After this CL lands, an announcement will be made to
discuss-webrtc about the deprecation of one version
of InitEncode().
Bug: webrtc:10720
Change-Id: Ib992af0272bbb16ae16ef7e69491f365702d179e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/140884
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28224}
As this is handled higher up the pipeline in a single
place for all encoders/decoders
Bug: webrtc:10460
Change-Id: I95b0a69aecaf07283c8776ac0d7e85d097e3576b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/139882
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28172}
Using this flag, an encoder may inform the RTP sender module that
the packet is not elligible for retransmission. Specifically, it
may not be retransmitted in response to a NACK message,
nor because of early loss detection (see CL #135881).
Bug: webrtc:10702
Change-Id: Ib6a9cc361cf10ea7214cf672e05940c27899a6be
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/140105
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28169}
Because of a low bitrate target, base layer has drops much more frequently
than other layers. But it reduces overall framerate, especially then
input framerate is low (5 fps).
This CL allows pre-layer drops and disables droppoing on higher spatial
layers for screenshare, solving the issue.
Additional care have to be taken then new spatial layers are enabled
dynamically to not create non-compatible with RTP references.
Bug: webrtc:10257
Change-Id: Ie056484c99a3f35ff4405ef71337dc2d034db8bb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/138262
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28063}
This CL makes it more flexible and easier to include/exclude H264 code
when using other build systems because it delegates the decision to
remove the code to the preprocessor instead of GN.
This CL should be a noop, and for WebRTC/Chromium the GN param
`rtc_use_h264` will still be the only thing to change in order to
include/exclude H264.
Moving code that requires ffmpeg or h264 out of the #ifdef/#endif
part should break the build since dependencies are only added if
`rtc_use_h264=true`.
Bug: webrtc:9213
Change-Id: Ibc04edc2f6b9e51489ffe638d5be4b32959cdca0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/137430
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28055}
Reland with fixes.
If input framerate is a little unstable, using it to cap layers will
make output framerate even smaller for longer periods of time.
Also, fix screenshare_loopback test for low-fps vp9 testing.
Bug: webrtc:10257
Change-Id: Id40a780d461e6b51cb44d275b8aa5d7b348d3586
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/138215
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28054}
This reverts commit eb1754c575.
Reason for revert: breaks downstream projects
Original change's description:
> VP9 screenshare: Don't base layers frame-rate on input frame-rate
>
> If input framerate is a little unstable, using it to cap layers will
> make output framerate even smaller for longer periods of time.
>
> Also, fix screenshare_loopback test for low-fps vp9 testing.
>
> Bug: webrtc:10257
> Change-Id: I64aa087e859ab4ab8e484c9ab7f5ac0fb18bd37d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/138204
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28050}
TBR=ilnik@webrtc.org,ssilkin@webrtc.org
Change-Id: I82bfbac58249cfe0da5ff565aa97a4745fd078ff
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10257
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/138213
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28051}
If input framerate is a little unstable, using it to cap layers will
make output framerate even smaller for longer periods of time.
Also, fix screenshare_loopback test for low-fps vp9 testing.
Bug: webrtc:10257
Change-Id: I64aa087e859ab4ab8e484c9ab7f5ac0fb18bd37d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/138204
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28050}
Ensure that frame_buffer_controller_ does not get assigned null
by the factory.
Bug: None
Change-Id: I84e141ae0390cd024863f88cdcdc79b8b13e7c64
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/137043
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27962}
Reland with fixes.
Currently some video frames metadata like rotation or ntp timestamps are
copied in every encoder and decoder separately. This CL makes copying to
happen at a single place for send or receive side. This will make it
easier to add new metadata in the future.
Also, added some missing tests.
Original Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133346
Bug: webrtc:10460
Change-Id: I98629589fa55ca1d74056033cf86faccfdf848cd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/136582
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27930}
This reverts commit bd20c3f5ae.
Reason for revert: chromium:961253
This CL is not the cause of the regression, but reverting it will make the reverting of the actual cause easier.
Original change's description:
> Rename configurations_ to vpx_configs_ in LibvpxVp8Encoder
>
> Bug: None
> Change-Id: I548a724f0fb81f46785517c90e527edc075e1476
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/135040
> Commit-Queue: Elad Alon <eladalon@webrtc.org>
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27836}
TBR=brandtr@webrtc.org,eladalon@webrtc.org
Bug: chromium:961253
Change-Id: I707337e0ce50f29f9cda7cf45500c11debace1a2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/135750
Reviewed-by: Elad Alon <eladalon@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27898}
This reverts commit 4fb12b0cae.
Reason for revert: Breaks some asan chromium bots
Original change's description:
> Reland "Copy video frames metadata between encoded and plain frames in one place"
>
> Reland with fixes.
>
> Currently some video frames metadata like rotation or ntp timestamps are
> copied in every encoder and decoder separately. This CL makes copying to
> happen at a single place for send or receive side. This will make it
> easier to add new metadata in the future.
>
> Also, added some missing tests.
>
> Original Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133346
>
> Bug: webrtc:10460
> Change-Id: Ia71198685de7fbd990704b575231cdce94dc0645
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134961
> Reviewed-by: Johannes Kron <kron@webrtc.org>
> Reviewed-by: Niels Moller <nisse@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27828}
TBR=ilnik@webrtc.org,nisse@webrtc.org,sprang@webrtc.org,kron@webrtc.org,artit@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:10460
Change-Id: I9c87a43a716622b389974cb8377f973573fc29a5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/135747
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27895}
Make Vp8FrameBufferController::UpdateConfiguration return a set
of desired overrides. These overrides are cumulative with
previously returned override sets.
Bug: webrtc:10382
Change-Id: I1aa9544ae0cf6c57115e80963b3bbcdc3101db5e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134649
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27835}
Reland with fixes.
Currently some video frames metadata like rotation or ntp timestamps are
copied in every encoder and decoder separately. This CL makes copying to
happen at a single place for send or receive side. This will make it
easier to add new metadata in the future.
Also, added some missing tests.
