Change-Id: Id29f8de59dba704787c2c38a3d05c60827c181b0
Reviewed-on: https://webrtc-review.googlesource.com/83982
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23653}
This CL adds support for using any externally reported audio buffer
delay to set the initial alignment in AEC3 which is used before the
AEC has been able to detect the delay.
Bug: chromium:834182,webrtc:9163
Change-Id: Ic71355f69b7c4d5815b78e49987043441e7908fb
Reviewed-on: https://webrtc-review.googlesource.com/70580
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22917}
This CL robustifies the echo removal behavior when headsets are used.
In particular it:
-Introduces a secondary, more refined alignment when no alignment can
be found using the delay estimator.
-Changes decision logic for when to use the linear filter output.
-Changes the decision logic for when to be transparent.
-Changes the way that the transparent mode works.
-Makes the nonlinear mode less aggressive.
-Removes the detector for non-audible echoes.
-Makes the attenuation when there are signals with strong narrowband
characteristics more mild in scenarios with low render.
Furthermore the CL:
-Removes the input of external echo leakage information.
Bug: webrtc:9047,chromium:824111,webrtc:8314,webrtc:8671,webrtc:5201,webrtc:5919
Change-Id: Ied1fe0c0a35d3c31b47606ed2db319a73644d406
Reviewed-on: https://webrtc-review.googlesource.com/60866
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22548}
Avoid including audio_processing.h from within AEC3.
Bug: webrtc:8844
Change-Id: I02c475c2fb84e2c24eac86baac3c7edaa08bebc0
Reviewed-on: https://webrtc-review.googlesource.com/53065
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22029}
The faster AEC3 alignment introduced recently may in
cases cause the alignment (and the AEC3) to repeatedly
reset. This CL avoids these resets by handling buffer
issues (which are triggering the resets) separately
during the initial coarse alignment phase.
Change-Id: Idf5e2ffda2591906da8060d03ec8ca73cdaedf53
Bug: webrtc:8798,chromium:805815
Reviewed-on: https://webrtc-review.googlesource.com/43480
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21758}
This CL modifies the refactored render buffering scheme in AEC3
so that:
-A non-causal state can never occur which means that situations with
nonrecoverable echo should not occur.
-For a stable audio pipeline with a predefined API call jitter,
render overruns and underruns can never occur.
Bug: webrtc:8629,chromium:793305
Change-Id: I06ba1c368f92db95274090b08475dd02dbb85145
Reviewed-on: https://webrtc-review.googlesource.com/29861
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#21215}
This CL centralizes the render buffering in AEC3 so that all render
buffers are updated and synchronized/aligned with the render alignment
buffer.
Bug: webrtc:8597, chromium:790905
Change-Id: I8a94e5c1f27316b6100b420eec9652ea31c1a91d
Reviewed-on: https://webrtc-review.googlesource.com/25680
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20989}
This CL refactors the delay estimator in AEC3.
Furthermore, it adds:
1. Allow for a customized delay estimator behavior to simplify
development.
2. Exposes that behavior to clear configuration settings.
3. Adds logging of the delay range supported by the delay
estimator.
Bug: webrtc:8519
Change-Id: I1764a090519a78b021b2e7de565c52a6c02c848e
Reviewed-on: https://webrtc-review.googlesource.com/21166
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#20733}
In https://webrtc-review.googlesource.com/c/src/+/1560 we moved WebRTC
from src/webrtc to src/ (in order to preserve an healthy git history).
This CL takes care of fixing header guards, #include paths, etc...
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iea91618212bee0af16aa3f05071eab8f93706578
Reviewed-on: https://webrtc-review.googlesource.com/1561
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19846}
In order to eliminate the WebRTC Subtree mirror in Chromium,
WebRTC is moving the content of the src/webrtc directory up
to the src/ directory.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iac59c5b51b950f174119565bac87955a7994bc38
Reviewed-on: https://webrtc-review.googlesource.com/1560
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19845}
2017-09-15 04:25:06 +00:00
Renamed from webrtc/modules/audio_processing/aec3/render_delay_buffer.h (Browse further)