Original Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133346
Bug: webrtc:10460
Change-Id: Ia71198685de7fbd990704b575231cdce94dc0645
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134961
Reviewed-by: Johannes Kron <kron@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27828}
The color space can either be specified in the VUI of the H264 bitstream
or using an RTP header extension. The color space set through the RTP
header extension overrides the color space in the VUI. The check for
HDR should look at the resulting color space.
Bug: webrtc:10575
Change-Id: I0ca6262d76d56dea938de169f55ad3894e6c4f8f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134860
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27816}
In this CL:
- Assign frame IDs so that simulcast streams share one frame ID space.
- Added a CodecBufferUsage class that represent how a particular buffer
was used (updated, referenced or both).
- Calculate frame dependencies based on the CodecBufferUsage information.
Bug: webrtc:10342
Change-Id: I4ed5ad703f9376a7d995c04bb757c7d214865ddb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131287
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27784}
8-bit H264 HDR content is not rendered correctly in Chrome on Windows.
This is a temporary fix that converts the 8-bit buffer to a 10-bit
buffer if the color space indicates that the buffer should be
rendered as HDR.
Bug: webrtc:10575
Change-Id: I106612ec489c6371fa774424a4cf07d9bad40fc3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134040
Commit-Queue: Johannes Kron <kron@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27766}
This reverts commit c9a2c5e93a.
Reason for revert: Breaks downstream test
Original change's description:
> Reland "Copy video frames metadata between encoded and plain frames in one place"
>
> Reland with fixes: Do not remove extra metadata copies in software decoders as some downstream projects assumes these fields are copied by the encoders.
>
> Currently some video frames metadata like rotation or ntp timestamps are
> copied in every encoder and decoder separately. This CL makes copying to
> happen at a single place for send or receive side. This will make it
> easier to add new metadata in the future.
>
> Also, added some missing tests.
>
> Original Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133346
>
> Bug: webrtc:10460
> Change-Id: I8e49589bf75f406e2b5ddee34882de0faedbd09a
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134102
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Johannes Kron <kron@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27756}
TBR=ilnik@webrtc.org,sprang@webrtc.org,kron@webrtc.org,artit@webrtc.org
Change-Id: I34cc563ec6383735c2a76a6f45a72a7726b74421
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10460
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134204
Reviewed-by: Artem Titarenko <artit@google.com>
Commit-Queue: Artem Titarenko <artit@google.com>
Cr-Commit-Position: refs/heads/master@{#27765}
Reland with fixes: Do not remove extra metadata copies in software decoders as some downstream projects assumes these fields are copied by the encoders.
Currently some video frames metadata like rotation or ntp timestamps are
copied in every encoder and decoder separately. This CL makes copying to
happen at a single place for send or receive side. This will make it
easier to add new metadata in the future.
Also, added some missing tests.
Original Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133346
Bug: webrtc:10460
Change-Id: I8e49589bf75f406e2b5ddee34882de0faedbd09a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134102
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Johannes Kron <kron@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27756}
LibvpxVp8Encoder::Encode() creates a local instance of
rtc::scoped_refptr<I420BufferInterface>, then sets members to
point into the internal state of that I420BufferInterface. These
pointers remain in place after the buffer is destroyed.
This CL fixes the issue by deleting the references when the
function exits.
Bug: webrtc:10570
Change-Id: I9623e2ff3dd43e8fd1d1cc7696a3f28227d4544b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133882
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27738}
This reverts commit 00d0a0a1a9.
Reason for revert: Breaks downstream tests
Original change's description:
> Copy video frames metadata between encoded and plain frames in one place
>
> Currently some video frames metadata like rotation or ntp timestamps are
> copied in every encoder and decoder separately. This CL makes copying to
> happen at a single place for send or receive side. This will make it
> easier to add new metadata in the future.
>
> Also, added some missing tests.
>
> Bug: webrtc:10460
> Change-Id: Ia49072c3041e75433f125a61050d2982b2bec1da
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133346
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Johannes Kron <kron@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27719}
TBR=ilnik@webrtc.org,sprang@webrtc.org,kron@webrtc.org
Change-Id: I8960a6cc15e552925129ba0037f197ff3fd93c25
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10460
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/134100
Reviewed-by: Artem Titarenko <artit@webrtc.org>
Commit-Queue: Artem Titarenko <artit@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27737}
The function iterated over two containers, destroyed their elements
and popped those elements one at a time. It's more efficient to
destroy all of the elements, then clear() the container.
Bug: None
Change-Id: I17aa88694ee41df64c5793b08b96899b7ff04071
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133901
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27730}
Currently some video frames metadata like rotation or ntp timestamps are
copied in every encoder and decoder separately. This CL makes copying to
happen at a single place for send or receive side. This will make it
easier to add new metadata in the future.
Also, added some missing tests.
Bug: webrtc:10460
Change-Id: Ia49072c3041e75433f125a61050d2982b2bec1da
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133346
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Johannes Kron <kron@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27719}
Rename "UpdateLayerConfig" to the more appropriate "NextFrameConfig".
Also update some comments in vp8_frame_buffer_controller.h.
Bug: None
Change-Id: Iba8227f84e33e5ebd28d2eeb10fe03e776036603
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133202
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27660}
A typo in a previous CL made OnLossNotification() accept its
single argument as a const-value, rather than a const-reference.
Bug: webrtc:10501
Change-Id: I5e6f9c79f15205b75ec90a53d3fccf3dd9927e33
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/133343
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27659}
Prior to this CL, this was indicated by passing |size_bytes| = 0
to the method.
Bug: webrtc:10501
Change-Id: Icff3bb83344834dc62d62bde5ec5d05096a08e11
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132712
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27620}
This allows picking up the output in Android tests, where stdout/stderr
is lost but RTC_LOGs are picked up by the org.webrtc.Logging utility.
Tested: Downstream Android tests.
Bug: webrtc:10349
Change-Id: I1379f4303640dbc9621c64d9c88cf61bc8447ab6
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132704
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27616}
This CL adds an experiment where aggressiveness of the rate controller
is tuned based on if the application is network constrained or not.
Bug: webrtc:10155
Change-Id: I6c8cd116f57321c5b36cf5a69840913936091aaa
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132786
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27615}
The former became redundant and didn't guarantee
numerical stability for variance computation.
Bug: webrtc:10412
Change-Id: Idc291abe9add41bde9e7734f179e5d6c65f2630b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132460
Commit-Queue: Yves Gerey <yvesg@google.com>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27605}
This is a reland of 7ac0d5f348
Original change's description:
> Replace usage of old SetRates/SetRateAllocation methods
>
> This rather large CL replaces all relevant usage of the old
> VideoEncoder::SetRates()/SetRateAllocation() methods in WebRTC.
> API is unchanged to allow downstream projects to update without
> breakage.
>
> Bug: webrtc:10481
> Change-Id: Iab8f292ce6be6c3f5056a239d26361962b14bb38
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131949
> Commit-Queue: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Per Kjellander <perkj@webrtc.org>
> Reviewed-by: Niels Moller <nisse@webrtc.org>
> Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27554}
TBR=brandtr@webrtc.org,sakal@webrtc.org,perkj@webrtc.org
Bug: webrtc:10481
Change-Id: I2978d5c527a18e885b7845c4e53a2424e8ad5b4b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132551
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27593}
profile-level-id for H.264 comes in through the SdpVideoFormat,
rather than through these members.
Bug: None
Change-Id: I9c4ea8873346ca16174aecf5f90a649cbaf913dd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132545
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27571}
This reverts commit 7ac0d5f348.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Replace usage of old SetRates/SetRateAllocation methods
>
> This rather large CL replaces all relevant usage of the old
> VideoEncoder::SetRates()/SetRateAllocation() methods in WebRTC.
> API is unchanged to allow downstream projects to update without
> breakage.
>
> Bug: webrtc:10481
> Change-Id: Iab8f292ce6be6c3f5056a239d26361962b14bb38
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131949
> Commit-Queue: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Per Kjellander <perkj@webrtc.org>
> Reviewed-by: Niels Moller <nisse@webrtc.org>
> Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27554}
TBR=brandtr@webrtc.org,sakal@webrtc.org,nisse@webrtc.org,sprang@webrtc.org,perkj@webrtc.org
Change-Id: I576760b584e3f258013b0279c0c173c895bbb37e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10481
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132561
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Minyue Li <minyue@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27559}
This rather large CL replaces all relevant usage of the old
VideoEncoder::SetRates()/SetRateAllocation() methods in WebRTC.
API is unchanged to allow downstream projects to update without
breakage.
Bug: webrtc:10481
Change-Id: Iab8f292ce6be6c3f5056a239d26361962b14bb38
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131949
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27554}
Semi-automatically created with:
git grep -l " testing::" | xargs sed -i "s/ testing::/ ::testing::/g"
git grep -l "(testing::" | xargs sed -i "s/(testing::/(::testing::/g"
git cl format
After this, two .cc files failed to compile and I have fixed them
manually.
Bug: webrtc:10523
Change-Id: I4741d3bcedc831b6c5fdc04485678617eb4ce031
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132018
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27526}
After https://webrtc-review.googlesource.com/c/src/+/131141 there are some minor
changes to the encoding performance, hence the updated values.
Bug: none
Change-Id: Ifa661eea15a0d52f4760f4aac9294074faab757f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131382
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27463}
This fixes a regression introduces way back in August 2018:
https://webrtc-review.googlesource.com/c/src/+/91863/
For bonus points, also fixing an auxiliary test issue.
Bug: webrtc:10479, webrtc:10260
Change-Id: I4e99fe6e070446d10357d9d1a9d1ffc9dedcf419
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129926
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27409}
And delete corresponding dependencies on :webrtc_common. After this
change, common_types.h is included directly only from code in the
following directories:
api/
api/video/
api/video_codecs/
common_video/libyuv/include/
media/base/
modules/remote_bitrate_estimator/
modules/rtp_rtcp/source/
modules/video_coding/codecs/vp9/
There remains plenty of indirect dependencies on the types declared in
common_types.h, but the fewer direct dependencies should make it
easier to find the proper place for each type.
Bug: webrtc:5876
Change-Id: I93e8f214025ecb613c19fdec2015bd3f96c59aae
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/130501
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27376}
In this CL:
- Created static helper function GenericFrameInfo::DecodeTargetInfo to
convert DTI symbols to a list of GenericFrameInfo::OperatingPointIndication.
- Added per frame DTI information for the different stream structures.
Bug: webrtc:10342
Change-Id: I62ff2e9fc9b380fe1d0447ff071e86b6b35ab249
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129923
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27350}
- Add GetFrameStatistics API:
This is useful for downstream test users that want to read frame-level stats.
- Remove other APIs that are not used by downstream tests:
* AddFrame
* GetFrame
* GetFrameWithTimestamp
* SliceAndCalcAggregatedVideoStatistic
* PrintFrameStatistics
* Size
* Clear
The implementations, which are used by the fixture implementation, are kept.
Bug: webrtc:10349
Change-Id: Id2f6fa5a36b8341a5ccb365725f71ebe0c0f1570
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/128779
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27306}
Injection is made possible through VP8Encoder::Create.
According to native-api.md, it is a defacto public API despite
not being in the api/ folder.
Bug: webrtc:10259, webrtc:10382
Change-Id: Ifc5d55aa99613cfee0fcb4f0c6690121c85b2e3e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/128883
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27281}
This allows offline visualization of the different TL.
For now, there is no need to do the same for the decoded frames.
Bug: webrtc:10349
Tested: 1) ninja -C out/Debug; and out/Debug/modules_tests --gtest_filter="*MultiresVP8*:*SvcVP9*". 2) Downstream tests.
Change-Id: Iaf5ab19ee681488706d8777a5adba78efd5cc1ee
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/128861
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Mirta Dvornicic <mirtad@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27240}
This CL paves the way to making FrameBufferController injectable.
LibvpxVp8Encoder can manage multiple streams. Prior to this CL,
each stream had its own frame buffer controller, all of them held
in a vector by LibvpxVp8Encoder. This complicated the code and
produced some code duplication (cf. SetupTemporalLayers).
This CL:
1. Replaces CreateVp8TemporalLayers() by a factory. (Later CLs
will make this factory injectable.)
2. Makes LibvpxVp8Encoder use a single controller. This single
controller will, in the case of multiple streams, delegate
its work to multiple controllers, but that fact is not visible
to LibvpxVp8Encoder.
This CL also squashes CL #126046 (Send notifications of RTT and
PLR changes to Vp8FrameBufferController) into it.
Bug: webrtc:10382
Change-Id: Id9b55734bebb457acc276f34a7a9e52cc19c8eb9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126483
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27206}
To remove global task factory, rtc::TaskQueue need to loose it's convenient constructor
TaskQueueForTest can be used instead in tests and keep the convenient constructor.
Also cleanup the TaskQueueForTest a bit:
move the class to webrtc namespace
add default constructor
disallow copy using language construct instead of macro
cleanup build dependencies
rename build target (to match move out of the rtc namespace)
Bug: webrtc:10284
Change-Id: I17fddf3f8d4f363df7d495c28a5b0a28abda1ba7
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/127571
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27193}
This is a reland after changes to the downstream project
VP9 screenshare is not used currently, and with these values according
to local testing with screenshare_loopback, we get performance not worse than current vp8 settings for similar uplink and downlink values.
Original Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126226
Bug: webrtc:10257
Change-Id: Ib21d7678bd839a3c47457515b0d768c0b979ea40
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126524
Reviewed-by: Johannes Kron <kron@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27040}
This reverts commit 12abf671fd.
Reason for revert: Breaks downstream project.
Original change's description:
> Reland "Tune vp9 screenshare bitrate and framerate of spatial layers"
>
> This is a reland without any changes as it seems problems with webrtc-in-chrome importer were flakes or
> caused by some issues within chrome codebase.
>
> Tune vp9 screenshare bitrate and framerate of spatial layers
>
> VP9 screenshare is not used currently, and with these values according
> to local testing with screenshare_loopback, we get performance not worse than current vp8 settings for similar uplink and downlink values.
>
> Original Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126226
>
> Bug: webrtc:10257
> Change-Id: Ie819d8bbab4f14877daac733d162e5ae7ebf2a8e
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126460
> Reviewed-by: Johannes Kron <kron@webrtc.org>
> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27036}
TBR=ilnik@webrtc.org,jeroendb@webrtc.org,kron@webrtc.org
Change-Id: I9ad9017b054213f931b3b39c641060d35565f17d
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10257
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126523
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27037}
This is a reland without any changes as it seems problems with webrtc-in-chrome importer were flakes or
caused by some issues within chrome codebase.
Tune vp9 screenshare bitrate and framerate of spatial layers
VP9 screenshare is not used currently, and with these values according
to local testing with screenshare_loopback, we get performance not worse than current vp8 settings for similar uplink and downlink values.
Original Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126226
Bug: webrtc:10257
Change-Id: Ie819d8bbab4f14877daac733d162e5ae7ebf2a8e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126460
Reviewed-by: Johannes Kron <kron@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27036}
This reverts commit aaf3cb3adb.
Reason for revert: Chrome importer consitently failing after this change
Original change's description:
> Tune vp9 screenshare bitrate and framerate of spatial layers
>
> VP9 screenshare is not used currently, and with these values according
> to local testing with screenshare_loopback, we get performance not worse
> than current vp8 settings for similar uplink and downlink values.
>
> Bug: webrtc:10257
> Change-Id: Icabac04fbd3d616412bbae59291a1fc026d0a504
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126226
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Johannes Kron <kron@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27023}
TBR=ilnik@webrtc.org,kron@webrtc.org
Change-Id: I1ef1eeec8fe87a7662a354ef6362b7d463b2bb4c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10257
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126340
Reviewed-by: Jeroen de Borst <jeroendb@webrtc.org>
Commit-Queue: Jeroen de Borst <jeroendb@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27027}
VP9 screenshare is not used currently, and with these values according
to local testing with screenshare_loopback, we get performance not worse
than current vp8 settings for similar uplink and downlink values.
Bug: webrtc:10257
Change-Id: Icabac04fbd3d616412bbae59291a1fc026d0a504
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126226
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27023}
These are used by the test runner to pick up perf values
to be shown in the perf dashboard.
Bug: webrtc:10349
Change-Id: Ib3b2479f7a20b66192751bee8237d757f5870bd2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126220
Reviewed-by: Mirta Dvornicic <mirtad@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27020}
This cl deprecates the FrameType enum, and adds aliases AudioFrameType
and VideoFrameType.
After downstream usage is updated, the enums will be separated
and be moved out of common_types.h.
Bug: webrtc:6883
Change-Id: I2aaf660169da45f22574b4cbb16aea8522cc07a6
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/123184
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27011}
Vp8FrameBufferController is currently just a renamed Vp8TemporalLayers,
but subsequent CLs will modify Vp8FrameBufferController in ways that are
not relevant for Vp8TemporalLayers. Namely:
1. Loss notifications will be added.
2. Packet-loss rate will be tracked.
3. RTT will be tracked.
4. Vp8FrameBufferController will be made injectable.
Vp8TemporalLayers is retained in order to:
1. Avoid needlessly changing api/.
2. Place for code shared between DefaultTemporalLayers and ScreenshareLayers.
We can remove it in the future (with a proper public announcement).
Bug: webrtc:10382
Change-Id: I49ad1b9bc1954d51bb0b5e60361985f1eb12ae9f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126045
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27009}
If minQP is reached and encoder undershoot consistently, we consider the
quality good enough and throttle encode frame rate.
Bug: webrtc:10310
Change-Id: Ifd07280040dd67ef6e544efdd4619d47bff951e8
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/125461
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27003}
If minQP is reached and encoder undershoot consistently, we consider the
quality good enough and throttle encode frame rate.
This CL also adds perf tests for high fps vp9 screenshare.
Bug: webrtc:10310
Change-Id: I49fc7d31f9f596a9ecb5f85fe9e0c7861d4915f9
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/125761
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26997}
In this CL:
- Updated Vp8TemporalLayers::OnEncodeDone to take a CodecSpecificInfo
instead of a CodecSpecificInfoVP8, so that both the VP8 specific and
generic information can be populated.
- Added structs to represent the GFD template structure.
- Added code to generate templates for video/screensharing.
Bug: webrtc:10342
Change-Id: I978f9d708597a6f86bbdc494e62acf7a7b400db3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/123422
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26987}
For a single layer vp9, the target bitrate was not set correctly. This
may cause a problem for screenshare case, since target bitrate is
respected in that case. If it were less than a min bitrate, the only
spatial layer was permanently disabled.
Bug: webrtc:10257
Change-Id: I0980349adfc2970f810acc51a3e2a31ecbb2bbd2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/125681
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26970}
there's no easy way to inject the Clock in ScreenshareLayers under
normal use. To allow faking the clock, rtc::TimeMillis is used instead.
Bug: webrtc:10365
Change-Id: I46c7f76514672190a0f0f5816a2c858bc6c76fa4
Reviewed-on: https://webrtc-review.googlesource.com/c/125189
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26946}
CodecSpecificInfo has a default constructor, so initializing by memset is not necessary and is in the way of adding non-trivial members.
Related chromium CL: https://chromium-review.googlesource.com/c/chromium/src/+/1495533
Bug: webrtc:10342
Change-Id: I36046f919f5fc34ea51de7288ff5c9cc0f2950b8
Reviewed-on: https://webrtc-review.googlesource.com/c/125093
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26924}
Simulcast screenshare appears broken due to unrelated changes. It
implicitly relied on SimulcastEncoderAdapter fallback, which happened before
if streams had same resolution. It's not the case anymore. Thus, this CL
adds checks for different frame-rate in simulcast streams.
FullStackTests are also updated to use actual parameters.
Bug: none
Change-Id: I2c1ddb1b39edb96464a0915dfcb9cb4e18844187
Reviewed-on: https://webrtc-review.googlesource.com/c/124494
Reviewed-by: Mirta Dvornicic <mirtad@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26869}
This quality boost means that we sometimes drop a _lot_ of frames in the
base layer. It also interacts poorly with the bitrate adjuster since
even if frames are dropped they are often over-sized.
The setting still leaves the current behavior as default, but can be
changed using the WebRTC-VideoRateControl field trial.
Bug: webrtc:10155
Change-Id: I1a92ec69bab61b5148fe9d8bc391ac5ee1019367
Reviewed-on: https://webrtc-review.googlesource.com/c/122840
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26659}
This CL continues the work began by CL #119958, extending it
to ScreenshareLayers.
Bug: webrtc:10249
Change-Id: I59d0c062a93b288007977e00aa3a2e0929509e0c
Reviewed-on: https://webrtc-review.googlesource.com/c/120042
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26526}
Prior to this CL, when software VP8 encoding was done with one temporal
layer, instead of only predicting from the latest frame, the code
allowed the encoder to reference the latest key frame as well.
This improves quality for the few frames immediately after
the key frame, but is not useful for later frames, which diverge
significantly from the key frame. However, the cost of producing
the prediction from more than one reference is incurred by all frames.
My measurements of the effect of this show an improvement
in CPU utilization of 5%-13% when this is not done.
foreman_352x288, 30fps, target bitrate 500kps
Pre-change:
send_enc_speed_fps: avg(566.187, 570.012, 575.665) = 570.621
send_avg_qp: 45.36
send_avg_psnr: 37.13
Post-change:
send_enc_speed_fps: avg(633.188, 604.694, 623.232) = 620.371
send_avg_qp: 45.88
send_avg_psnr: 37.0749
Improvement in send_enc_speed_fps: 8.71%
foreman_480x272, 30fps, target bitrate 500kps
Pre-change:
send_enc_speed_fps: avg(481.244, 486.971, 487.322) = 485.179
send_avg_qp: 48.9
send_avg_psnr: 37.6217
Post-change:
send_enc_speed_fps: avg(521.651, 499.416, 511.551) = 510.872
send_avg_qp: 48.88
send_avg_psnr: 37.6094
Improvement in send_enc_speed_fps: 5.29%
news_352x288, 30fps, target bitrate 500kps
Pre-change:
send_enc_speed_fps: avg(699.407, 697.837, 699.49) = 698.9113333
send_avg_qp: 24.15
send_avg_psnr: 40.9551
Post-change:
send_enc_speed_fps: avg(758.526, 768.104, 757.232) = 761.2873333
send_avg_qp: 23.9833
send_avg_psnr: 40.9697
Improvement in send_enc_speed_fps: 8.92%
Bridge_180x320_15 (video of brandtr@ from Google), 15fps, target bitrate 500kps
Pre-change:
send_enc_speed_fps: avg(454.757, 450.399, 446.812) = 450.656
send_avg_qp: 17.6771
send_avg_psnr: 39.9267
Post-change:
send_enc_speed_fps: avg(500.014, 513.316, 513.613) = 508.981
send_avg_qp: 17.6837
send_avg_psnr: 39.9137
Improvement in send_enc_speed_fps: 12.94%
Bug: webrtc:10281
Change-Id: If02736e1535c5f46689fd42b657e35a1e1f64d6d
Reviewed-on: https://webrtc-review.googlesource.com/c/120904
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26511}
Googletest recently started replacing the term Test Case by Test Suite.
From now on, the preferred API is TestSuite*; the older TestCase* API
will be slowly deprecated.
This CL moves WebRTC to the new set of APIs.
More info in [1].
This CL has been generated with this script:
declare -A items
items[TYPED_TEST_CASE]=TYPED_TEST_SUITE
items[TYPED_TEST_CASE_P]=TYPED_TEST_SUITE_P
items[REGISTER_TYPED_TEST_CASE_P]=REGISTER_TYPED_TEST_SUITE_P
items[INSTANTIATE_TYPED_TEST_CASE_P]=INSTANTIATE_TYPED_TEST_SUITE_P
items[INSTANTIATE_TEST_CASE_P]=INSTANTIATE_TEST_SUITE_P
for i in "${!items[@]}"
do
git ls-files | xargs sed -i "s/\b$i\b/${items[$i]}/g"
done
git cl format
[1] - https://github.com/google/googletest/blob/master/googletest/docs/primer.md#beware-of-the-nomenclature
Bug: None
Change-Id: I5ae191e3046caf347aeee01554d5743548ab0e3f
Reviewed-on: https://webrtc-review.googlesource.com/c/118701
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26494}
FrameConfig is not specific to temporal layers. Anything that
can control referenced/updated buffers could potentially use it.
Bug: webrtc:10259
Change-Id: I04ed177ee884693798c3b69e35fd4255ce1e9062
Reviewed-on: https://webrtc-review.googlesource.com/c/120355
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26448}
Prior to this CL, RtpPayloadParams had code that assumed
dependency patterns in VP8, in order to write that information
into the [Generic Frame Descriptor] RTP extension.
This CL starts moving that code out of RtpPayloadParams.
Upcoming CLs will migrate additional encoder-wrappers to
the new scheme, then remove the deprecated code.
Bug: webrtc:10249
Change-Id: I5fc84aedf8e11f79d52b989ff8b7ce9568b6cf32
Reviewed-on: https://webrtc-review.googlesource.com/c/119958
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26438}
The type rtc::scoped_refptr<T> is now part of api/. Please include it from
api/scoped_refptr.h.
More info: See: https://groups.google.com/forum/#!topic/discuss-webrtc/Mme2MSz4z4o.
Bug: webrtc:9887, webrtc:8205
No-Try: True
Change-Id: Ic6c7c81e226e59f12f7933e472f573ae097b55bf
Reviewed-on: https://webrtc-review.googlesource.com/c/119041
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26414}
This flag only needs to be set in kOn interlayer prediction mode, because
in all others, if new layer is enabled - a keyframe is generated.
Also, use external reference control in that case, because libvpx creates
rtp-incompatible references in that case.
Bug: webrtc:10180
Change-Id: I0fad188fa8cd424f831bac219769dbad3a788b1d
Reviewed-on: https://webrtc-review.googlesource.com/c/118041
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26316}
This CL add new data to the VideoEncoder::EncoderInfo struct, indicating
how the encoder intends to allocate frames across spatial and temporal
layers.
This metadata will be used in upcoming CLs to control how the encoder's
rate controller performs.
Bug: webrtc:10155
Change-Id: Id56fae04bae5f230d1a985171097d7ca83a3be8a
Reviewed-on: https://webrtc-review.googlesource.com/c/117900
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26300}
Use size() accessor function. Also replace most nearby uses of _buffer
with data().
Bug: webrtc:9378
Change-Id: I1ac3459612f7c6151bd057d05448da1c4e1c6e3d
Reviewed-on: https://webrtc-review.googlesource.com/c/116783
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26273}
Currently, CPU overuse settings for HW encoders are sometimes being used
even though the actual encoder is a SW encoder, e.g. in case of SW fallback
when the encoder is initialized. Polling is_hardware_accelerated after the
encoder has been created and initialized will improve choosing the correct
CPU overuse settings.
Bug: webrtc:10065
Change-Id: Ic6bd67630a040b5a121c13fa63dd074006973929
Reviewed-on: https://webrtc-review.googlesource.com/c/116688
Commit-Queue: Mirta Dvornicic <mirtad@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26266}
Previous attempt: https://codereview.webrtc.org/1882733006/. There
might be some benefit of having dummy encoder/decoder available in
video_loopback.
Bug: webrtc:5791
Change-Id: Iec316296754178c92b18dd3cf92f67ce6aed9439
Reviewed-on: https://webrtc-review.googlesource.com/c/112596
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Magnus Flodman <mflodman@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26043}
Without the added preprocessor check, iOS device will be using the desktop logic to determine the number of thread. This put iPhone 8 and iPhone X to use 3 threads and all other iPhones after iPhone 5 to use a single thread.
This CL added a preprocessor for WEBRTC_IOS to have it own thread number calculation logic. In which, the maximum number of thread is fetched from a field_trial and capped by the number of CPU available on the device.
Bug: webrtc:10005
Change-Id: I8c6257fcbf85b07bc986b5f733dbabb3feee37f7
Reviewed-on: https://webrtc-review.googlesource.com/c/110941
Commit-Queue: Jiawei Ou <ouj@fb.com>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Reviewed-by: Magnus Flodman <mflodman@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25997}
This is a reland of 4c0cc5bc5f
I added more Chrome checks for munging profiles in the below patch
that will allow us to land this without regressions.
https://chromium-review.googlesource.com/c/chromium/src/+/1366898
Original change's description:
> Reland Profile 2 to default profiles
>
> This is a reland after chrome browser tests are updated.
>
> Bug: webrtc:9376
> Change-Id: I818bf5d447da7901ffe49f2c452decb89196e829
> TBR: niklas.enbom@webrtc.org
> Reviewed-on: https://webrtc-review.googlesource.com/c/112060
> Reviewed-by: Emircan Uysaler <emircan@webrtc.org>
> Commit-Queue: Emircan Uysaler <emircan@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25778}
Bug: webrtc:9376
Change-Id: I8998537816a773961e519535c6afdde3801b5918
TBR: niklas.enbom@webrtc.org
Reviewed-on: https://webrtc-review.googlesource.com/c/113980
Commit-Queue: Emircan Uysaler <emircan@webrtc.org>
Reviewed-by: Emircan Uysaler <emircan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25977}
* Stop encoding spatial layers S(n >= N) if application deactivates
spatial layer N by setting RTCRtpEncodingParameters.active = false.
* Move calculation of padding bitrate to SvcRateAllocator class.
* Pad up to minimum required bitrate of base layer if ALR probing is
enabled.
Bug: webrtc:9350
Change-Id: I398284c943d43348def535c83263fc234c9767fa
Reviewed-on: https://webrtc-review.googlesource.com/c/113240
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25945}
Read using capacity() method, write using set_buffer() method. This is
a preparation for making the member private, and renaming it to
capacity_.
Bug: webrtc:9378
Change-Id: I2f96679d052a83fe81be40301bd9863c87074640
Reviewed-on: https://webrtc-review.googlesource.com/c/113520
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25934}
- Enable vp9 flexible mode in VideoEngine if 3 spatial layers are set.
- Enable flexible mode in loopback tools and quality tests.
- Reset first active spatial layer on keyframe in encoder.
- Ensure duplicate references are not set by the sender in video header.
- Set references manually for flexible mode in vp9 encoder.
- Delay new activated layers until next base layer frame.
- On receive side put each spatial layer as a separate frame to FrameBuffer
and return several frames combined from FrameBuffer.
Bug: webrtc:10049,webrtc:9794,webrtc:9784
Change-Id: I01e69f134cc145deba666ccc92deb1d37a324ede
Reviewed-on: https://webrtc-review.googlesource.com/c/112289
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25895}
See https://ci.chromium.org/p/chromium/builders/luci.chromium.webrtc/WebRTC%20Chromium%20Mac%20Tester
First, we figured that "ba2840c Various VP9 high fps fixes by Ilya Nikolaevskiy" was the cause and it was reverted but it did not help.
We must now try the other CL which had done changed in VP9.
Revert "Reland Profile 2 to default profiles"
This reverts commit 4c0cc5bc5f.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Reland Profile 2 to default profiles
>
> This is a reland after chrome browser tests are updated.
>
> Bug: webrtc:9376
> Change-Id: I818bf5d447da7901ffe49f2c452decb89196e829
> TBR: niklas.enbom@webrtc.org
> Reviewed-on: https://webrtc-review.googlesource.com/c/112060
> Reviewed-by: Emircan Uysaler <emircan@webrtc.org>
> Commit-Queue: Emircan Uysaler <emircan@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25778}
TBR=emircan@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:9376
Change-Id: I3eb935c08341ce51fa16717ed7b3be5f5253aa2f
Reviewed-on: https://webrtc-review.googlesource.com/c/112597
Reviewed-by: Henrik Andreassson <henrika@webrtc.org>
Commit-Queue: Henrik Andreassson <henrika@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25874}
kInvalid does not have a corresponding entry in the standard is therefore removed.
kUNSPECIFIED should be used instead.
Bug: webrtc:8651
Change-Id: Iee8cd85830aedaa4a9102251121b9975d40fa5e2
Reviewed-on: https://webrtc-review.googlesource.com/c/112421
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Commit-Queue: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25871}
This is the first step in moving the metadata and eventually replacing
VideoEncoderFactory::QueryVideoEncoder with VideoEncoder::GetEncoderInfo.
Bug: webrtc:10065
Change-Id: If925b895718e1b1225d2cf49bede1adb3ff281b8
Reviewed-on: https://webrtc-review.googlesource.com/c/112285
Commit-Queue: Mirta Dvornicic <mirtad@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25856}
This reverts commit ba2840ce4e.
Reason for revert: Looks like this breaks all VP9 tests on the Chromium level, for Mac: https://ci.chromium.org/buildbot/chromium.webrtc/Mac%20Tester/85866
Search for TIMED OUT in for instance https://logs.chromium.org/logs/chromium/bb/chromium.webrtc/Mac_Tester/85866/+/recipes/steps/browser_tests/0/stdout (it times out because the video is frozen).
Original change's description:
> Various VP9 high fps fixes
>
> - Enable flexible mode in loopback tools and quality tests
> - Ensure duplicate references are not set by the sender in video header
> - Reset first active spatial layer on keyframe in encoder
> - Make vp9 encoder to not generate spatial references for first active
> layer with external reference control in svc flexible mode
>
> Bug: webrtc:10049
> Change-Id: If9ff576ea8a1a2fef6116b17b5b5adff08c5f8c6
> Reviewed-on: https://webrtc-review.googlesource.com/c/112080
> Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
> Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#25795}
TBR=ilnik@webrtc.org,ssilkin@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:10049
Change-Id: Ie6a7daf6414337173fec38c5ff546d509951cba6
Reviewed-on: https://webrtc-review.googlesource.com/c/112400
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25842}
This is a follow-up to
https://webrtc-review.googlesource.com/c/src/+/106280.
This time the whole code base is covered.
Some files may have not been fixed though, whenever the IWYU tool
was breaking the build.
Bug: webrtc:8311
Change-Id: I2c31f552a87e887d33931d46e87b6208b1e483ef
Reviewed-on: https://webrtc-review.googlesource.com/c/111965
Commit-Queue: Yves Gerey <yvesg@google.com>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25830}
- Enable flexible mode in loopback tools and quality tests
- Ensure duplicate references are not set by the sender in video header
- Reset first active spatial layer on keyframe in encoder
- Make vp9 encoder to not generate spatial references for first active
layer with external reference control in svc flexible mode
Bug: webrtc:10049
Change-Id: If9ff576ea8a1a2fef6116b17b5b5adff08c5f8c6
Reviewed-on: https://webrtc-review.googlesource.com/c/112080
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25795}
Pass encoded frames to packetizer immediately if encoder is configured
to drop whole superframe.
Bug: webrtc:9950
Change-Id: Iedee9618bb146307efd5a86cb35bf14b5e64b341
Reviewed-on: https://webrtc-review.googlesource.com/c/109002
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25771}
Move HdrMetadata to ColorSpace as part of preparing for joint transmission
of these two objects.
Bug: webrtc:8651
Change-Id: Ie948011a2c0106d5967cb5ef3b9565217e798272
Reviewed-on: https://webrtc-review.googlesource.com/c/111481
Commit-Queue: Johannes Kron <kron@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25730}
This increases expected value of maximum buffer level in VP8/9 tests
up to 1 second and thus alignes it with the value that WebRTC uses by
default for these codecs.
Bug: webrtc:10017
Change-Id: I8fd41e8006f11c230d844a053c04656408c2ec97
Reviewed-on: https://webrtc-review.googlesource.com/c/111503
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25716}
Libvpx has been recently updated and this test was failing because
of a slightly different value.
TBR=sprang@webrtc.org
Bug: webrtc:10017
Change-Id: I5fe9161eef5c3e1ff8e0dceb36a663648d8f4617
Reviewed-on: https://webrtc-review.googlesource.com/c/111461
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25709}
Instead of optionally compile VP9 source files based on the value of
the GN argument 'rtc_libvpx_build_vp9', this CL uses the preprocessor
macro RTC_ENABLE_VP9 to decide if VP9 related code needs to be compiled
or not.
Bug: None
Change-Id: I5c1b69d7ec35e8446181d98c912277d0ae8fdba2
Reviewed-on: https://webrtc-review.googlesource.com/c/111063
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25685}
RTC_ENABLE_VP9 is more natural to deal with then RTC_DISABLE_VP9.
In all the places this macro is used, WebRTC needs to do more things
so it is easier to "do more if RTC_ENABLE_VP9 is defined" than
"do more if RTC_DISABLE_VP9 is not defined".
Bug: None
Change-Id: If992e5c554173e6af3f030f6e0fd21bd82acf9eb
No-Try: True
Reviewed-on: https://webrtc-review.googlesource.com/c/111242
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25679}
Compared the original CL: https://webrtc-review.googlesource.com/c/src/+/94782
This new CL added backward compatible functions to WebRtcMediaEngineFactory so that internal projects will not be broken.
Because of that, now we can revert all the changes to SDK and PeerConnection and do it in following CLs. This makes this CL cleaner.
One temporary disadvantage of this is the media engine now need to take a dependency onto builtin video bitrate factory, but practically it just moved code around and should not result in a large binary size change. We can remove this dependency later if needed.
Bug: webrtc:9513
Change-Id: I38708762ff365e4ca05974b99fac71edc739a756
Reviewed-on: https://webrtc-review.googlesource.com/c/109040
Commit-Queue: Jiawei Ou <ouj@fb.com>
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Seth Hampson <shampson@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25574}
If rate controller is trusted, we disable the frame dropper in the
media optimization module.
This is a re-land of
https://webrtc-review.googlesource.com/c/src/+/105020
Bug: webrtc:9890
Change-Id: I418e47a43a1a98cb2fd5295c03360b954f2288f2
Reviewed-on: https://webrtc-review.googlesource.com/c/109141
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25570}
The SetChannelParameters function was used when WebRTC supported decoding
with errors, which we no longer do.
This cleanup CL is related to the work tracked by 9946.
Bug: webrtc:9946
Change-Id: Id2d5ed23031388f890c42651bfbe5f79eda701e5
Reviewed-on: https://webrtc-review.googlesource.com/c/108861
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25505}
This is a cleanup CL related to the work tracked by 9946.
Bug: webrtc:9946
Change-Id: I3d879196af83856ece1418fa786aab03a3dd3c8c
Reviewed-on: https://webrtc-review.googlesource.com/c/108820
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25466}
This is just a cleanup CL related to the work tracked by 9946.
Bug: webrtc:9946
Change-Id: I9a8347aa382bf44f3cd6c38d89bea0e9d68a50e0
Reviewed-on: https://webrtc-review.googlesource.com/c/108781
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25464}
Remove them from test.
It is completion of the move started with
https://webrtc-review.googlesource.com/c/src/+/107705
Bug: None
Change-Id: Ib0b26db04a1ee814322851280ba1e59b4b3f7ce6
Reviewed-on: https://webrtc-review.googlesource.com/c/107891
Commit-Queue: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25392}
This deprecates the following methods in VideoEncoder:
virtual ScalingSettings GetScalingSettings() const;
virtual bool SupportsNativeHandle() const;
virtual const char* ImplementationName() const;
Though they are not marked RTC_DEPRECATED since we still want to call
them from within the default GetEncoderInfo() until downstream
projects have been updated.
Furthmore, implementation name is changed from const char* to
std:string, which prevents some lifetime issues with dynamic encoder
names, and CodecSpecificInfo.codec_name is removed in favor of getting
the implementation name via GetEncoderInfo().
This CL removes calls to these deprecated methods, follow-ups will also
remove implementations of the methods and replace them with new
GetEncoderInfo() substitutions.
Bug: webrtc:9890
Change-Id: I6fd6e531480c0b952f53dbd5105e0b0adc3e3b0c
Reviewed-on: https://webrtc-review.googlesource.com/c/106905
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25351}
This CL uses RTC_EXPORT (defined in rtc_base/system/rtc_export.h)
to mark WebRTC symbols as visible from a shared library, this doesn't
mean these symbols are part of the public API (please continue to refer
to [1] for info about what is considered public WebRTC API).
Bug: webrtc:9419
Change-Id: I4d4e2ae52ee01de68147fd0f2cfe4c92d600ad94
Reviewed-on: https://webrtc-review.googlesource.com/c/106343
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25207}
Only used for output filename nowadays. Previously, it was used for
selecting the codec implementation. That is now done by injecting
the appropriate codec factory.
Bug: webrtc:9317
Change-Id: Ia2bf28f7df165fb65410ecd1f5d646ee6604e1be
Reviewed-on: https://webrtc-review.googlesource.com/c/106023
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25204}
Move MockVideoDecoder from
modules/video_coding/include/mock/mock_video_codec_interface.h
to
api/test/mock_video_decoder.h
The mock encoder has already moved:
https://webrtc-review.googlesource.com/c/src/+/105620
Keeping the old header until downstream projects have been updated.
Bug: webrtc:9722
Change-Id: I4bc849173a04813064212f17761876695ca3fed4
Reviewed-on: https://webrtc-review.googlesource.com/c/105900
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25170}
Also renaming it Vp8TemporalLayers to show that it is codec specific.
Bug: webrtc:9012
Change-Id: I18187538b8142cdd7538f1a4ed1bada09d040f1f
Reviewed-on: https://webrtc-review.googlesource.com/c/104643
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25137}
